andard and/or project
ICS
TC
ISO 1179-1:2013
23.100.40
ISO/TC 131/SC 4
Connections for general use and fluid power -- Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing -- Part 1: Threaded ports
ISO 1179-2:2013
23.100.40
ISO/TC 131/SC 4
Connections for general use and fluid power -- Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing -- Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)
ISO 1179-3:2007
23.100.40
ISO/TC 131/SC 4
Connections for general use and fluid power -- Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing -- Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H)
ISO 1179-4:2007
23.100.40
ISO/TC 131/SC 4
Connections for general use and fluid power -- Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing -- Part 4: Stud ends for general use only with metal-to-metal sealing (type B)
ISO 1219-1:2012
01.080.30
ISO/TC 131
Fluid power systems and components -- Graphical symbols and circuit diagrams -- Part 1: Graphical symbols for conventional use and data-processing applications
23.100.01
ISO 1219-2:2012
23.100.01
ISO/TC 131
Fluid power systems and components -- Graphical symbols and circuit diagrams -- Part 2: Circuit diagrams
01.080.30
ISO 2941:2009
23.100.60
ISO/TC 131/SC 6
Hydraulic fluid power -- Filter elements -- Verification of collapse/burst pressure rating
ISO 2942:2004
23.100.60
ISO/TC 131/SC 6
Hydraulic fluid power -- Filter elements -- Verification of fabrication integrity and determination of the first bubble point
ISO 2943:1998
23.100.60
ISO/TC 131/SC 6
Hydraulic fluid power -- Filter elements -- Verification of material compatibility with fluids
ISO 2944:2000
23.100.01
ISO/TC 131
Fluid power systems and components -- Nominal pressures
ISO 3019-1:2001
23.100.10
ISO/TC 131/SC 2
Hydraulic fluid power -- Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors -- Part 1: Inch series shown in metric units
ISO 3019-2:2001
23.100.10
ISO/TC 131/SC 2
Hydraulic fluid power -- Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors -- Part 2: Metric series
ISO 3019-2:2001/Cor 1:2006
23.100.10
ISO/TC 131/SC 2
ISO 3320:2013
23.100.20
ISO/TC 131/SC 3
Fluid power systems and components -- Cylinder bores and piston rod diameters and area ratios -- Metric series
ISO 3321:1975
23.100.20
ISO/TC 131/SC 3
Fluid power systems and components -- Cylinder bores and piston rod diameters -- Inch series
ISO 3601-1:2012
83.140.50
ISO/TC 131/SC 7
Fluid power systems -- O-rings -- Part 1: Inside diameters, cross-sections, tolerances and designation codes
23.100.60
ISO 3601-1:2012/Cor 1:2012
83.140.50
ISO/TC 131/SC 7
23.100.60
ISO 3601-2:2008
83.140.50
ISO/TC 131/SC 7
Fluid power systems -- O-rings -- Part 2: Housing dimensions for general applications
23.100.60
ISO 3601-3:2005
83.140.50
ISO/TC 131/SC 7
Fluid power systems -- O-rings -- Part 3: Quality acceptance criteria
23.100.60
ISO 3601-4:2008
83.140.50
ISO/TC 131/SC 7
Fluid power systems -- O-rings -- Part 4: Anti-extrusion rings (back-up rings)
23.100.60
ISO 3601-5:2002
23.100.60
ISO/TC 131/SC 7
Fluid power systems -- O-rings -- Part 5: Suitability of elastomeric materials for industrial applications
83.140.50
ISO 3662:1976
23.100.10
ISO/TC 131/SC 2
Hydraulic fluid power -- Pumps and motors -- Geometric displacements
ISO 3722:1976
23.100.99
ISO/TC 131/SC 6
Hydraulic fluid power -- Fluid sample containers -- Qualifying and controlling cleaning methods
ISO 3723:1976
23.100.60
ISO/TC 131/SC 6
Hydraulic fluid power -- Filter elements -- Method for end load test
ISO 3724:2007
23.100.60
ISO/TC 131/SC 6
Hydraulic fluid power -- Filter elements -- Determination of resistance to flow fatigue using particulate contaminant
ISO 3938:1986
23.100.60
ISO/TC 131/SC 6
Hydraulic fluid power -- Contamination analysis -- Method for reporting analysis data
ISO 3939:1977
23.100.99
ISO/TC 131/SC 7
Fluid power systems and components -- Multiple lip packing sets -- Methods for measuring stack heights
83.140.50
ISO 3968:2001
23.100.60
ISO/TC 131/SC 6
Hydraulic fluid power -- Filters -- Evaluation of differential pressure versus flow characteristics
ISO 3968:2001/Cor 1:2002
23.100.60
ISO/TC 131/SC 6
ISO 4021:1992
23.100.60
ISO/TC 131/SC 6
Hydraulic fluid power -- Particulate contamination analysis -- Extraction of fluid samples from lines of an operating system
ISO 4391:1983
23.100.10
ISO/TC 131/SC 2
Hydraulic fluid power -- Pumps, motors and integral transmissions -- Parameter definitions and letter symbols
ISO 4392-1:2002
23.100.10
ISO/TC 131/SC 8
Hydraulic fluid power -- Determination of characteristics of motors -- Part 1: At constant low speed and constant pressure
ISO 4392-2:2002
23.100.10
ISO/TC 131/SC 8
Hydraulic fluid power -- Determination of characteristics of motors -- Part 2: Startability
ISO 4392-3:1993
23.100.10
ISO/TC 131/SC 8
Hydraulic fluid power -- Determination of characteristics of motors -- Part 3: At constant flow and at constant torque
ISO 4393:1978
23.100.20
ISO/TC 131/SC 3
Fluid power systems and components -- Cylinders -- Basic series of piston strokes
ISO 4394-1:1980
23.100.20
ISO/TC 131/SC 3
Fluid power systems and components -- Cylinder barrels -- Part 1: Requirements for steel tubes with specially finished bores
ISO 4395:2009
23.100.20
ISO/TC 131/SC 3
Fluid power systems and components -- Cylinder piston rod end types and dimensions
ISO 4395:2009/Cor 1:2010
23.100.20
ISO/TC 131/SC 3
ISO 4397:2011
23.100.40
ISO/TC 131/SC 4
Fluid power connectors and associated components -- Nominal outside diameters of tubes and nominal hose sizes
ISO 4399:1995
23.100.40
ISO/TC 131/SC 4
Fluid power systems and components -- Connectors and associated components -- Nominal pressures
ISO 4400:1994
23.100.99
ISO/TC 131/SC 5
Fluid power systems and components -- Three-pin electrical plug connectors with earth contact -- Characteristics and requirements
ISO 4401:2005
23.100.50
ISO/TC 131/SC 5
Hydraulic fluid power -- Four-port directional control valves -- Mounting surfaces
ISO 4405:1991
23.100.60
ISO/TC 131/SC 6
Hydraulic fluid power -- Fluid contamination -- Determination of particulate contamination by the gravimetric method
ISO 4406:1999
75.120
ISO/TC 131/SC 6
Hydraulic fluid power -- Fluids -- Method for coding the level of contamination by solid particles
23.100.60
ISO 4407:2002
23.100.60
ISO/TC 131/SC 6
Hydraulic fluid power -- Fluid contamination -- Determination of particulate contamination by the counting method using an optical microscope
ISO 4409:2007
23.100.10
ISO/TC 131/SC 8
Hydraulic fluid power -- Positive-displacement pumps, motors and integral transmissions -- Methods of testing and presenting basic steady state performance
ISO 4411:2008
23.100.50
ISO/TC 131/SC 5
Hydraulic fluid power -- Valves -- Determination of pressure differential/flow characteristics
ISO 4412-1:1991
17.140.20
ISO/TC 131/SC 8
Hydraulic fluid power -- Test code for determination of airborne noise levels -- Part 1: Pumps
23.100.10
ISO 4412-2:1991
17.140.20
ISO/TC 131/SC 8
Hydraulic fluid power -- Test code for determination of airborne noise levels -- Part 2: Motors
23.100.10
ISO 4412-3:1991
23.100.10
ISO/TC 131/SC 8
Hydraulic fluid power -- Test code for determination of airborne noise levels -- Part 3: Pumps -- Method using a parallelepiped microphone array
17.140.20
ISO 4413:2010
23.100.01
ISO/TC 131/SC 9
Hydraulic fluid power -- General rules and safety requirements for systems and their components
ISO 4414:2010
23.100.01
ISO/TC 131/SC 9
Pneumatic fluid power -- General rules and safety requirements for systems and their components
ISO 5596:1999
23.100.99
ISO/TC 131
Hydraulic fluid power -- Gas-loaded accumulators with separator -- Ranges of pressures and volumes and characteristic quantities
ISO 5597:2010
23.100.20
ISO/TC 131/SC 7
Hydraulic fluid power -- Cylinders -- Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications
ISO 5598:2008
23.100.01
ISO/TC 131
Fluid power systems and components -- Vocabulary
01.040.23
ISO 5599-1:2001
23.100.50
ISO/TC 131/SC 5
Pneumatic fluid power -- Five-port directional control valves -- Part 1: Mounting interface surfaces without electrical connector
ISO 5599-1:2001/Cor 1:2007
23.100.50
ISO/TC 131/SC 5
ISO 5599-2:2001
23.100.50
ISO/TC 131/SC 5
Pneumatic fluid power -- Five-port directional control valves -- Part 2: Mounting interface surfaces with optional electrical connector
ISO 5599-2:2001/Amd 1:2004
23.100.50
ISO/TC 131/SC 5
ISO 5599-2:2001/Cor 1:2007
23.100.50
ISO/TC 131/SC 5
ISO 5781:2000
23.100.50
ISO/TC 131/SC 5
Hydraulic fluid power -- Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves -- Mounting surfaces
ISO 5782-1:1997
23.100.60
ISO/TC 131/SC 5
Pneumatic fluid power -- Compressed-air filters -- Part 1: Main characteristics to be included in suppliers' literature and product marking requirements
ISO 5782-2:1997
23.100.60
ISO/TC 131/SC 5
Pneumatic fluid power -- Compressed-air filters -- Part 2: Test methods to determine the main characteristics to be included in supplier's literature
ISO 5783:1995
23.100.50
ISO/TC 131/SC 5
Hydraulic fluid power -- Code for identification of valve mounting surfaces and cartridge valve cavities
ISO 5784-1:1988
01.080.30
ISO/TC 131/SC 5
Fluid power systems and components -- Fluid logic circuits -- Part 1: Symbols for binary logic and related functions
23.100.01
ISO 5784-2:1989
01.080.30
ISO/TC 131/SC 5
Fluid power systems and components -- Fluid logic circuits -- Part 2: Symbols for supply and exhausts as related to logic symbols
23.100.01
ISO 5784-3:1989
01.080.30
ISO/TC 131/SC 5
Fluid power systems and components -- Fluid logic circuits -- Part 3: Symbols for logic sequencers and related functions
23.100.01
ISO 6020-1:2007
23.100.20
ISO/TC 131/SC 3
Hydraulic fluid power -- Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series -- Part 1: Medium series
ISO 6020-2:2006
23.100.20
ISO/TC 131/SC 3
Hydraulic fluid power -- Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series -- Part 2: Compact series
ISO 6020-2:2006/Cor 1:2008
23.100.20
ISO/TC 131/SC 3
ISO 6020-3:1994
23.100.20
ISO/TC 131/SC 3
Hydraulic fluid power -- Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series -- Part 3: Compact series with bores from 250 mm to 500 mm
ISO 6022:2006
23.100.20
ISO/TC 131/SC 3
Hydraulic fluid power -- Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series
ISO 6099:2009
23.100.20
ISO/TC 131/SC 3
Fluid power systems and components -- Cylinders -- Identification code for mounting dimensions and mounting types
ISO 6149-1:2006
23.100.40
ISO/TC 131/SC 4
Connections for hydraulic fluid power and general use -- Ports and stud ends with ISO 261 metric threads and O-ring sealing -- Part 1: Ports with truncated housing for O-ring seal
ISO 6149-2:2006
23.100.40
ISO/TC 131/SC 4
Connections for hydraulic fluid power and general use -- Ports and stud ends with ISO 261 metric threads and O-ring sealing -- Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends
ISO 6149-3:2006
23.100.40
ISO/TC 131/SC 4
Connections for hydraulic fluid power and general use -- Ports and stud ends with ISO 261 metric threads and O-ring sealing -- Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends
ISO 6149-4:2006
23.100.40
ISO/TC 131/SC 4
Connections for fluid power and general use -- Ports and stud ends with ISO 261 metric threads and O-ring sealing -- Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
ISO 6150:1988
23.100.40
ISO/TC 131/SC 4
Pneumatic fluid power -- Cylindrical quick-action couplings for maximum working pressures of 10 bar, 16 bar and 25 bar (1 MPa, 1,6 Mpa, and 2,5 MPa) -- Plug connecting dimensions, specifications, application guidelines and testing
ISO 6162-1:2012
23.100.40
ISO/TC 131/SC 4
Hydraulic fluid power -- Flange connections with split or one-piece flange clamps and metric or inch screws -- Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
ISO 6162-2:2012
23.100.40
ISO/TC 131/SC 4
Hydraulic fluid power -- Flange connections with split or one-piece flange clamps and metric or inch screws -- Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76
ISO 6164:1994
23.100.40
ISO/TC 131/SC 4
Hydraulic fluid power -- Four-screw, one-piece square-flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar)
ISO 6194-1:2007
23.100.60
ISO/TC 131/SC 7
Rotary shaft lip-type seals incorporating elastomeric sealing elements -- Part 1: Nominal dimensions and tolerances
83.140.50
ISO 6194-2:2009
23.100.60
ISO/TC 131/SC 7
Rotary shaft lip-type seals incorporating elastomeric sealing elements -- Part 2: Vocabulary
83.140.50
01.040.83
01.040.23
ISO 6194-3:2009
83.140.50
ISO/TC 131/SC 7
Rotary shaft lip-type seals incorporating elastomeric sealing elements -- Part 3: Storage, handling and installation
23.100.60
ISO 6194-4:2009
83.140.50
ISO/TC 131/SC 7
Rotary shaft lip-type seals incorporating elastomeric sealing elements -- Part 4: Performance test procedures
23.100.60
ISO 6194-5:2008
83.140.50
ISO/TC 131/SC 7
Rotary-shaft lip-type seals incorporating elastomeric sealing elements -- Part 5: Identification of visual imperfections
23.100.60
ISO 6195:2013
23.100.20
ISO/TC 131/SC 7
Fluid power systems and components -- Cylinder-rod wiper-ring housings in reciprocating applications -- Dimensions and tolerances
ISO 6263:2013
23.100.50
ISO/TC 131/SC 5
Hydraulic fluid power -- Compensated flow-control valves -- Mounting surfaces
ISO 6264:1998
23.100.50
ISO/TC 131/SC 5
Hydraulic fluid power -- Pressure-relief valves -- Mounting surfaces
ISO 6301-1:2009
23.100.99
ISO/TC 131/SC 5
Pneumatic fluid power -- Compressed-air lubricators -- Part 1: Main characteristics to be included in supplier's literature and product-marking requirements
ISO 6301-2:2006
23.100.99
ISO/TC 131/SC 5
Pneumatic fluid power -- Compressed-air lubricators -- Part 2: Test methods to determine the main characteristics to be included in supplier's literature
ISO 6358:1989
23.100.01
ISO/TC 131/SC 8
Pneumatic fluid power -- Components using compressible fluids -- Determination of flow-rate characteristics
ISO 6358-1:2013
23.100.01
ISO/TC 131/SC 5
Pneumatic fluid power -- Determination of flow-rate characteristics of components using compressible fluids -- Part 1: General rules and test methods for steady-state flow
ISO 6358-2:2013
23.100.01
ISO/TC 131/SC 5
Pneumatic fluid power -- Determination of flow-rate characteristics of components using compressible fluids -- Part 2: Alternative test methods
ISO 6403:1988
23.100.50
Makinanınız için gerekli olan tüm hidrolik kompanentler tek bir adresten hizmetinize sunulmaktadır. Hidrolik sistem mühendisliği konusunda 20 yıllık tecrübe ile dünyanın seçkin markalarıyla güçlü işbirliklerimiz ve Sektördeki yeni teknolojileri takip ederek size mükemmel ve rekabetci çözümler sunmaktayız.
Sizin için size özel çözümler üretiyoruz.
Devamı
Copyright © 2026 - Hidroman.com.tr | sitebizden | www.hidroman.com.tr