İçeriğe geç

ISO Standards for Hydraulic and Pneumatic Systems

ISO Standards for Hydraulic and Pneumatic Systems

ISO Standards for Hydraulic and Pneumatic Systems

andard and/or project ICS TC
ISO 1179-1:2013 23.100.40 ISO/TC 131/SC 4
Connections for general use and fluid power -- Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing -- Part 1: Threaded ports
ISO 1179-2:2013 23.100.40 ISO/TC 131/SC 4
Connections for general use and fluid power -- Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing -- Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)
ISO 1179-3:2007 23.100.40 ISO/TC 131/SC 4
Connections for general use and fluid power -- Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing -- Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H)
ISO 1179-4:2007 23.100.40 ISO/TC 131/SC 4
Connections for general use and fluid power -- Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing -- Part 4: Stud ends for general use only with metal-to-metal sealing (type B)
ISO 1219-1:2012 01.080.30 ISO/TC 131
Fluid power systems and components -- Graphical symbols and circuit diagrams -- Part 1: Graphical symbols for conventional use and data-processing applications 23.100.01
ISO 1219-2:2012 23.100.01 ISO/TC 131
Fluid power systems and components -- Graphical symbols and circuit diagrams -- Part 2: Circuit diagrams 01.080.30
ISO 2941:2009 23.100.60 ISO/TC 131/SC 6
Hydraulic fluid power -- Filter elements -- Verification of collapse/burst pressure rating
ISO 2942:2004 23.100.60 ISO/TC 131/SC 6
Hydraulic fluid power -- Filter elements -- Verification of fabrication integrity and determination of the first bubble point
ISO 2943:1998 23.100.60 ISO/TC 131/SC 6
Hydraulic fluid power -- Filter elements -- Verification of material compatibility with fluids
ISO 2944:2000 23.100.01 ISO/TC 131
Fluid power systems and components -- Nominal pressures
ISO 3019-1:2001 23.100.10 ISO/TC 131/SC 2
Hydraulic fluid power -- Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors -- Part 1: Inch series shown in metric units
ISO 3019-2:2001 23.100.10 ISO/TC 131/SC 2
Hydraulic fluid power -- Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors -- Part 2: Metric series
ISO 3019-2:2001/Cor 1:2006 23.100.10 ISO/TC 131/SC 2
ISO 3320:2013 23.100.20 ISO/TC 131/SC 3
Fluid power systems and components -- Cylinder bores and piston rod diameters and area ratios -- Metric series
ISO 3321:1975 23.100.20 ISO/TC 131/SC 3
Fluid power systems and components -- Cylinder bores and piston rod diameters -- Inch series
ISO 3601-1:2012 83.140.50 ISO/TC 131/SC 7
Fluid power systems -- O-rings -- Part 1: Inside diameters, cross-sections, tolerances and designation codes 23.100.60
ISO 3601-1:2012/Cor 1:2012 83.140.50 ISO/TC 131/SC 7
23.100.60
ISO 3601-2:2008 83.140.50 ISO/TC 131/SC 7
Fluid power systems -- O-rings -- Part 2: Housing dimensions for general applications 23.100.60
ISO 3601-3:2005 83.140.50 ISO/TC 131/SC 7
Fluid power systems -- O-rings -- Part 3: Quality acceptance criteria 23.100.60
ISO 3601-4:2008 83.140.50 ISO/TC 131/SC 7
Fluid power systems -- O-rings -- Part 4: Anti-extrusion rings (back-up rings) 23.100.60
ISO 3601-5:2002 23.100.60 ISO/TC 131/SC 7
Fluid power systems -- O-rings -- Part 5: Suitability of elastomeric materials for industrial applications 83.140.50
ISO 3662:1976 23.100.10 ISO/TC 131/SC 2
Hydraulic fluid power -- Pumps and motors -- Geometric displacements
ISO 3722:1976 23.100.99 ISO/TC 131/SC 6
Hydraulic fluid power -- Fluid sample containers -- Qualifying and controlling cleaning methods
ISO 3723:1976 23.100.60 ISO/TC 131/SC 6
Hydraulic fluid power -- Filter elements -- Method for end load test
ISO 3724:2007 23.100.60 ISO/TC 131/SC 6
Hydraulic fluid power -- Filter elements -- Determination of resistance to flow fatigue using particulate contaminant
ISO 3938:1986 23.100.60 ISO/TC 131/SC 6
Hydraulic fluid power -- Contamination analysis -- Method for reporting analysis data
ISO 3939:1977 23.100.99 ISO/TC 131/SC 7
Fluid power systems and components -- Multiple lip packing sets -- Methods for measuring stack heights 83.140.50
ISO 3968:2001 23.100.60 ISO/TC 131/SC 6
Hydraulic fluid power -- Filters -- Evaluation of differential pressure versus flow characteristics
ISO 3968:2001/Cor 1:2002 23.100.60 ISO/TC 131/SC 6
ISO 4021:1992 23.100.60 ISO/TC 131/SC 6
Hydraulic fluid power -- Particulate contamination analysis -- Extraction of fluid samples from lines of an operating system
ISO 4391:1983 23.100.10 ISO/TC 131/SC 2
Hydraulic fluid power -- Pumps, motors and integral transmissions -- Parameter definitions and letter symbols
ISO 4392-1:2002 23.100.10 ISO/TC 131/SC 8
Hydraulic fluid power -- Determination of characteristics of motors -- Part 1: At constant low speed and constant pressure
ISO 4392-2:2002 23.100.10 ISO/TC 131/SC 8
Hydraulic fluid power -- Determination of characteristics of motors -- Part 2: Startability
ISO 4392-3:1993 23.100.10 ISO/TC 131/SC 8
Hydraulic fluid power -- Determination of characteristics of motors -- Part 3: At constant flow and at constant torque
ISO 4393:1978 23.100.20 ISO/TC 131/SC 3
Fluid power systems and components -- Cylinders -- Basic series of piston strokes
ISO 4394-1:1980 23.100.20 ISO/TC 131/SC 3
Fluid power systems and components -- Cylinder barrels -- Part 1: Requirements for steel tubes with specially finished bores
ISO 4395:2009 23.100.20 ISO/TC 131/SC 3
Fluid power systems and components -- Cylinder piston rod end types and dimensions
ISO 4395:2009/Cor 1:2010 23.100.20 ISO/TC 131/SC 3
ISO 4397:2011 23.100.40 ISO/TC 131/SC 4
Fluid power connectors and associated components -- Nominal outside diameters of tubes and nominal hose sizes
ISO 4399:1995 23.100.40 ISO/TC 131/SC 4
Fluid power systems and components -- Connectors and associated components -- Nominal pressures
ISO 4400:1994 23.100.99 ISO/TC 131/SC 5
Fluid power systems and components -- Three-pin electrical plug connectors with earth contact -- Characteristics and requirements
ISO 4401:2005 23.100.50 ISO/TC 131/SC 5
Hydraulic fluid power -- Four-port directional control valves -- Mounting surfaces
ISO 4405:1991 23.100.60 ISO/TC 131/SC 6
Hydraulic fluid power -- Fluid contamination -- Determination of particulate contamination by the gravimetric method
ISO 4406:1999 75.120 ISO/TC 131/SC 6
Hydraulic fluid power -- Fluids -- Method for coding the level of contamination by solid particles 23.100.60
ISO 4407:2002 23.100.60 ISO/TC 131/SC 6
Hydraulic fluid power -- Fluid contamination -- Determination of particulate contamination by the counting method using an optical microscope
ISO 4409:2007 23.100.10 ISO/TC 131/SC 8
Hydraulic fluid power -- Positive-displacement pumps, motors and integral transmissions -- Methods of testing and presenting basic steady state performance
ISO 4411:2008 23.100.50 ISO/TC 131/SC 5
Hydraulic fluid power -- Valves -- Determination of pressure differential/flow characteristics
ISO 4412-1:1991 17.140.20 ISO/TC 131/SC 8
Hydraulic fluid power -- Test code for determination of airborne noise levels -- Part 1: Pumps 23.100.10
ISO 4412-2:1991 17.140.20 ISO/TC 131/SC 8
Hydraulic fluid power -- Test code for determination of airborne noise levels -- Part 2: Motors 23.100.10
ISO 4412-3:1991 23.100.10 ISO/TC 131/SC 8
Hydraulic fluid power -- Test code for determination of airborne noise levels -- Part 3: Pumps -- Method using a parallelepiped microphone array 17.140.20
ISO 4413:2010 23.100.01 ISO/TC 131/SC 9
Hydraulic fluid power -- General rules and safety requirements for systems and their components
ISO 4414:2010 23.100.01 ISO/TC 131/SC 9
Pneumatic fluid power -- General rules and safety requirements for systems and their components
ISO 5596:1999 23.100.99 ISO/TC 131
Hydraulic fluid power -- Gas-loaded accumulators with separator -- Ranges of pressures and volumes and characteristic quantities
ISO 5597:2010 23.100.20 ISO/TC 131/SC 7
Hydraulic fluid power -- Cylinders -- Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications
ISO 5598:2008 23.100.01 ISO/TC 131
Fluid power systems and components -- Vocabulary 01.040.23
ISO 5599-1:2001 23.100.50 ISO/TC 131/SC 5
Pneumatic fluid power -- Five-port directional control valves -- Part 1: Mounting interface surfaces without electrical connector
ISO 5599-1:2001/Cor 1:2007 23.100.50 ISO/TC 131/SC 5
ISO 5599-2:2001 23.100.50 ISO/TC 131/SC 5
Pneumatic fluid power -- Five-port directional control valves -- Part 2: Mounting interface surfaces with optional electrical connector
ISO 5599-2:2001/Amd 1:2004 23.100.50 ISO/TC 131/SC 5
ISO 5599-2:2001/Cor 1:2007 23.100.50 ISO/TC 131/SC 5
ISO 5781:2000 23.100.50 ISO/TC 131/SC 5
Hydraulic fluid power -- Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves -- Mounting surfaces
ISO 5782-1:1997 23.100.60 ISO/TC 131/SC 5
Pneumatic fluid power -- Compressed-air filters -- Part 1: Main characteristics to be included in suppliers' literature and product marking requirements
ISO 5782-2:1997 23.100.60 ISO/TC 131/SC 5
Pneumatic fluid power -- Compressed-air filters -- Part 2: Test methods to determine the main characteristics to be included in supplier's literature
ISO 5783:1995 23.100.50 ISO/TC 131/SC 5
Hydraulic fluid power -- Code for identification of valve mounting surfaces and cartridge valve cavities
ISO 5784-1:1988 01.080.30 ISO/TC 131/SC 5
Fluid power systems and components -- Fluid logic circuits -- Part 1: Symbols for binary logic and related functions 23.100.01
ISO 5784-2:1989 01.080.30 ISO/TC 131/SC 5
Fluid power systems and components -- Fluid logic circuits -- Part 2: Symbols for supply and exhausts as related to logic symbols 23.100.01
ISO 5784-3:1989 01.080.30 ISO/TC 131/SC 5
Fluid power systems and components -- Fluid logic circuits -- Part 3: Symbols for logic sequencers and related functions 23.100.01
ISO 6020-1:2007 23.100.20 ISO/TC 131/SC 3
Hydraulic fluid power -- Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series -- Part 1: Medium series
ISO 6020-2:2006 23.100.20 ISO/TC 131/SC 3
Hydraulic fluid power -- Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series -- Part 2: Compact series
ISO 6020-2:2006/Cor 1:2008 23.100.20 ISO/TC 131/SC 3
ISO 6020-3:1994 23.100.20 ISO/TC 131/SC 3
Hydraulic fluid power -- Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series -- Part 3: Compact series with bores from 250 mm to 500 mm
ISO 6022:2006 23.100.20 ISO/TC 131/SC 3
Hydraulic fluid power -- Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series
ISO 6099:2009 23.100.20 ISO/TC 131/SC 3
Fluid power systems and components -- Cylinders -- Identification code for mounting dimensions and mounting types
ISO 6149-1:2006 23.100.40 ISO/TC 131/SC 4
Connections for hydraulic fluid power and general use -- Ports and stud ends with ISO 261 metric threads and O-ring sealing -- Part 1: Ports with truncated housing for O-ring seal
ISO 6149-2:2006 23.100.40 ISO/TC 131/SC 4
Connections for hydraulic fluid power and general use -- Ports and stud ends with ISO 261 metric threads and O-ring sealing -- Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends
ISO 6149-3:2006 23.100.40 ISO/TC 131/SC 4
Connections for hydraulic fluid power and general use -- Ports and stud ends with ISO 261 metric threads and O-ring sealing -- Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends
ISO 6149-4:2006 23.100.40 ISO/TC 131/SC 4
Connections for fluid power and general use -- Ports and stud ends with ISO 261 metric threads and O-ring sealing -- Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
ISO 6150:1988 23.100.40 ISO/TC 131/SC 4
Pneumatic fluid power -- Cylindrical quick-action couplings for maximum working pressures of 10 bar, 16 bar and 25 bar (1 MPa, 1,6 Mpa, and 2,5 MPa) -- Plug connecting dimensions, specifications, application guidelines and testing
ISO 6162-1:2012 23.100.40 ISO/TC 131/SC 4
Hydraulic fluid power -- Flange connections with split or one-piece flange clamps and metric or inch screws -- Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
ISO 6162-2:2012 23.100.40 ISO/TC 131/SC 4
Hydraulic fluid power -- Flange connections with split or one-piece flange clamps and metric or inch screws -- Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76
ISO 6164:1994 23.100.40 ISO/TC 131/SC 4
Hydraulic fluid power -- Four-screw, one-piece square-flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar)
ISO 6194-1:2007 23.100.60 ISO/TC 131/SC 7
Rotary shaft lip-type seals incorporating elastomeric sealing elements -- Part 1: Nominal dimensions and tolerances 83.140.50
ISO 6194-2:2009 23.100.60 ISO/TC 131/SC 7
Rotary shaft lip-type seals incorporating elastomeric sealing elements -- Part 2: Vocabulary 83.140.50
  01.040.83
  01.040.23
ISO 6194-3:2009 83.140.50 ISO/TC 131/SC 7
Rotary shaft lip-type seals incorporating elastomeric sealing elements -- Part 3: Storage, handling and installation 23.100.60
ISO 6194-4:2009 83.140.50 ISO/TC 131/SC 7
Rotary shaft lip-type seals incorporating elastomeric sealing elements -- Part 4: Performance test procedures 23.100.60
ISO 6194-5:2008 83.140.50 ISO/TC 131/SC 7
Rotary-shaft lip-type seals incorporating elastomeric sealing elements -- Part 5: Identification of visual imperfections 23.100.60
ISO 6195:2013 23.100.20 ISO/TC 131/SC 7
Fluid power systems and components -- Cylinder-rod wiper-ring housings in reciprocating applications -- Dimensions and tolerances
ISO 6263:2013 23.100.50 ISO/TC 131/SC 5
Hydraulic fluid power -- Compensated flow-control valves -- Mounting surfaces
ISO 6264:1998 23.100.50 ISO/TC 131/SC 5
Hydraulic fluid power -- Pressure-relief valves -- Mounting surfaces
ISO 6301-1:2009 23.100.99 ISO/TC 131/SC 5
Pneumatic fluid power -- Compressed-air lubricators -- Part 1: Main characteristics to be included in supplier's literature and product-marking requirements
ISO 6301-2:2006 23.100.99 ISO/TC 131/SC 5
Pneumatic fluid power -- Compressed-air lubricators -- Part 2: Test methods to determine the main characteristics to be included in supplier's literature
ISO 6358:1989 23.100.01 ISO/TC 131/SC 8
Pneumatic fluid power -- Components using compressible fluids -- Determination of flow-rate characteristics
ISO 6358-1:2013 23.100.01 ISO/TC 131/SC 5
Pneumatic fluid power -- Determination of flow-rate characteristics of components using compressible fluids -- Part 1: General rules and test methods for steady-state flow
ISO 6358-2:2013 23.100.01 ISO/TC 131/SC 5
Pneumatic fluid power -- Determination of flow-rate characteristics of components using compressible fluids -- Part 2: Alternative test methods
ISO 6403:1988 23.100.50

HIDROMAN
Customer Service

0232 479 15 50 [email protected]

All hydraulic components required for your machine are offered to you from a single address. With 20 years of experience in hydraulic system engineering, strong collaborations with the world's distinguished brands and following new technologies in the sector, we offer you perfect and competitive solutions.

We produce special solutions for you.

Our Hydraulic System Engineers produce package solutions for you. Hydraulic Components such as Hydraulic Hose, Bent Pipe with Union, Connection Element, Pipe Clamps, Hydraulic Filters, Line Type Valves that your machine needs are determined on-site by our Engineers and all equipment suitable for your needs are listed after the necessary system calculations and offered to you as a package solution.

Our customers choose Hidroman companies due to the creativity and efficiency of our employees. We are committed to diversity, innovations, technology, and we invest in skills through training and development.

We understand you very well with our machine manufacturing experience dating back to 1950.

OUR BRANDS

Hidroman

We manufacture in many areas under the roof of Hidroman. We manage each product group and production groups separately to increase our service quality. For more information: www.hidroman.com.tr

seide

As Seide Makina A.Ş., we establish Hydraulic Hose Production Lines with Fittings and Twisted Steel Drawn Pipe Production Lines with Fittings. For more information:

www.seidehydraulics.com

www.seidemachine.com

heben

As Heben Makina, we produce mobile construction equipment with hydraulic systems.

hidrolik market

As Hydraulic Market, we offer hydraulic equipment and services to our customers via the internet with our online sales platform in Türkiye. For more information: www.hidrolikmarket.com.tr

hydraulic store

As Hydraulic Store, we offer hydraulic equipment and services to our customers via the internet with our online sales platform abroad.

pnomatik market

As Pneumatic Market, we offer our customers pneumatic equipment and services over the internet with our online sales platform in Türkiye. For more information: www.pnomatikmarket.com

ata hidrolik

As Ata Hydraulic Cylinder, we manufacture hydraulic cylinders and perform hydraulic cylinder revisions.

Hidrolik Servis İzmir

As Hydraulic Service, we are not only there for you in case of Hydraulic System Failures and Sudden Stops, but also ensure that your hydraulic system machines operate with more efficiency with our predictive maintenance work. For more information: www.hidrolikservis.com.tr

Customer - Supplier - Employee Collaboration on Sustainability
Great marketing is a powerful tool for change. We work with the world's leading expert brands on social and environmental issues, creating work that addresses stereotypes, changes minds and encourages healthier and more sustainable consumer choices.

Our ethical standards
We aim to create a consistent culture across Hidroman companies and locations, helping our employees apply high standards and make the right decisions. Respect for human rights is a fundamental principle for Hidroman and we apply rigorous privacy and data security standards.

Hydraulic Engineering Solutions That Suit Your Needs
Meet Hydraulic Component Kits that suit your needs!

We work to speed up your manufacturing with Good Engineering solutions.

With our ready-made kits, we undertake your stock costs and assembly costs, so your valuable time is yours. We think and implement everything so that you can produce better machines.

ahmet ipek

Perfect Solutions with Our Transparent Approach
With our transparent manufacturing approach, we open the doors of every stage of our production to you. Don't waste your valuable time on hydraulic components, we work to offer you good engineering solutions. Let us do all your work on hydraulic components, focus on your work without wasting time on your machine's hydraulic system improvements.

Value Added Service
· Independent application consultancy and engineering

· Active support with the selection of suitable components considering technical and economic criteria

· Analysis and optimization of the current design and development of the new system

· On-site assembly training and hydraulic seminars

Fast Supply
Meet our flexible customer-oriented solution methods; we produce special solutions for you so that you do not have problems with supply.

Our Strengths - Your Advantages
· We make the necessary machinery and equipment investments on your behalf to increase your efficiency and performance.

· We produce extra values ​​by reducing the total cost.

We open branches for you, at your location, specifically for you and only to serve you.

Hidroman Makes a Difference with Its Customer-Focused After-Sales Service Approach!

Hidroman, which has a 20-year history in the Hydraulic System sector, offers an after-sales service approach focused on increasing customer satisfaction with maintenance contracts that aim to reduce the operating costs of its customers and increase efficiency.

Hidroman, the innovative brand of the Hydraulic Equipment sector, continues to make a difference with its after-sales services positioned in accordance with the needs of its customers as well as the services it offers before and after sales. Hidroman, which aims to provide uninterrupted and safe services to its customers with its operations throughout Turkey and Europe, defines a perfect customer experience as product reliability and after-sales service reliability.

Hidroman, which has made being with its customers throughout the life of the product in order to create brand loyalty a part of its corporate culture, organizes the services it offers within the scope of After-Sales Services under four main headings as supervision and assembly, commissioning, maintenance-repair and original spare parts supply. Supervision service; It covers consultancy and training services on issues such as efficient hydraulic equipment selection, rules to be considered for correct product installation and connection of the pump with other installation equipment. After the installation of the device, the commissioning service is also carried out by Hidroman’s expert technical staff.

In hydraulic equipment technologies used in many different areas, malfunctions may occur over time due to operating conditions. During the 10-year life of a piece of equipment, the initial investment cost and repair expenses constitute 10-15% of its total cost, while the remaining expenses are due to energy consumption. Hidroman examines all processes from the selection of the hydraulic system to all the equipment on which the hydraulic system will operate, and offers “efficient system solutions that aim to minimize energy consumption”.

In addition, with preventive and protective maintenance agreements, it aims to reduce the risk of failure of the device, extend its life and ensure that the device operates with high efficiency and low energy consumption.

Thanks to the advantages offered by Hidroman with preventive and protective maintenance services, the budget allocated by its customers for maintenance pays for itself in a short time.

In businesses where uninterrupted service is important, Hidroman intervenes in malfunctions in a short time and minimizes damages caused by labor losses. Offering its customers a 10-year original spare part guarantee in the hydraulic systems it sells, Hidroman delivers tested original spare parts from stock in case of malfunction, shortens malfunction periods and eliminates disruptions that may occur during this period.

Hidroman After-Sales Services department stated that they offer annual maintenance services in accordance with the needs of the business. It states that their aim with maintenance services is to increase hydraulic system efficiency, ensure continuous operation of the hydraulic system and to detect, monitor and prevent possible malfunctions in operating equipment and devices by using technological measurement, control, analysis and monitoring devices.

We aim to standardize the service provided by our authorized services by inspecting them at certain intervals. In addition, we follow the calibration processes of our technical equipment in line with quality certificates. We attach importance to communication channels to be established in order to increase customer satisfaction both in sales and service. We are at the service of our customers 24/7 with our competent services that can answer the questions of our customers who buy our products by trusting our brand. In order to measure the customer satisfaction rate, we organize surveys for our customers at certain intervals through our call center. As a result of the feedback we receive, we take action quickly to meet the expectations of our customers. The nature of the products and services in the market is changing rapidly with the effect of the digital transformation we are experiencing due to technological developments. For this reason, we see the development in our products and services as a constantly living process and we continue our improvement and development works without stopping.

Read More

Contact

Hidrolik Market Seide

Copyright © 2026 - Hidroman.com.tr | sitebizden | www.hidroman.com.tr