İçeriğe geç

Hidrolik ve Pnomatik Sistemler için İSO Standardları

Hidrolik ve Pnomatik Sistemler için İSO Standardları

Hidrolik ve Pnomatik Sistemler için İSO Standardları

andard and/or project ICS TC
ISO 1179-1:2013 23.100.40 ISO/TC 131/SC 4
Connections for general use and fluid power -- Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing -- Part 1: Threaded ports
ISO 1179-2:2013 23.100.40 ISO/TC 131/SC 4
Connections for general use and fluid power -- Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing -- Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)
ISO 1179-3:2007 23.100.40 ISO/TC 131/SC 4
Connections for general use and fluid power -- Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing -- Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H)
ISO 1179-4:2007 23.100.40 ISO/TC 131/SC 4
Connections for general use and fluid power -- Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing -- Part 4: Stud ends for general use only with metal-to-metal sealing (type B)
ISO 1219-1:2012 01.080.30 ISO/TC 131
Fluid power systems and components -- Graphical symbols and circuit diagrams -- Part 1: Graphical symbols for conventional use and data-processing applications 23.100.01
ISO 1219-2:2012 23.100.01 ISO/TC 131
Fluid power systems and components -- Graphical symbols and circuit diagrams -- Part 2: Circuit diagrams 01.080.30
ISO 2941:2009 23.100.60 ISO/TC 131/SC 6
Hydraulic fluid power -- Filter elements -- Verification of collapse/burst pressure rating
ISO 2942:2004 23.100.60 ISO/TC 131/SC 6
Hydraulic fluid power -- Filter elements -- Verification of fabrication integrity and determination of the first bubble point
ISO 2943:1998 23.100.60 ISO/TC 131/SC 6
Hydraulic fluid power -- Filter elements -- Verification of material compatibility with fluids
ISO 2944:2000 23.100.01 ISO/TC 131
Fluid power systems and components -- Nominal pressures
ISO 3019-1:2001 23.100.10 ISO/TC 131/SC 2
Hydraulic fluid power -- Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors -- Part 1: Inch series shown in metric units
ISO 3019-2:2001 23.100.10 ISO/TC 131/SC 2
Hydraulic fluid power -- Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors -- Part 2: Metric series
ISO 3019-2:2001/Cor 1:2006 23.100.10 ISO/TC 131/SC 2
ISO 3320:2013 23.100.20 ISO/TC 131/SC 3
Fluid power systems and components -- Cylinder bores and piston rod diameters and area ratios -- Metric series
ISO 3321:1975 23.100.20 ISO/TC 131/SC 3
Fluid power systems and components -- Cylinder bores and piston rod diameters -- Inch series
ISO 3601-1:2012 83.140.50 ISO/TC 131/SC 7
Fluid power systems -- O-rings -- Part 1: Inside diameters, cross-sections, tolerances and designation codes 23.100.60
ISO 3601-1:2012/Cor 1:2012 83.140.50 ISO/TC 131/SC 7
23.100.60
ISO 3601-2:2008 83.140.50 ISO/TC 131/SC 7
Fluid power systems -- O-rings -- Part 2: Housing dimensions for general applications 23.100.60
ISO 3601-3:2005 83.140.50 ISO/TC 131/SC 7
Fluid power systems -- O-rings -- Part 3: Quality acceptance criteria 23.100.60
ISO 3601-4:2008 83.140.50 ISO/TC 131/SC 7
Fluid power systems -- O-rings -- Part 4: Anti-extrusion rings (back-up rings) 23.100.60
ISO 3601-5:2002 23.100.60 ISO/TC 131/SC 7
Fluid power systems -- O-rings -- Part 5: Suitability of elastomeric materials for industrial applications 83.140.50
ISO 3662:1976 23.100.10 ISO/TC 131/SC 2
Hydraulic fluid power -- Pumps and motors -- Geometric displacements
ISO 3722:1976 23.100.99 ISO/TC 131/SC 6
Hydraulic fluid power -- Fluid sample containers -- Qualifying and controlling cleaning methods
ISO 3723:1976 23.100.60 ISO/TC 131/SC 6
Hydraulic fluid power -- Filter elements -- Method for end load test
ISO 3724:2007 23.100.60 ISO/TC 131/SC 6
Hydraulic fluid power -- Filter elements -- Determination of resistance to flow fatigue using particulate contaminant
ISO 3938:1986 23.100.60 ISO/TC 131/SC 6
Hydraulic fluid power -- Contamination analysis -- Method for reporting analysis data
ISO 3939:1977 23.100.99 ISO/TC 131/SC 7
Fluid power systems and components -- Multiple lip packing sets -- Methods for measuring stack heights 83.140.50
ISO 3968:2001 23.100.60 ISO/TC 131/SC 6
Hydraulic fluid power -- Filters -- Evaluation of differential pressure versus flow characteristics
ISO 3968:2001/Cor 1:2002 23.100.60 ISO/TC 131/SC 6
ISO 4021:1992 23.100.60 ISO/TC 131/SC 6
Hydraulic fluid power -- Particulate contamination analysis -- Extraction of fluid samples from lines of an operating system
ISO 4391:1983 23.100.10 ISO/TC 131/SC 2
Hydraulic fluid power -- Pumps, motors and integral transmissions -- Parameter definitions and letter symbols
ISO 4392-1:2002 23.100.10 ISO/TC 131/SC 8
Hydraulic fluid power -- Determination of characteristics of motors -- Part 1: At constant low speed and constant pressure
ISO 4392-2:2002 23.100.10 ISO/TC 131/SC 8
Hydraulic fluid power -- Determination of characteristics of motors -- Part 2: Startability
ISO 4392-3:1993 23.100.10 ISO/TC 131/SC 8
Hydraulic fluid power -- Determination of characteristics of motors -- Part 3: At constant flow and at constant torque
ISO 4393:1978 23.100.20 ISO/TC 131/SC 3
Fluid power systems and components -- Cylinders -- Basic series of piston strokes
ISO 4394-1:1980 23.100.20 ISO/TC 131/SC 3
Fluid power systems and components -- Cylinder barrels -- Part 1: Requirements for steel tubes with specially finished bores
ISO 4395:2009 23.100.20 ISO/TC 131/SC 3
Fluid power systems and components -- Cylinder piston rod end types and dimensions
ISO 4395:2009/Cor 1:2010 23.100.20 ISO/TC 131/SC 3
ISO 4397:2011 23.100.40 ISO/TC 131/SC 4
Fluid power connectors and associated components -- Nominal outside diameters of tubes and nominal hose sizes
ISO 4399:1995 23.100.40 ISO/TC 131/SC 4
Fluid power systems and components -- Connectors and associated components -- Nominal pressures
ISO 4400:1994 23.100.99 ISO/TC 131/SC 5
Fluid power systems and components -- Three-pin electrical plug connectors with earth contact -- Characteristics and requirements
ISO 4401:2005 23.100.50 ISO/TC 131/SC 5
Hydraulic fluid power -- Four-port directional control valves -- Mounting surfaces
ISO 4405:1991 23.100.60 ISO/TC 131/SC 6
Hydraulic fluid power -- Fluid contamination -- Determination of particulate contamination by the gravimetric method
ISO 4406:1999 75.120 ISO/TC 131/SC 6
Hydraulic fluid power -- Fluids -- Method for coding the level of contamination by solid particles 23.100.60
ISO 4407:2002 23.100.60 ISO/TC 131/SC 6
Hydraulic fluid power -- Fluid contamination -- Determination of particulate contamination by the counting method using an optical microscope
ISO 4409:2007 23.100.10 ISO/TC 131/SC 8
Hydraulic fluid power -- Positive-displacement pumps, motors and integral transmissions -- Methods of testing and presenting basic steady state performance
ISO 4411:2008 23.100.50 ISO/TC 131/SC 5
Hydraulic fluid power -- Valves -- Determination of pressure differential/flow characteristics
ISO 4412-1:1991 17.140.20 ISO/TC 131/SC 8
Hydraulic fluid power -- Test code for determination of airborne noise levels -- Part 1: Pumps 23.100.10
ISO 4412-2:1991 17.140.20 ISO/TC 131/SC 8
Hydraulic fluid power -- Test code for determination of airborne noise levels -- Part 2: Motors 23.100.10
ISO 4412-3:1991 23.100.10 ISO/TC 131/SC 8
Hydraulic fluid power -- Test code for determination of airborne noise levels -- Part 3: Pumps -- Method using a parallelepiped microphone array 17.140.20
ISO 4413:2010 23.100.01 ISO/TC 131/SC 9
Hydraulic fluid power -- General rules and safety requirements for systems and their components
ISO 4414:2010 23.100.01 ISO/TC 131/SC 9
Pneumatic fluid power -- General rules and safety requirements for systems and their components
ISO 5596:1999 23.100.99 ISO/TC 131
Hydraulic fluid power -- Gas-loaded accumulators with separator -- Ranges of pressures and volumes and characteristic quantities
ISO 5597:2010 23.100.20 ISO/TC 131/SC 7
Hydraulic fluid power -- Cylinders -- Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications
ISO 5598:2008 23.100.01 ISO/TC 131
Fluid power systems and components -- Vocabulary 01.040.23
ISO 5599-1:2001 23.100.50 ISO/TC 131/SC 5
Pneumatic fluid power -- Five-port directional control valves -- Part 1: Mounting interface surfaces without electrical connector
ISO 5599-1:2001/Cor 1:2007 23.100.50 ISO/TC 131/SC 5
ISO 5599-2:2001 23.100.50 ISO/TC 131/SC 5
Pneumatic fluid power -- Five-port directional control valves -- Part 2: Mounting interface surfaces with optional electrical connector
ISO 5599-2:2001/Amd 1:2004 23.100.50 ISO/TC 131/SC 5
ISO 5599-2:2001/Cor 1:2007 23.100.50 ISO/TC 131/SC 5
ISO 5781:2000 23.100.50 ISO/TC 131/SC 5
Hydraulic fluid power -- Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves -- Mounting surfaces
ISO 5782-1:1997 23.100.60 ISO/TC 131/SC 5
Pneumatic fluid power -- Compressed-air filters -- Part 1: Main characteristics to be included in suppliers' literature and product marking requirements
ISO 5782-2:1997 23.100.60 ISO/TC 131/SC 5
Pneumatic fluid power -- Compressed-air filters -- Part 2: Test methods to determine the main characteristics to be included in supplier's literature
ISO 5783:1995 23.100.50 ISO/TC 131/SC 5
Hydraulic fluid power -- Code for identification of valve mounting surfaces and cartridge valve cavities
ISO 5784-1:1988 01.080.30 ISO/TC 131/SC 5
Fluid power systems and components -- Fluid logic circuits -- Part 1: Symbols for binary logic and related functions 23.100.01
ISO 5784-2:1989 01.080.30 ISO/TC 131/SC 5
Fluid power systems and components -- Fluid logic circuits -- Part 2: Symbols for supply and exhausts as related to logic symbols 23.100.01
ISO 5784-3:1989 01.080.30 ISO/TC 131/SC 5
Fluid power systems and components -- Fluid logic circuits -- Part 3: Symbols for logic sequencers and related functions 23.100.01
ISO 6020-1:2007 23.100.20 ISO/TC 131/SC 3
Hydraulic fluid power -- Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series -- Part 1: Medium series
ISO 6020-2:2006 23.100.20 ISO/TC 131/SC 3
Hydraulic fluid power -- Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series -- Part 2: Compact series
ISO 6020-2:2006/Cor 1:2008 23.100.20 ISO/TC 131/SC 3
ISO 6020-3:1994 23.100.20 ISO/TC 131/SC 3
Hydraulic fluid power -- Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series -- Part 3: Compact series with bores from 250 mm to 500 mm
ISO 6022:2006 23.100.20 ISO/TC 131/SC 3
Hydraulic fluid power -- Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series
ISO 6099:2009 23.100.20 ISO/TC 131/SC 3
Fluid power systems and components -- Cylinders -- Identification code for mounting dimensions and mounting types
ISO 6149-1:2006 23.100.40 ISO/TC 131/SC 4
Connections for hydraulic fluid power and general use -- Ports and stud ends with ISO 261 metric threads and O-ring sealing -- Part 1: Ports with truncated housing for O-ring seal
ISO 6149-2:2006 23.100.40 ISO/TC 131/SC 4
Connections for hydraulic fluid power and general use -- Ports and stud ends with ISO 261 metric threads and O-ring sealing -- Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends
ISO 6149-3:2006 23.100.40 ISO/TC 131/SC 4
Connections for hydraulic fluid power and general use -- Ports and stud ends with ISO 261 metric threads and O-ring sealing -- Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends
ISO 6149-4:2006 23.100.40 ISO/TC 131/SC 4
Connections for fluid power and general use -- Ports and stud ends with ISO 261 metric threads and O-ring sealing -- Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
ISO 6150:1988 23.100.40 ISO/TC 131/SC 4
Pneumatic fluid power -- Cylindrical quick-action couplings for maximum working pressures of 10 bar, 16 bar and 25 bar (1 MPa, 1,6 Mpa, and 2,5 MPa) -- Plug connecting dimensions, specifications, application guidelines and testing
ISO 6162-1:2012 23.100.40 ISO/TC 131/SC 4
Hydraulic fluid power -- Flange connections with split or one-piece flange clamps and metric or inch screws -- Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
ISO 6162-2:2012 23.100.40 ISO/TC 131/SC 4
Hydraulic fluid power -- Flange connections with split or one-piece flange clamps and metric or inch screws -- Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76
ISO 6164:1994 23.100.40 ISO/TC 131/SC 4
Hydraulic fluid power -- Four-screw, one-piece square-flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar)
ISO 6194-1:2007 23.100.60 ISO/TC 131/SC 7
Rotary shaft lip-type seals incorporating elastomeric sealing elements -- Part 1: Nominal dimensions and tolerances 83.140.50
ISO 6194-2:2009 23.100.60 ISO/TC 131/SC 7
Rotary shaft lip-type seals incorporating elastomeric sealing elements -- Part 2: Vocabulary 83.140.50
  01.040.83
  01.040.23
ISO 6194-3:2009 83.140.50 ISO/TC 131/SC 7
Rotary shaft lip-type seals incorporating elastomeric sealing elements -- Part 3: Storage, handling and installation 23.100.60
ISO 6194-4:2009 83.140.50 ISO/TC 131/SC 7
Rotary shaft lip-type seals incorporating elastomeric sealing elements -- Part 4: Performance test procedures 23.100.60
ISO 6194-5:2008 83.140.50 ISO/TC 131/SC 7
Rotary-shaft lip-type seals incorporating elastomeric sealing elements -- Part 5: Identification of visual imperfections 23.100.60
ISO 6195:2013 23.100.20 ISO/TC 131/SC 7
Fluid power systems and components -- Cylinder-rod wiper-ring housings in reciprocating applications -- Dimensions and tolerances
ISO 6263:2013 23.100.50 ISO/TC 131/SC 5
Hydraulic fluid power -- Compensated flow-control valves -- Mounting surfaces
ISO 6264:1998 23.100.50 ISO/TC 131/SC 5
Hydraulic fluid power -- Pressure-relief valves -- Mounting surfaces
ISO 6301-1:2009 23.100.99 ISO/TC 131/SC 5
Pneumatic fluid power -- Compressed-air lubricators -- Part 1: Main characteristics to be included in supplier's literature and product-marking requirements
ISO 6301-2:2006 23.100.99 ISO/TC 131/SC 5
Pneumatic fluid power -- Compressed-air lubricators -- Part 2: Test methods to determine the main characteristics to be included in supplier's literature
ISO 6358:1989 23.100.01 ISO/TC 131/SC 8
Pneumatic fluid power -- Components using compressible fluids -- Determination of flow-rate characteristics
ISO 6358-1:2013 23.100.01 ISO/TC 131/SC 5
Pneumatic fluid power -- Determination of flow-rate characteristics of components using compressible fluids -- Part 1: General rules and test methods for steady-state flow
ISO 6358-2:2013 23.100.01 ISO/TC 131/SC 5
Pneumatic fluid power -- Determination of flow-rate characteristics of components using compressible fluids -- Part 2: Alternative test methods
ISO 6403:1988 23.100.50

Dosya İndir

HIDROMAN
Müşteri Hizmetleri

0 232 479 15 50 [email protected]