İçeriğe geç

Hydraulic Service and Maintenance with Hidroman: Golden Rules for Extending System Life

Hydraulic Service and Maintenance with Hidroman: Golden Rules for Extending System Life

Hydraulic Service and Maintenance with Hidroman: Golden Rules for Extending System Life

Hydraulic Service and Maintenance with Hidroman: Golden Rules for Extending System Life

Industrial hydraulic systems are at the heart of production thanks to their high power density, precise control and long-lasting operating principles. However, the biggest mistake made in hydraulic systems  is the "if it works, don't touch it"mentality. This approach;  It causes unplanned downtime, high repair costs and serious occupational safety risks.

Hidroman carries out hydraulic service and maintenance processes not only as troubleshooting; It  is considered as an engineering discipline that extends the life of the system, increases performance and ensures operational safety.

The Most Common Failures in Hydraulic Systems with Hidroman Experience

According to field data, approximately 80% of hydraulic system failures  are caused by hydraulic oil contamination. The most common problems faced by Hidroman service teams:

Cavitation

They are vacuum bubbles that occur as a result of the pump not being able to feed oil at sufficient flow rate.
The result: wear on pump internal surfaces, loud noise and premature failure.

Overheating

The high temperature reduces the viscosity of the oil, causing damage to the sealing elements.
Result: Internal leaks, loss of yield and chemical degradation of the oil.

Oil Contamination

Dust, water and metal particles; It causes snagging in valves, scratches in cylinders and a decrease in system performance.

Low Pressure Problems

It is usually caused by pump wear, relief valve misalignment or internal leaks.

 

How Does Hidroman Professional Hydraulic Service Process Work?

Hydraulic service in Hidroman; It is not a random part replacement, but an engineering process based on measurement, analysis and verification.

  1. Diagnostics and Diagnostic Measurements

Before disassembling the system:

  • Flow
  • Pressure
  • Pump efficiency rates

It is analyzed with professional measuring devices.

  1. Hidroman Oil Analysis and System Evaluation

Oil sample taken:

  • According to ISO 4406 particle class
  • Water ratio
  • Oxidation level

It is evaluated in terms of. If deemed necessary, the Hidroman flushing procedure is applied.

  1. Component Revision (Hidroman Standards)
  • Hydraulic pumps
  • Hydraulic motors
  • Hydraulic cylinders

It is revised in accordance with Hidroman technical standards.

Applied procedures:

  • Honing: Surface improvement of cylinder tubes
  • Sealing renewal: Use of high-quality Viton or NBR seal and O-ring suitable for operating temperature
  1. Testing, Calibration, and Approval

Each unit whose revision is completed:

  • At maximum working pressure
  • Sealing
  • Performance

tests. Any equipment that does not receive test approval is not sent to the site.

Why Preventive Maintenance with Hidroman?

Thanks to Hidroman preventive maintenance services:

  • Costs are reduced: Small interventions prevent major revisions.
  • Energy efficiency increases: Internal leaks are minimized.
  • Occupational safety is ensured: Hose bursts and sudden system downtime are prevented.

Hidroman Technical Note:
Hydraulic oil temperature should ideally  be kept in the range of 45°C – 55°C.Every +10°C above 65°C reduces oil life by half.

The Name of Trust in Hydraulic Service – Hidroman

The performance of hydraulic systems is  directly related to the right service partner.
Hidroman;

  • Advanced testing equipment
  • Use of high-quality spare parts
  • Experienced engineering staff

It offers long life, maximum efficiency and confidence for your hydraulic systems  .

Your Hydraulic System is Under Control with Hidroman

As Hidroman;

  • Hydraulic oil pollution analysis
  • System performance evaluation
  • Periodic maintenance planning

services.

Contact Hidroman to make a preliminary inspection appointment for your hydraulic system.