
Shell Tellus S2 V 46 Hydraulic Oil | Hidroman
Shell Tellus S2 V 46 Hydraulic Oil | High Viscosity Index Hydraulic Fluid – Hidroman
What Is Shell Tellus S2 V 46?
Shell Tellus S2 V 46 is a mineral-based, high viscosity index hydraulic oil developed for hydraulic systems operating across a wide range of temperatures. Classified as ISO VG 46, it is designed to help maintain viscosity performance as operating and ambient temperatures change.
The Shell Tellus S2 V range is intended for industrial hydraulic systems, mobile equipment and other hydraulic applications where an HV-type fluid is specified by the equipment manufacturer.
Hidroman's product listing identifies Shell Tellus S2 V 46 as a 20-liter hydraulic oil product.
Key Features of Shell Tellus S2 V 46
Shell Tellus S2 V 46 is designed for hydraulic applications where temperature-related viscosity changes need to be controlled.
Key product characteristics include:
ISO VG 46 viscosity grade
Mineral-based formulation
High viscosity index
Zinc-based anti-wear additive technology
Protection against wear in hydraulic pumps and components
Air release and foam control properties
Corrosion protection
Resistance to oxidation and sludge formation
Compatibility with common seal materials and paints used with mineral oils
Its high viscosity index helps reduce the effect of temperature changes on oil viscosity. This supports pumpability at lower temperatures and helps maintain suitable viscosity at higher operating temperatures.
Shell Tellus S2 V 46 Technical Specifications
The following figures are typical physical characteristics published in Shell product documentation. Typical values may vary slightly between production batches and current product specifications.
| Technical property | Typical value |
|---|---|
| Product name | Shell Tellus S2 V 46 |
| Former product name | Shell Tellus T 46 |
| Base oil type | Mineral |
| ISO viscosity grade | ISO VG 46 |
| ISO fluid type | HV |
| Kinematic viscosity at 40 °C | 46 mm²/s (cSt) |
| Kinematic viscosity at 100 °C | 7.9 mm²/s (cSt) |
| Kinematic viscosity at -20 °C | 2,350 mm²/s (cSt) |
| Viscosity index | 143 |
| Density at 15 °C | 872 kg/m³ |
| Flash point (COC) | 225 °C |
| Pour point | -36 °C |
Technical note: A kinematic viscosity of 46 cSt at 40 °C identifies the product as ISO VG 46. The viscosity index of 143 is an indicator of how the oil's viscosity changes with temperature.
The flash point and pour point should not be interpreted as the maximum and minimum operating temperatures of a hydraulic system. Actual operating limits must be determined using the equipment manufacturer's requirements and the latest Shell product data sheet.
Applications of Shell Tellus S2 V 46
Shell Tellus S2 V 46 can be considered for hydraulic systems operating under changing temperature conditions where an HV-type ISO VG 46 fluid is specified.
Industrial Hydraulic Systems
It can be used in hydraulic power systems for production lines, presses, machine tools and other industrial equipment, subject to the manufacturer's fluid requirements.
Mobile Hydraulic Equipment
It may be suitable for excavators, loaders and other mobile equipment exposed to changing outdoor temperatures when the equipment manufacturer specifies an HV-type ISO VG 46 hydraulic oil.
Mining and Heavy Industry
In applications involving heavy loads, extended operating hours and changing environmental conditions, the oil may be considered when its specifications meet the system requirements.
Hydraulic Systems Operating Across Wide Temperature Ranges
Its high viscosity index helps limit temperature-related viscosity changes, supporting hydraulic system performance under varying ambient and operating conditions.
Performance Benefits
Anti-Wear Protection
Shell Tellus S2 V 46 uses zinc-based anti-wear additive technology to help protect hydraulic pumps and system components against wear. This is particularly relevant in demanding conditions such as low-speed and high-load operation.
Viscosity Stability as Temperatures Change
The high viscosity index helps reduce the effect of temperature variations on oil viscosity. This supports consistent hydraulic performance in equipment operating under changing environmental conditions.
Resistance to Oxidation and Sludge Formation
The formulation is designed to resist oxidation-related degradation, acidic by-products and sludge formation at elevated operating temperatures. This helps support oil performance and system cleanliness.
Air Release and Foam Control
Air entrainment can negatively affect hydraulic system stability. The product's air release and foam control characteristics help support consistent hydraulic operation.
Corrosion Protection
The oil helps protect ferrous and non-ferrous metal components against corrosion, an important property in hydraulic systems containing different metal components.
Filterability
The formulation is designed to support filterability, including under certain conditions involving water and calcium. However, oil contamination, water content, filter selection and operating conditions should still be monitored.
Standards and Classifications
Shell product information identifies the following standards and classifications for the Tellus S2 V range:
ISO 11158 – HV hydraulic fluid category
ASTM D6158 – HV hydraulic fluid category
DIN 51524 Part 3 – HVLP-type hydraulic oil
Equipment manufacturer approvals and the applicable specifications for the exact viscosity grade should be verified using current Shell technical documentation.
Meeting an industry standard and holding an official approval from a specific equipment manufacturer are not necessarily the same thing.
Shell Tellus S2 V 46 and ISO VG 46: What Is the Difference?
ISO VG 46 is a viscosity grade based on the oil's kinematic viscosity at 40 °C. Oils in this grade have a nominal kinematic viscosity of 46 mm²/s at that temperature.
However, not all ISO VG 46 hydraulic oils have the same performance characteristics.
HM fluids are generally associated with anti-wear hydraulic oil performance.
HV fluids are designed with a higher viscosity index to provide more stable viscosity behavior as temperatures change.
Shell Tellus S2 V 46 is an ISO VG 46 hydraulic oil classified as an HV fluid. It should therefore be selected according to the system's required fluid category, not only its ISO VG viscosity grade.
How to Select the Right Hydraulic Oil
Correct hydraulic oil selection is important for equipment reliability and component service life.
The following factors should be considered:
Equipment manufacturer's recommendation: Check the required oil type and performance category.
Viscosity grade: Confirm whether ISO VG 46 is suitable for the system.
Fluid category: Determine whether the system requires HM, HV or another fluid type.
Operating temperature: Consider both ambient and actual oil temperatures.
Pump compatibility: Check the pump manufacturer's requirements regarding oil type and additive technology.
Seal and material compatibility: Consider the seals, coatings and materials used in the system.
Oil cleanliness: Monitor filtration performance and particle contamination.
Compatibility warning: Shell Tellus S2 V 46 uses zinc-based anti-wear additive technology. Although this technology provides protection for many hydraulic pumps, the product may not be suitable for certain older pumps with silver-plated components. In such cases, consult the pump manufacturer or Shell technical support before selecting the oil.
Different hydraulic fluid types should not be mixed without manufacturer approval and an appropriate conversion procedure.
Hydraulic Oil Cleanliness and Filtration
Using the correct hydraulic oil is not enough on its own. Oil cleanliness must also be maintained and monitored.
Particles in hydraulic oil can cause wear and performance loss in pumps, valves, hydraulic motors and other precision components. Water and other contaminants may also affect fluid properties.
Good hydraulic oil management includes:
Using suitable filter elements
Preventing contamination during oil transfer
Taking oil samples using appropriate procedures
Applying offline filtration and flushing when required
Following equipment manufacturer's recommendations for oil changes and maintenance
Hidroman also provides mobile filtration and flushing solutions to support hydraulic oil cleanliness and system maintenance.
Shell Tellus S2 V 46 Hydraulic Oil from Hidroman
Shell Tellus S2 V 46, listed in Hidroman's product portfolio, is a high viscosity index ISO VG 46 hydraulic oil for systems requiring an HV-type fluid.
Before selecting the product, confirm the equipment manufacturer's fluid specification, operating temperature, pump type and hydraulic system requirements.
Contact Hidroman for product availability, packaging and supply information.
Hidroman – Hydraulic systems, industrial oil management and engineering solutions.
Frequently Asked Questions
What viscosity grade is Shell Tellus S2 V 46?
It is an ISO VG 46 hydraulic oil with a typical kinematic viscosity of 46 mm²/s (cSt) at 40 °C.
Is Shell Tellus S2 V 46 a mineral oil?
Yes. It is a mineral-based, high viscosity index hydraulic oil using zinc-based anti-wear additive technology.
Is Shell Tellus S2 V 46 the same as Tellus T 46?
Hidroman's existing product information identifies Tellus T 46 as the former product name of Shell Tellus S2 V 46. Always refer to current Shell documentation for product and formulation updates.
What is the operating temperature range of Shell Tellus S2 V 46?
Its high viscosity index supports use across a wide range of temperatures. However, the pour point and flash point are not operating temperature limits. Actual operating conditions must be verified against the equipment manufacturer's requirements and current Shell technical data.
Can Shell Tellus S2 V 46 be used in every hydraulic pump?
No. The pump manufacturer's fluid requirements and compatibility specifications must be checked. The oil may not be suitable for certain older pumps containing silver-plated components.
What is the difference between Shell Tellus S2 V 46 and Shell Tellus S2 M 46?
Tellus S2 V belongs to the HV category and has a high viscosity index. Tellus S2 M belongs to the HM category. The correct choice depends on the hydraulic system's specified fluid performance requirements.
