
Custom Bent Hydraulic Steel Tubing | Hidroman
Fittings, Bent & Formed Steel Tubing
Custom Bent Hydraulic Steel Tubing for Hydraulic Systems
Hidroman manufactures custom bent and formed hydraulic steel tubing for hydraulic systems, mobile equipment, industrial machinery, OEM applications, and custom hydraulic assemblies.
Our bent hydraulic tubing is manufactured according to customer-specific dimensions, bending angles, routing requirements, and connection specifications. Tubes can be supplied with hydraulic fittings and formed into complex geometries to provide a clean, compact, and reliable hydraulic connection.
With tube diameters from 6 mm to 50 mm and bending radii including 1D, 1.5D, 2D, and 3D, Hidroman provides custom tubing solutions for applications where standard straight tubes or hydraulic hoses may not provide the required geometry.
Custom Hydraulic Tube Fabrication
Every hydraulic system has different routing requirements. Tight installation spaces, moving components, valve locations, manifolds, and machine frames can make standard tubing difficult to install.
Hidroman provides custom hydraulic tube fabrication based on technical drawings, measurements, existing samples, or 3D CAD data.
Depending on the application, tubing can be produced with:
- Custom tube lengths
- Specified bending angles
- 1D, 1.5D, 2D, and 3D bend radii
- Custom tube routing
- Hydraulic fittings
- Different connection configurations
- Customer-specific part numbers
- 3D CAD data
- OEM production requirements
This approach helps OEM manufacturers and hydraulic system integrators achieve consistent tube routing and repeatable production.
Bent Hydraulic Steel Tubing
Bent hydraulic steel tubing is commonly used where rigid hydraulic connections are preferred over flexible hose assemblies.
A properly designed bent tube can help reduce unnecessary adapters and connection points while providing a cleaner hydraulic installation.
Custom bent tubing is particularly useful for:
- Construction equipment
- Mining equipment
- Agricultural machinery
- Industrial machinery
- Hydraulic power units
- Hydraulic presses
- Mobile hydraulic systems
- OEM machinery
- Valve and manifold connections
- Hydraulic piping systems
- Heavy-duty equipment
For applications requiring repeatable geometry, custom tube bending provides a practical solution for both prototype and production requirements.
Formed Steel Tubing for OEM Applications
Hidroman manufactures formed steel tubing for OEM hydraulic applications, where consistent dimensions and repeatable geometry are important.
Tube geometry can be developed according to the machine design and installation requirements. This allows the finished tube assembly to follow the intended hydraulic routing and fit within the available installation space.
For OEM production, part numbers and production records can also be used to support repeat orders and product traceability.
Tube Bending Based on 3D CAD Drawings
Complex hydraulic tube routing can be difficult to define using only two-dimensional dimensions.
Hidroman can manufacture custom bent and formed tubing based on 3D CAD drawings and customer engineering data.
Using 3D design data can help define:
- Tube routing
- Bend locations
- Bend angles
- Connection positions
- Overall tube dimensions
- Installation clearances
- Fitting orientation
This is particularly valuable for OEM machinery and complex hydraulic systems where accurate tube geometry is essential.
Hydraulic Tube Sizes and Bend Radii
Hidroman offers custom bent steel tubing in a range of sizes to meet different hydraulic system requirements.
Available Tube Diameter Range
6 mm to 50 mm
Available Bend Radii
- 1D
- 1.5D
- 2D
- 3D
The appropriate tube diameter and bend radius depend on system pressure, flow requirements, installation space, tube material, and application conditions.
For a custom application, Hidroman can evaluate the technical requirements and manufacture the tubing according to the specified geometry.
Hydraulic Tube Fittings
Custom bent tubing can be supplied with suitable hydraulic tube fittings according to the customer's connection requirements.
Fitting selection can be based on:
- Port type
- Thread specification
- Tube size
- Pressure requirements
- Installation configuration
- Equipment manufacturer specifications
Providing the tube and fitting configuration as one assembly can simplify installation and help ensure that the finished tube matches the intended hydraulic connection points.
Traceable Hydraulic Tube Production
For OEM and industrial applications, repeatability and traceability are important.
Hidroman uses part numbering and production traceability for custom hydraulic tube applications. This helps identify specific tube configurations and supports repeat orders when the same component is required for ongoing production.
This approach is especially useful for machine manufacturers, hydraulic system integrators, and companies managing replacement components for existing equipment.
Protected Packaging for Hydraulic Tubing
Hydraulic tubing should be properly protected during transportation and storage.
Hidroman uses dedicated packaging methods for custom hydraulic tube products to help protect the finished components during shipment and handling.
Proper packaging is particularly important for precision-bent tubes and assemblies with hydraulic fittings, where damage or contamination can create problems during installation.
Why Choose Custom Bent Hydraulic Tubing?
Custom bent hydraulic tubing can provide several advantages over conventional straight tubing assemblies when the application requires a specific routing geometry.
Depending on the design, it can help:
- Optimize hydraulic tube routing
- Reduce unnecessary connection points
- Improve installation within confined spaces
- Provide consistent tube geometry
- Simplify OEM assembly
- Improve repeatability in production
- Create a cleaner machine installation
- Match existing machine designs
The final tube configuration should always be selected according to the hydraulic system's pressure, flow, temperature, material compatibility, vibration, and installation requirements.
Applications
Hidroman custom bent and formed steel tubing can be used in a wide range of hydraulic applications, including:
Construction Equipment
Hydraulic tubing for excavators, loaders, lifting equipment, and other heavy-duty machinery.
Mining Equipment
Rigid hydraulic tube assemblies for demanding mining and material-handling applications.
Agricultural Machinery
Custom hydraulic tubing for tractors, agricultural equipment, implements, and specialized machinery.
Industrial Hydraulic Systems
Bent tubing for presses, production machinery, hydraulic power units, and industrial automation systems.
OEM Machinery
Repeatable custom tubing production for original equipment manufacturers and machine builders.
Custom Hydraulic Tubing from Hidroman
Hidroman combines custom tube bending, hydraulic fittings, engineering support, and production traceability to provide complete hydraulic tubing solutions for OEM and industrial applications.
Whether you need a single custom tube, replacement tubing, or repeat production for an OEM machine, the tube can be developed according to your technical requirements.
Send your 2D drawing, 3D CAD model, dimensions, existing sample, or part number to Hidroman for a custom hydraulic tubing evaluation.
Frequently Asked Questions
What is bent hydraulic steel tubing?
Bent hydraulic steel tubing is rigid steel tubing formed to a specified geometry for use in hydraulic systems. It can be supplied with hydraulic fittings and manufactured according to the machine's required routing.
What tube sizes are available?
Hidroman manufactures custom bent tubing from approximately 6 mm to 50 mm in diameter, depending on the application and technical requirements.
What bend radii are available?
Common bending radii include 1D, 1.5D, 2D, and 3D. The appropriate radius depends on the tube size, material, application, and required geometry.
Can Hidroman manufacture tubing from a 3D CAD model?
Yes. Custom bent and formed hydraulic tubing can be developed using customer-provided 3D CAD data and technical drawings.
Can hydraulic fittings be installed on the tubing?
Yes. Custom bent tubing can be configured with suitable hydraulic fittings according to the required connection type and application.
Is custom OEM production available?
Yes. Hidroman provides custom hydraulic tube fabrication for OEM machinery and repeat production applications.
Can existing tubes be reproduced?
Existing tubes or samples can be used as a reference for developing a replacement or repeat-production tube, subject to technical evaluation.
Where are custom bent hydraulic tubes used?
They are commonly used in construction equipment, mining machinery, agricultural equipment, industrial hydraulic systems, hydraulic power units, presses, mobile equipment, and OEM machinery.
Get a Quote for Custom Hydraulic Tubing
Looking for custom bent hydraulic steel tubing for your machine or hydraulic system?
Send Hidroman your drawing, 3D CAD model, dimensions, sample, or part number. Our engineering team can review your requirements and provide a suitable hydraulic tube fabrication solution.
