İçeriğe geç

Oxygen Hose | Oxygen Acetylene Hose | Twin Welding Hose

Oxygen Hose | Oxygen Acetylene Hose | Twin Welding Hose

Oxygen Hose | Oxygen Acetylene Hose | Twin Welding Hose

Oxygen Hose

Oxygen and Acetylene Twin Welding Hose for Gas Welding Applications

An oxygen hose is a specialized gas hose designed to safely transfer oxygen in welding, cutting, brazing, and other oxy-fuel applications.

Hidroman's AUTOGEN-ZWILLING twin welding hose combines an oxygen hose and an acetylene hose in a single assembly. The blue hose is designed for oxygen, while the red hose is used for acetylene.

The product is specified according to EN ISO 3821, formerly known as EN 559, a standard used for rubber hoses for welding and related processes.

What Is an Oxygen Hose?

An oxygen hose is a flexible hose designed to transport pressurized oxygen gas from a gas source to welding, cutting, or other oxy-fuel equipment.

Oxygen service requires specially designed hose materials and compatible fittings. Hose selection should consider the gas type, working pressure, temperature, hose construction, connection method, and application environment.

For oxy-acetylene systems, using clearly identified gas lines is especially important. The twin-hose configuration provides separate oxygen and acetylene lines in one organized hose assembly.

AUTOGEN-ZWILLING Oxygen Acetylene Hose

The AUTOGEN-ZWILLING is a blue and red twin welding hose designed to supply oxygen and acetylene to gas welding and cutting equipment.

Key Features

  • Product type: Oxygen and acetylene twin hose
  • Application: Gas welding and oxy-fuel applications
  • Standard: EN ISO 3821, formerly EN 559
  • Blue hose: Oxygen
  • Red hose: Acetylene
  • Inner tube: Synthetic rubber
  • Reinforcement: Single textile braid
  • Outer cover: Synthetic rubber
  • Outer surface: Smooth
  • Working pressure: 20 bar / approximately 290 psi
  • Burst pressure: 60 bar / approximately 870 psi
  • Coil length: 50 m

Oxygen Hose Specifications

Specification Value
Product AUTOGEN-ZWILLING
Hose type Twin welding hose
Blue hose Oxygen
Red hose Acetylene
Standard EN ISO 3821 / EN 559
Inner tube Synthetic rubber
Reinforcement Single textile braid
Outer cover Synthetic rubber
Working pressure 20 bar / approx. 290 psi
Burst pressure 60 bar / approx. 870 psi
Coil length 50 m / approx. 164 ft
Blue hose size 6.0 x 5.0 mm
Red hose size 9.0 x 3.5 mm

The current Hidroman product specification lists the blue oxygen hose at 6.0 x 5.0 mm and the red acetylene hose at 9.0 x 3.5 mm.

Oxygen and Acetylene Hose Applications

Oxygen and acetylene hoses are commonly used in gas welding, cutting, brazing, and oxy-fuel equipment.

Typical applications include:

  • Oxy-acetylene welding
  • Gas welding equipment
  • Oxy-fuel cutting systems
  • Metal cutting
  • Brazing applications
  • Welding shops
  • Metal fabrication
  • Industrial maintenance
  • Repair workshops
  • Steel fabrication
  • Mobile welding equipment
  • Industrial gas equipment
  • Construction and maintenance operations

How to Select an Oxygen Hose

Selecting the correct oxygen hose is important for safe and reliable gas service.

Identify the Gas Type

First determine which gas the hose will carry.

For the AUTOGEN-ZWILLING configuration, the blue hose is for oxygen and the red hose is for acetylene.

Check the Working Pressure

The hose's working pressure must be suitable for the actual gas system.

The AUTOGEN-ZWILLING is specified with a 20 bar working pressure and 60 bar burst pressure.

Verify the Applicable Standard

For welding and oxy-fuel applications, the hose should comply with the applicable technical standard.

The AUTOGEN-ZWILLING is specified to EN ISO 3821, formerly EN 559.

Select Compatible Fittings

Fittings, connectors, regulators, and other components must be compatible with the gas being used and rated for the operating pressure.

Keep Gas Lines Properly Identified

Color identification is an important part of twin-hose configuration.

The blue and red hoses should remain connected to their correct gas sources and equipment throughout installation and operation.

Oxygen Hose Safety

Oxygen and acetylene systems require careful handling because they involve pressurized gases and, in many applications, flammable gases.

Inspect oxygen and welding hose assemblies regularly for:

  • Cuts
  • Cracks
  • Abrasion
  • Kinks
  • Bulges
  • Cover damage
  • Gas leakage
  • Heat damage
  • Damaged fittings
  • Excessive bending

Do not use a hose showing visible damage or suspected leakage.

Oxygen equipment should also be protected from contamination by oil, grease, and other combustible materials. Use only components specifically suitable for oxygen service.

Always follow the applicable equipment manufacturer's instructions, workplace safety requirements, and local regulations.

Advantages of Twin Oxygen Acetylene Hose

A twin welding hose combines the oxygen and acetylene lines into one organized hose assembly.

This configuration can:

  • Simplify hose handling
  • Keep gas lines organized
  • Make gas lines easy to visually identify
  • Reduce hose clutter around welding equipment
  • Improve operator convenience
  • Provide a practical connection between gas sources and welding equipment

Hidroman Oxygen Hose Solutions

Hidroman supplies industrial hose and connection solutions for demanding applications.

The AUTOGEN-ZWILLING is designed as an oxygen and acetylene twin welding hose, with a blue oxygen line and a red acetylene line for gas welding and oxy-fuel equipment.

When selecting an oxygen hose, the gas type, operating pressure, hose size, connection method, and application conditions should be evaluated together.

Request an Oxygen Hose Quote

Looking for an oxygen hose, oxygen acetylene hose, or twin welding hose?

Send us the following information:

  • Gas type
  • Hose size
  • Required hose length
  • Working pressure
  • Application
  • Fitting requirements
  • Required quantity

Hidroman can help you identify a suitable hose configuration for your welding, cutting, or industrial gas application.

Hidroman – Engineering-focused industrial hose solutions.


Specifications
Usage Area Oxygen applications Special Features Slippery Outer Surface Standard EN ISO 3821 (formerly EN 559) Inner layer synthetic rubber Reinforcement Coat single layer linen Weave Outer layer synthetic tire Color blue + red Fluids Blue: Oxygen gas Red: Acetylene gas
Product
Name ID x wall Unit Working pressure burst pressure Coil length only per spool (bar) (bar) (m)
AUTOGEN ZWILLING Red: 9.0 x 3.5; Blue: 6.0 x 5.0 Reel 20 60 50 ✔
Despite rigorous control, we cannot completely prevent errors and take no responsibility for the information available.