İçeriğe geç

Sandblasting Hose | Abrasive Blasting Hose | Hidroman

Sandblasting Hose | Abrasive Blasting Hose | Hidroman

Sandblasting Hose | Abrasive Blasting Hose | Hidroman

Sandblasting Hose

Heavy-Duty Sandblasting Hose for Abrasive Blasting Applications

A sandblasting hose is a heavy-duty industrial hose designed to safely transfer abrasive blasting media from a blasting machine to the blasting nozzle. Because abrasive materials continuously impact the hose liner at high velocity, high abrasion resistance is one of the most important factors in hose selection.

The Hidroman SANDSTRAHL sandblasting hose is designed for surface preparation, metal cleaning, stone cleaning, and other industrial applications involving highly abrasive materials.

The hose features a highly abrasion-resistant inner tube, tear-resistant synthetic textile reinforcement with copper braid, and a natural and synthetic rubber cover designed to resist abrasion, ozone, and weather conditions.

SANDSTRAHL Sandblasting Hose Features

  • Designed for abrasive blasting applications

  • Suitable for sand and other highly abrasive materials

  • Highly abrasion-resistant inner tube

  • Tear-resistant synthetic textile reinforcement

  • Copper braid reinforcement

  • Abrasion-resistant outer cover

  • Ozone and weather-resistant rubber cover

  • Embossed black outer surface

  • 175 psi working pressure

  • 522 psi burst pressure

  • -40°F to +158°F operating temperature

  • Inside diameters from 13 mm to 63 mm

  • Up to 40-meter spool lengths on selected models

  • Suitable for industrial surface preparation and cleaning applications

Sandblasting Hose Applications

SANDSTRAHL hose is designed for applications where abrasive media must be transferred through a flexible hose.

Typical applications include:

  • Sandblasting machines

  • Abrasive blasting systems

  • Metal surface preparation

  • Steel structure cleaning

  • Paint and coating removal

  • Rust removal

  • Shipyard and marine applications

  • Industrial maintenance

  • Stone and concrete surface cleaning

  • Equipment surface preparation

  • Construction and restoration projects

  • Transfer of highly abrasive materials

Why Use a Dedicated Sandblasting Hose?

Abrasive blasting places significantly higher wear demands on a hose than many conventional fluid-transfer applications.

During operation, abrasive particles continuously travel through the hose at high velocity. This creates friction and impact on the inner tube. A standard industrial hose may therefore experience accelerated internal wear when used for abrasive blasting.

A dedicated abrasive blasting hose uses a wear-resistant inner tube specifically designed for this type of service.

The correct hose inside diameter is also important. Selecting the proper diameter helps maintain efficient media flow and supports consistent blasting performance.

Technical Specifications

Model Inside Diameter Outside Diameter Working Pressure Burst Pressure Min. Bend Radius Spool
SANDSTRAHL 13-7 13 mm 27 mm 12 bar / 175 psi 36 bar / 522 psi 127 mm 40 m
SANDSTRAHL 19-7 19 mm 33 mm 12 bar / 175 psi 36 bar / 522 psi 190 mm 40 m
SANDSTRAHL 25-7 25 mm 39 mm 12 bar / 175 psi 36 bar / 522 psi 254 mm 40 m
SANDSTRAHL 32-8 32 mm 48 mm 12 bar / 175 psi 36 bar / 522 psi 320 mm 40 m
SANDSTRAHL 38-9 38 mm 56 mm 12 bar / 175 psi 36 bar / 522 psi 380 mm 40 m
SANDSTRAHL 51-11 51 mm 69 mm 12 bar / 175 psi 36 bar / 522 psi 510 mm —
SANDSTRAHL 63-9.5 63 mm 82 mm 12 bar / 175 psi 36 bar / 522 psi 635 mm —

The original product specification does not list a spool length for the 51 mm and 63 mm models, so no length has been assumed.

Sandblasting Hose Selection Guide

1. Choose the Correct Inside Diameter

The hose inside diameter affects abrasive media flow and overall blasting performance. The hose should be selected according to the blasting equipment, media flow requirements, and nozzle configuration.

2. Prioritize Abrasion Resistance

Abrasion resistance is critical for sandblasting hose applications. The internal liner must withstand continuous contact with abrasive media without excessive wear.

3. Check Working Pressure

Always select a hose with a working pressure suitable for the actual operating pressure of the blasting system.

The SANDSTRAHL series is rated at 12 bar / approximately 175 psi working pressure and 36 bar / approximately 522 psi burst pressure.

4. Follow the Minimum Bend Radius

The hose should not be bent below its specified minimum bend radius. Excessive bending can place unnecessary stress on the reinforcement and hose structure.

5. Consider the Working Environment

Sandblasting hoses are commonly exposed to demanding industrial environments. An abrasion-, ozone-, and weather-resistant outer cover helps protect the hose during regular operation.

Sandblasting Hose Safety

Proper inspection and handling are important for abrasive blasting hose safety.

  • Inspect the hose before operation.

  • Check the outer cover for deep cuts, cracks, or excessive wear.

  • Inspect couplings and connections regularly.

  • Do not exceed the rated working pressure.

  • Avoid sharp bends and twisting.

  • Do not drag the hose unnecessarily over sharp surfaces.

  • Maintain the specified minimum bend radius.

  • Replace damaged or excessively worn hoses.

  • Use compatible couplings and safety equipment for the blasting system.

Frequently Asked Questions

What is a sandblasting hose?

A sandblasting hose is a heavy-duty hose designed to transfer abrasive blasting media from a blasting machine to a blasting nozzle.

What is the working pressure of the SANDSTRAHL hose?

The SANDSTRAHL hose has a 12 bar / approximately 175 psi working pressure and a 36 bar / approximately 522 psi burst pressure.

What temperature range can the hose handle?

The specified operating temperature range is -40°C to +70°C, equivalent to approximately -40°F to +158°F.

What sizes are available?

The current SANDSTRAHL range includes 13, 19, 25, 32, 38, 51, and 63 mm inside diameters.

What is the difference between a sandblasting hose and a standard industrial hose?

A sandblasting hose is specifically designed with a highly abrasion-resistant inner tube to withstand the continuous impact and friction created by abrasive blasting media.

Where are sandblasting hoses used?

They are commonly used for metal cleaning, rust removal, coating removal, steel structure preparation, shipyard applications, industrial maintenance, and other abrasive blasting operations.

Hidroman Sandblasting Hose

Hidroman supplies industrial hose solutions for demanding applications where hose durability, proper sizing, and application compatibility are critical.

For abrasive blasting systems, selecting the correct sandblasting hose, inside diameter, pressure rating, bend radius, and connection configuration can help improve system reliability and hose service life.

Contact Hidroman for sandblasting hose selection and technical support.