
Hydraulic Valves: Types, Functions & Selection Guide | Hidroman
Hydraulic Valves: Types, Functions, Model Numbers, and How to Select the Right Valve
Hydraulic valves are essential components in industrial and mobile hydraulic systems. They regulate fluid flow, control operating pressure, manage actuator speed, and determine the direction of hydraulic oil throughout a circuit.
Selecting the right hydraulic valve is critical to achieving reliable machine operation, precise motion control, energy efficiency, and long service life.
Modern hydraulic systems use different types of valves, including directional control valves, check valves, pressure control valves, overcenter valves, flow control valves, and proportional hydraulic valves. Each valve performs a specific function depending on the system design and application requirements.
This technical guide explains the main types of hydraulic valves, their operating principles, ARGO-HYTOS product model numbers, technical specifications, and important selection criteria for industrial and mobile hydraulic applications.
1. What Is a Hydraulic Valve and How Does It Work?
A hydraulic valve is a mechanical or electrically controlled component that regulates the movement of hydraulic fluid within a hydraulic circuit.
Hydraulic valves control three fundamental operating parameters:
Flow direction: Determines where hydraulic oil travels within the circuit.
Operating pressure: Regulates and limits system pressure.
Flow rate: Controls actuator speed and hydraulic motor rotation.
Depending on the valve design, operation can be controlled manually, mechanically, hydraulically, or electrically through solenoid actuators and electronic control units.
Hydraulic valves are widely used in:
Construction and earthmoving equipment
Industrial machinery and hydraulic presses
Agricultural machinery
Material handling equipment
Mobile cranes and lifting systems
Mining equipment
Manufacturing and automation systems
2. Types of Hydraulic Valves
Hydraulic valves are classified according to their primary control function. The main categories include directional, check, pressure, overcenter, flow control, and proportional valves.
2.1. Directional Control Valves
Directional control valves determine the direction of hydraulic fluid flow. They control the extension and retraction of hydraulic cylinders and the rotational direction of hydraulic motors.
Depending on the application, directional valves can be operated through:
Manual levers
Mechanical actuators
Hydraulic pilot pressure
Pneumatic signals
Electrical solenoids
ARGO-HYTOS directional valve model numbers include:
| Model | Valve type |
|---|---|
| RPR3-06 | Manual directional control valve |
| RPK3-06 | Mechanically actuated directional valve |
| RPEK1-03 | Modular directional control valve |
| RPE3-06 | Solenoid-operated directional valve |
| SD2E-B4 | Screw-in cartridge directional valve |
| RPEL1-06 | Lightline directional control valve |
Directional control valves are commonly installed in hydraulic power units, mobile equipment, industrial machinery, and hydraulic cylinder control circuits.
2.2. Check Valves
Check valves allow hydraulic fluid to flow in one direction while preventing reverse flow.
They are used to maintain hydraulic pressure, prevent unwanted fluid movement, and protect specific sections of a hydraulic circuit.
Pilot-operated check valves provide additional control by allowing reverse flow when an external hydraulic pilot signal is applied.
ARGO-HYTOS examples:
| Model | Application |
|---|---|
| VJ3 | In-line check valve |
| 2RJV1-06 | Double pilot-operated check valve |
These valves are particularly useful in hydraulic lifting equipment, cylinder locking applications, and systems requiring load holding.
2.3. Pressure Control Valves
Pressure control valves regulate hydraulic pressure and help protect hydraulic components from excessive pressure.
Common pressure control valve types include:
Pressure relief valves
Pressure reducing valves
Reducing-relieving valves
Proportional pressure control valves
ARGO-HYTOS pressure control valve models:
| Model | Valve function |
|---|---|
| VPP2-06 | Direct-acting pressure relief valve |
| VPN1-06 | Pilot-operated pressure relief valve |
| SR1A-B2 | Pressure relief valve |
| SR4P2-B2 | Pilot-operated proportional pressure relief valve |
| SP2A-B3 | Direct-acting pressure reducing-relieving valve |
| SP4A-B3 | Pilot-operated pressure reducing-relieving valve |
A pressure relief valve protects a hydraulic circuit by directing excess fluid toward the tank when the pressure reaches its set opening value.
Pressure reducing valves serve a different purpose: they maintain a lower controlled pressure in a specific section of the hydraulic system.
Correct pressure valve selection is essential for system reliability, component protection, and operational safety.
2.4. Overcenter Valves (Load Control Valves)
Overcenter valves are designed to control loads that can drive an actuator due to gravity or an external force.
When lowering a heavy load, gravity can accelerate the hydraulic cylinder or motor beyond the desired operating speed. This condition is known as an overrunning or negative load condition.
An overcenter valve regulates the return flow and helps prevent uncontrolled actuator movement.
Typical applications include:
Mobile cranes
Hydraulic boom systems
Excavators and construction machinery
Hydraulic lifting platforms
Material handling equipment
Heavy-duty lifting systems
ARGO-HYTOS example model: SOP5A-BP3.
These valves can also help maintain actuator position when the system stops and provide protection against uncontrolled movement following certain hydraulic line failures.
2.5. Flow Control Valves
Flow control valves regulate hydraulic fluid flow to control the speed of cylinders and hydraulic motors.
A basic throttle valve changes the available flow area. However, actuator speed can vary when pump flow or external load conditions change.
Pressure-compensated flow control valves provide more stable flow regulation by maintaining a controlled pressure differential across the metering section.
ARGO-HYTOS offers different flow control solutions:
| Model | Function |
|---|---|
| SF22A-B2 | Two-way pressure-compensated flow control valve |
| SF32A-B3 | Three-way pressure-compensated flow control valve |
| SF32A-K3 | Cartridge flow control valve with three-way compensation |
| SFD2F-B4 | Flow divider and combiner valve |
Flow divider valves distribute pump flow between multiple actuators at a specified ratio, even when the actuators operate under different loads.
The general flow division accuracy indicated in the ARGO-HYTOS technical documentation is between 2% and 10%.
3. Proportional Hydraulic Valves
Proportional hydraulic valves provide continuous control of hydraulic flow or pressure according to an electrical command signal.
Unlike conventional on/off directional valves, proportional valves can regulate the controlled parameter across a range of operating values.
They are particularly important in applications requiring:
Precise cylinder movement
Adjustable operating speed
Remote pressure regulation
Smooth acceleration and deceleration
Automated machine control
Dynamic hydraulic system response
3.1. Proportional Directional Control Valves
Proportional directional valves regulate hydraulic flow and can control actuator movement speed. Versions equipped with two solenoids can also change flow direction.
ARGO-HYTOS proportional directional valve models include:
| Model | Description |
|---|---|
| PRM2-063 | Proportional directional control valve |
| PRMF2-063 | Proportional valve with inductive spool position sensor |
| PRM8-06 | Pilot-operated proportional directional valve |
| PRM9-06 | Digital proportional directional control valve |
| PRM9-10 | Digital proportional directional control valve |
| PRL1-06 | Linear motor-operated proportional valve |
| PRL2-06 | Linear motor-operated proportional valve with spool position feedback |
The PRM8-06 is a high-performance pilot-operated proportional directional valve with a maximum operating pressure of 350 bar (approximately 5,076 PSI) and a flow rate of up to 130 L/min (approximately 34.3 GPM).
The PRM9 series features hydraulic parameters optimized through mathematical and physical modeling, together with an intelligent electronic control unit supporting CAN bus communication.
The PRL series uses linear motor technology and is designed for applications requiring a fast response to changes in the command signal.
3.2. Proportional Pressure Control Valves
Proportional pressure valves allow pressure regulation through an electrical control signal.
They are used when the operating pressure must be adjusted remotely or continuously rather than through a fixed mechanical setting.
Important ARGO-HYTOS model numbers include:
| Model | Description |
|---|---|
| SR1P2-A2 | Direct-acting proportional pressure relief valve |
| SR4P2-B2 | Pilot-operated proportional pressure relief valve |
| SP4P2-B3 | Pilot-operated proportional reducing-relieving valve |
| SRN4P1-B2 | Inverted proportional pressure relief valve |
| SRN4P2-B2 | Inverted proportional pressure relief valve |
The SR4P2-B2 and SP4P2-B3 are designed for operating pressures up to 350 bar (approximately 5,076 PSI) and flow rates up to 60 L/min (approximately 15.9 GPM).
The proportional pressure valve range also includes inverted control characteristics. In these designs, increasing the control signal results in a reduction in controlled pressure.
3.3. Proportional Flow Control Valves
Proportional flow control valves continuously regulate the flow area through the valve.
The ARGO-HYTOS SF32P-C3 is a screw-in cartridge proportional flow control valve featuring a three-way pressure compensator. Its configuration can be modified to a two-way pressure compensator by closing the compensator outlet channel.
This type of valve is suitable for applications requiring electronically adjustable and stable hydraulic flow.
4. Hydraulic Valve Mounting and Connection Types
Valve installation and connection design are important factors in hydraulic system engineering.
ARGO-HYTOS hydraulic valves are available in different mounting configurations.
4.1. Subplate-Mounted Valves
These valves are installed on a mounting surface with hydraulic ports arranged on one connection face.
Their mounting interfaces are generally designed according to ISO 4401 standards.
This configuration is commonly used in industrial directional control valve assemblies.
4.2. Screw-In Cartridge Valves
Cartridge valves are installed inside specially machined cavities in hydraulic manifolds or modular blocks.
Their advantages include:
Compact hydraulic circuit design
Reduced external piping
Flexible manifold configurations
Integration of multiple hydraulic functions
Efficient use of installation space
Cartridge valves are widely used in mobile hydraulic equipment and custom hydraulic power units.
4.3. Modular Hydraulic Valves
Modular valves are assembled using plates with interconnected hydraulic passages.
Multiple valves can be combined into a compact hydraulic control assembly.
This configuration is especially useful in industrial hydraulic systems requiring several integrated control functions.
4.4. In-Line Hydraulic Valves
In-line valves feature threaded inlet and outlet connections and are installed directly into hydraulic lines.
They offer a practical solution for hydraulic circuits requiring direct connection to hoses, pipes, or manifolds.
5. Hydraulic Valve Pressure and Flow Capacity
Selecting a hydraulic valve requires evaluating both maximum operating pressure and flow capacity.
The ARGO-HYTOS technical documentation provides the following maximum pressure and flow values for its relevant directional valve groups:
| Valve size | Maximum pressure | Maximum flow |
|---|---|---|
| Size 04 | 320 bar / 4,641 PSI | 40 L/min / 10.6 GPM |
| Size 06 | 350 bar / 5,076 PSI | 80 L/min / 21.1 GPM |
| Size 10 | 350 bar / 5,076 PSI | 140 L/min / 37.0 GPM |
For the specified pilot-operated directional valve groups, the documented flow capacities are:
| Valve size | Maximum flow |
|---|---|
| Size 10 | 150 L/min / 39.6 GPM |
| Size 16 | 300 L/min / 79.3 GPM |
| Size 25 | 600 L/min / 158.5 GPM |
These values refer to the relevant valve groups described in the technical documentation. They should not be interpreted as universal ratings for every valve with the same nominal size.
Actual valve selection must also consider pressure drop, flow characteristics, operating temperature, duty cycle, and dynamic pressure peaks.
6. Hydraulic Fluid Cleanliness and Filtration Requirements
Hydraulic fluid cleanliness has a direct impact on valve performance and service life.
Contamination can cause spool sticking, increased internal leakage, unstable proportional control, and premature component wear.
ARGO-HYTOS specifies the following general fluid cleanliness recommendations according to ISO 4406:
| Operating condition | Recommended cleanliness |
|---|---|
| 160–210 bar operating pressure | ISO 4406 21/18/15 |
| 350 bar operating pressure | ISO 4406 19/16/13 |
| Proportional and pilot-operated valves | ISO 4406 19/16/13 |
For general hydraulic applications, the recommended filtration level is 8–12 microns at beta 200 (β=200).
For proportional valves, pilot-operated valves, poppet valves, and flow dividers, the recommended filter element fineness is between 5 and 12 microns at beta 200.
Maintaining the correct filtration level helps reduce:
Hydraulic valve contamination
Spool and poppet wear
Pilot passage blockage
Unstable pressure regulation
Premature valve failure
Unnecessary maintenance costs
Hydraulic oil analysis, effective filtration, and proper fluid handling should be considered essential parts of a hydraulic maintenance program.
7. Hydraulic Oil Temperature and Viscosity
Hydraulic fluid temperature affects valve response, lubrication, sealing performance, and overall system efficiency.
ARGO-HYTOS recommends maintaining the general operating fluid temperature between 40°C and 50°C (104°F–122°F).
The documented general kinematic viscosity range is 10–500 mm²/s, depending on valve construction and operating conditions.
The maximum fluid temperature also depends on seal material and whether the valve is solenoid-operated.
| Valve group | NBR seals | FPM (Viton) seals |
|---|---|---|
| Valves without solenoids | -30°C to +100°C | -20°C to +120°C |
| Valves with solenoids | -30°C to +80°C | -20°C to +80°C |
These are general product-group limits. The individual valve datasheet must always be checked before final selection.
High operating temperatures can accelerate fluid degradation, reduce viscosity, affect solenoid performance, and shorten seal life.
Hydraulic systems installed in enclosed machine compartments may require additional cooling capacity to maintain acceptable operating conditions.
8. PWM Control and Electronic Settings for Proportional Valves
Proportional hydraulic valves require suitable electronic control settings to achieve stable and accurate operation.
Modern proportional valves commonly use Pulse Width Modulation (PWM) signals and electronic control units.
ARGO-HYTOS proportional valve electronics are designed for 12 V DC or 24 V DC supply configurations, depending on the product.
The technical documentation identifies three main control configurations:
Open-loop control without feedback.
Internal feedback using a spool position sensor.
External feedback using a sensor measuring the controlled circuit parameter.
Recommended PWM Settings
The following table summarizes selected recommended starting settings from the ARGO-HYTOS technical documentation.
| Valve model | PWM frequency | Dither setting |
|---|---|---|
| PRM2-04 | 150 Hz | 1 kHz / 90 Hz |
| PRM2-06 | 150 Hz | 1 kHz / 90 Hz |
| PRM9-06 | 150 Hz | 1 kHz / 90 Hz |
| PRM9-10 | 150 Hz | 1 kHz / 90 Hz |
| PRM8-06 | 150 Hz | 1 kHz / 90 Hz |
| PRM8-10 | 150 Hz | 1 kHz / 80 Hz |
| PRL1 | 500 Hz | Not applicable |
| PRL2 | 500 Hz | Not applicable |
| SD2P-B4 | 200 Hz | 2 kHz / 200 Hz |
| SR1P2-A2 | 200 Hz | 2 kHz / 200 Hz |
| SR4P2-B2 | 250 Hz | 2 kHz / 200 Hz |
| SP4P2-B3 | 250 Hz | 2 kHz / 200 Hz |
These values are recommended starting settings rather than universal operating parameters.
Final PWM and Dither settings must be adjusted according to the dynamic behavior of the complete hydraulic application.
ARGO-HYTOS Electronic Control Units
The ARGO-HYTOS proportional valve range includes electronic control solutions such as:
EL7-I: Digital control electronics in connector form.
EL7-E: External electronic control unit for DIN rail mounting.
EL8: External digital electronic control unit.
The correct electronic control configuration must be matched to the selected valve, supply voltage, feedback arrangement, and application requirements.
9. ATEX and IECEx Hydraulic Valves for Hazardous Areas
Industrial applications involving flammable gases, vapors, or combustible dust require appropriate explosion-protection measures.
Standard solenoid-operated hydraulic valves may not be suitable for hazardous environments.
ARGO-HYTOS offers explosion-protected valve configurations with ATEX and IECEx certifications, together with certain regional certifications.
The technical documentation references applications in:
Mining operations
Oil and gas facilities
Chemical and petrochemical plants
Industrial environments containing flammable gases
Facilities with combustible dust
The documented explosion-protection classifications cover specific gas and dust environments under the applicable certification conditions.
For example, the documented 10 W coil configurations can be used in temperature classes T4, T5, and T6 when the specified operating limits are observed. The 18 W coil configurations are limited to T4 in the described product range.
The complete valve and solenoid configuration must be checked against the required hazardous-area classification. Certification of an individual component does not automatically certify the complete machine or hydraulic assembly.
10. Hydraulic Valve Installation and Maintenance
Correct installation is essential for reliable hydraulic valve operation.
Incorrect mounting, contamination, damaged sealing surfaces, and unsuitable electrical connections can lead to premature failure.
Important installation considerations include:
Mounting surfaces
ISO 4401 mounting interfaces and cartridge valve cavities must be manufactured according to the relevant dimensional specifications.
For cartridge valve installations, ARGO-HYTOS specifies:
Internal cavity surface roughness: Ra 1.6
Sealing surface roughness: Ra 0.8
Maximum specified roughness: Rmax 6.3
Surface flatness: 0.01 / 100 mm
Hydraulic cleanliness
All hydraulic connections must be protected against contamination during installation and maintenance.
Pressure safety
Never remove hydraulic components while the circuit is pressurized. Hydraulic pressure must be safely released before maintenance begins.
Electrical connections
Solenoid connections and electronic control units must be installed according to the manufacturer's wiring diagrams and electrical specifications.
Initial commissioning
During initial startup, operating pressure, oil temperature, valve response, and hydraulic leakage should be checked under controlled conditions.
Only trained and authorized personnel should install, commission, or maintain hydraulic equipment.
11. Hydraulic Valve Quality and Service Life
Hydraulic valve reliability depends on manufacturing precision, material quality, surface treatment, testing procedures, and operating conditions.
ARGO-HYTOS describes several quality assurance practices in its technical documentation:
Precision CNC machining
Heat treatment of critical valve components
Certified engineering materials
Computer-controlled functional testing
Corrosion resistance testing in accredited laboratories
Product certification for selected valve configurations
The manufacturer's general service-life figures, unless otherwise specified in the product catalog, are:
| Valve category | Documented service life |
|---|---|
| Solenoid-operated valves | 10 million cycles |
| Manually operated hand-lever valves | 1 million cycles |
| Other mechanically operated valves | 10 million cycles |
These are manufacturer-stated design service-life figures and should not be interpreted as guaranteed field operating life. Actual service life depends on pressure, contamination, operating frequency, temperature, installation, and maintenance.
12. How to Select the Right Hydraulic Valve
Choosing the right hydraulic valve requires a complete understanding of the hydraulic circuit and its operating requirements.
Before selecting a valve, evaluate the following parameters:
| Selection parameter | What to evaluate |
|---|---|
| Operating pressure | Continuous and maximum pressure |
| Flow rate | Nominal and maximum flow requirements |
| Valve function | Directional, pressure, flow, or load control |
| Actuation | Manual, mechanical, hydraulic, or solenoid |
| Connection type | ISO 4401, CETOP, UNF, or metric |
| Fluid compatibility | Hydraulic oil type and seal compatibility |
| Operating temperature | Fluid and ambient temperatures |
| Cleanliness | ISO 4406 contamination level |
| Electrical requirements | Supply voltage and control signal |
| Installation | Subplate, cartridge, modular, or in-line |
For OEM machine manufacturers, valve selection should also consider machine duty cycles, operating loads, control response, and long-term maintenance requirements.
A properly selected hydraulic valve helps improve system stability, reduce unnecessary energy losses, and support reliable machine operation.
13. Hydraulic Valve and System Engineering Solutions by Hidroman
Selecting the correct hydraulic valve is only one part of designing a reliable hydraulic system. The complete circuit must be engineered to ensure that pumps, valves, cylinders, filtration equipment, and electronic controls operate together effectively.
Hidroman provides engineering and manufacturing solutions for industrial and mobile hydraulic applications.
Depending on project requirements, solutions include:
Hydraulic valve selection and system integration
Proportional valve and electrohydraulic control applications
Custom hydraulic manifolds and valve blocks
Hydraulic power unit design and manufacturing
Hydraulic circuit engineering
Hydraulic filtration and oil cleanliness solutions
Hydraulic system performance improvement
Testing, installation, and commissioning
Hidroman's engineering approach focuses on developing application-specific hydraulic solutions rather than treating individual components as isolated products.
For technical assistance with hydraulic valve selection, custom hydraulic systems, or OEM hydraulic projects, contact Hidroman.
14. Frequently Asked Questions About Hydraulic Valves
What are the main types of hydraulic valves?
The main types are directional control valves, check valves, pressure control valves, overcenter valves, flow control valves, and proportional hydraulic valves.
What does a hydraulic directional control valve do?
A directional control valve determines the path of hydraulic fluid within a circuit. It controls the direction of hydraulic cylinder movement and hydraulic motor rotation.
What is the difference between a proportional valve and a standard hydraulic valve?
A standard directional valve typically switches between defined operating positions. A proportional valve provides adjustable flow or pressure control according to an electrical command signal.
What is a cartridge hydraulic valve?
A cartridge valve is a compact hydraulic component installed in a specially machined cavity within a manifold or hydraulic block. It allows multiple hydraulic functions to be integrated into a compact assembly.
Why is hydraulic oil cleanliness important for proportional valves?
Proportional valves contain precision components that are sensitive to contamination. Particles can interfere with spool movement, affect control accuracy, and increase mechanical wear.
What is ISO 4406 in hydraulic systems?
ISO 4406 is an international standard used to classify the level of particulate contamination in hydraulic fluids. It helps determine the required fluid cleanliness for hydraulic components and systems.
What is an overcenter valve used for?
An overcenter valve controls overrunning loads and helps prevent uncontrolled movement during lowering operations. It is commonly used in cranes, lifting equipment, and mobile hydraulic machinery.
What is PWM control in hydraulic valves?
Pulse Width Modulation is an electrical control method used to regulate solenoid operation in proportional valves. Appropriate PWM and Dither settings help achieve stable valve response.
How do I select the correct hydraulic valve?
The selection process should consider operating pressure, flow rate, valve function, mounting configuration, electrical requirements, fluid compatibility, temperature, and system cleanliness.
What causes hydraulic valves to fail?
Common causes include fluid contamination, incorrect installation, excessive pressure, unsuitable operating temperature, mechanical wear, and incorrect electrical control settings.
Related Articles You May Also Be Interested In
Hydraulic System Design & Engineering Services – Hydraulic system engineering and component selection.
Hydraulic Filtration Systems & Hydraulic Filters – Hydraulic oil cleanliness and filtration technology.
What Is a Hydraulic System? How It Works – Hydraulic components and operating principles.
