Hydraulic Hose Crimping Machine
Hydraulic Hose Crimping Machine
Hydraulic Hose Crimping Machine
With the domestically manufactured Hydraulic Hose Press, you can do your hydraulic hose pressing works quickly and at affordable costs. Contact us for our rich hydraulic hose press options.
SEIDE S51 HYDRAULIC HOSE TIGHTENING MACHINE USER INSTRUCTIONS
Hydraulic Hose Press
AIM:
Working safely and error-free on the hose union pressing bench.
RESPONSIBLE:
Production Staff.
SCOPE:
Pressing the fitting on hydraulic hoses.
APPLICATION:
PARTS OF THE MACHINE
The main body on which the molds are attached
Control Board
Pressing Diameter Adjustment Micrometer
Electrical Connection Switch (used to cut and open the electrical current to the machine)
Pressure indicator
Hydraulic Oil Tank
CONTROL BOARD
-
CRİMP : Hose Pressing Button
OPEN: Mold Open Button
AUTO/MANUEL: Manual Control- Automatic Control Button
ENGINE START: Machine Start Button
STOP: Emergency Stop
Machine Opening Distance Setting
MOLD SELECTIONOnly use original molds on the machine
Choose the die as close as possible to the clamping size.
The clamping range of the dies is as follows.
Take these dimensions into account when choosing patterns.D
TIGHTENING RANGE
15
15……18mm
18
18……21mm
21
21……24mm
24
24……27mm
27
27……33mm
33
33……39mm
39
39……45mm
45
45……51mm
51
51……57mm
57
57……66mm
66
66……75mm
MOLD REPLACEMENT
After the mold to be used is selected, the spring pins are pulled with the mold changing apparatus and the molds are set in place one by one. The molds are removed by pulling the spring pins with the help of the apparatus in the same way as the disassembly process.
MICROMETER SETTING
According to the diameter size to be pressed, micrometer adjustment is made with the help of the table below. Micrometer 0 Setting: 10.7mm.
Important Note: The hose pressing dimensions given are valid for the hose+coupling+sockets purchased from Hidroman. If a different material is used, the pressing dimensions will change.