İçeriğe geç

Hydraulic Accumulators | Bladder & Diaphragm | Hidroman

Hydraulic Accumulators | Bladder & Diaphragm | Hidroman

Hydraulic Accumulators | Bladder & Diaphragm | Hidroman

Hydraulic Accumulators – Bladder and Diaphragm Accumulators | Hidroman

Hydraulic accumulators are pressure vessels used in hydraulic systems to store energy, compensate for fluid volume changes, and help reduce pressure fluctuations, pulsations, and hydraulic shock. When correctly selected and integrated into a system, an accumulator can support system stability, reduce pump demand peaks, and provide stored hydraulic energy when required.

Hidroman offers HK BLAK bladder and diaphragm hydraulic accumulator models in different nominal gas volumes and pressure ratings. Selecting the right accumulator requires evaluating the application, minimum and maximum system pressure, required fluid volume, nitrogen pre-charge pressure, temperature, flow rate, and installation requirements.

What Is a Hydraulic Accumulator?

A hydraulic accumulator is a pressure vessel that stores hydraulic energy for later use. In common designs, hydraulic fluid is separated from a compressible gas—typically nitrogen—by a bladder, diaphragm, or piston.

When hydraulic fluid enters the accumulator, the gas compresses and stores energy. When system demand increases or pressure falls, the compressed gas helps return fluid to the hydraulic circuit.

Depending on the design and operating conditions, accumulators can support energy storage, pressure stabilization, shock absorption, pulsation dampening, and fluid volume compensation.

Common Applications of Hydraulic Accumulators

Hydraulic accumulators are used in a range of industrial and mobile hydraulic systems:

  • Energy storage: Provides additional stored hydraulic energy when needed.

  • Volume compensation: Helps accommodate changes in fluid volume or system operating conditions.

  • Leakage compensation: Can compensate for small fluid losses in appropriately designed circuits.

  • Pressure stabilization: Helps reduce pressure fluctuations under specified operating conditions.

  • Thermal expansion compensation: Accommodates fluid volume changes caused by temperature variations.

  • Pump pulsation dampening: Helps reduce flow and pressure pulsations generated by pumps.

  • Hydraulic shock absorption: Reduces the effects of sudden pressure changes.

  • Noise and vibration control: Helps reduce noise and vibration in suitable system designs.

  • Fluid separation: In designs intended for this purpose, separates different fluids and prevents direct mixing.

The accumulator type, size, and pre-charge pressure must be selected for the specific application. Not every accumulator is suitable for every function.

HK BLAK Bladder and Diaphragm Hydraulic Accumulators

Hidroman's HK BLAK product page lists hydraulic accumulator models with different nominal gas volumes, dimensions, and pressure ratings.

Key product characteristics

  • Maximum working pressure: Up to 350 bar, depending on the model.

  • Standard bladder material: NBR.

  • Standard temperature range: -15°C to +80°C (5°F to 176°F).

  • Preferred mounting position: Vertical, with the gas side at the top.

  • Gas charging: The product page states that accumulators are supplied without gas pre-charge. Nitrogen charging can be arranged separately upon request.

  • CE marking: The page identifies CE marking for bladder accumulators.

  • Service parts: The HK BLAK REPKIT repair kit is listed as a related replacement part.

Important: The 350-bar rating does not apply automatically to every model. The product page lists 330-bar ratings for certain larger-volume versions. Always confirm the pressure rating of the exact model selected.

HK BLAK Hydraulic Accumulator Models

The following nominal gas-volume options are listed on Hidroman's product page:

Model / nominal gas volumeListed maximum pressure
HK BLAK 1.0 L350 bar
HK BLAK 2.5 L350 bar
HK BLAK 4.0 L350 bar
HK BLAK 5.0 L350 bar
HK BLAK 6.0 L350 bar
HK BLAK 10.0 L350 bar
HK BLAK 10.0 L, K2 option330 bar
HK BLAK 20.0 L330 bar
HK BLAK 32.0 L330 bar
HK BLAK 50.0 L330 bar

Connection dimensions, overall length, diameter, and mounting requirements vary by model. Review the product dimensions and the technical drawing for the exact model before ordering.

How to Select the Right Hydraulic Accumulator

Selecting a hydraulic accumulator requires more than matching nominal gas volume or maximum pressure. The following parameters should be considered together:

  1. Application: Energy storage, shock absorption, pulsation dampening, or volume compensation.

  2. Minimum and maximum system pressure: Determines the required operating pressure range.

  3. Required fluid volume: Affects the usable volume the accumulator must deliver.

  4. Nitrogen pre-charge pressure: Must be determined for the application and operating pressure range.

  5. Operating temperature: Temperature affects gas pressure and elastomer performance.

  6. Fluid and material compatibility: The bladder or diaphragm material must be compatible with the hydraulic fluid.

  7. Flow rate and pressure ratio: Influence accumulator type and sizing.

  8. Installation space and connections: Consider dimensions, connection type, mounting, and service access.

Do not set pre-charge pressure using a generic formula without checking the accumulator type and system requirements. Follow the manufacturer's technical instructions for the specific model and application.

Hydraulic Accumulator Accessories and Replacement Parts

Hidroman lists the following accessories and service parts for the HK BLAK accumulator range:

  • HK CD: Hydraulic accumulator stand.

  • HK AS: Tank adapter for a safety and shut-off block.

  • HK KONS: Bracket for a bladder accumulator.

  • HK SAB M: Safety and shut-off block with manual drain.

  • HK CE: Tank collar.

  • HK ADA S: Tank adapter for a safety and shut-off block.

  • HK BLAK REPKIT: Hydraulic accumulator repair kit.

Confirm accessory compatibility against the accumulator model, connection dimensions, and system design before ordering.

Hydraulic Accumulator Safety and Maintenance

Hydraulic accumulators are pressure vessels and must be handled with care. Incorrect pre-charge pressure, improper installation, or servicing before pressure has been safely released can create serious hazards.

  • Isolate the equipment and safely depressurize the hydraulic system according to the manufacturer's instructions before maintenance.

  • Use only the gas specified by the manufacturer; nitrogen charging is identified for this product range.

  • Check pre-charge pressure with suitable equipment and according to the prescribed procedure.

  • Inspect the bladder or diaphragm, connections, and housing regularly.

  • Never exceed the accumulator's rated pressure or temperature limits.

  • Have charging and repair work performed by personnel with appropriate training and equipment.

Frequently Asked Questions

What does a hydraulic accumulator do?

It stores hydraulic energy and, depending on the application, helps reduce pressure fluctuations, hydraulic shock, and pulsations or provides fluid volume compensation.

What is the difference between bladder and diaphragm accumulators?

Both designs separate gas from hydraulic fluid, but they differ in internal construction, usable volume, pressure-ratio limits, response characteristics, and application suitability. Selection should be based on the system requirements.

What is the maximum pressure of an HK BLAK hydraulic accumulator?

Hidroman lists models rated up to 350 bar, while certain 10 L and larger versions are listed at 330 bar. Verify the rating of the exact model.

What is the temperature range of HK BLAK accumulators?

The product page lists -15°C to +80°C (5°F to 176°F) for the standard model. Confirm material and application suitability for the intended operating conditions.

Which gas is used to charge a hydraulic accumulator?

Nitrogen is commonly used in hydraulic accumulators. Pre-charging must follow the manufacturer's procedure and the requirements of the specific model.

How do you select a hydraulic accumulator?

Evaluate the application, minimum and maximum system pressure, required fluid volume, pre-charge pressure, temperature, flow rate, fluid compatibility, and installation dimensions.

Hydraulic Accumulator Solutions from Hidroman

Explore hydraulic accumulators, mounting accessories, and related hydraulic components through Hidroman. For a suitable selection, assess the operating conditions and technical requirements of your application.

You May Also Be Interested In