
Flange-Mounted Twin Load Holding Valve | Hidroman
Flange-Mounted Twin Load Holding Valve for Hydraulic Cylinders – OCVFM Series
Controlling hydraulic loads and limiting unintended cylinder movement are important considerations in mobile and industrial hydraulic systems. The Hidroman OCVFM Series flange-mounted twin load holding valve is designed for applications requiring load control on both working lines of a hydraulic cylinder.
Mounted directly to the cylinder through a flange connection, the valve helps reduce the risk of uncontrolled movement following damage to a hose or pipe connection. Its internally piloted design can eliminate the need for a separate external pilot line in compatible hydraulic circuits.
The OCVFM Series is intended for use in mobile hydraulic equipment and industrial machinery. Correct valve selection depends on the cylinder configuration, operating pressure, flow rate, load characteristics, and mounting interface.
Key Features of the OCVFM Series
Twin load holding function: Supports load control on both the extension and retraction sides of a cylinder.
Direct cylinder flange mounting: Allows the valve to be mounted directly onto a compatible cylinder interface.
Internal pilot control: Can eliminate the need for an external pilot line in suitable circuit designs.
Support against hose or pipe failure: Helps reduce the risk of uncontrolled movement if a hydraulic line is damaged.
Aluminum body: The published product page identifies aluminum as the body material.
Nitrile O-ring seals: Uses NBR sealing elements.
Multiple thread options: BSP as standard, with NPT and metric options available upon request.
Wide application range: Designed for general hydraulic applications, including mobile and industrial systems.
A load holding valve does not guarantee protection against every possible failure. Safety depends on correct valve selection, installation, hydraulic circuit design, and any additional safeguards required by the application.
Technical Specifications
Feature | Specification |
|---|---|
Series | OCVFM |
Product type | Twin load holding valve |
Design | Open center, twin configuration |
Mounting | Direct flange mounting on the cylinder |
Pilot control | Internally piloted |
Body material | Aluminum |
Standard thread | BSP |
Optional threads | NPT, metric |
Sealing | Nitrile O-ring (NBR) |
Operating temperature | -30°C to +110°C |
Heat treatment | Internal components |
Application | General hydraulic systems |
Technical note: Maximum operating pressure, rated flow, pilot ratio, and flange dimensions are not specified in the available product description. Confirm these parameters against the technical documentation for the exact model before ordering.
What Is a Twin Load Holding Valve?
A twin load holding valve is a hydraulic valve arrangement designed to help control a load on both working lines of a double-acting hydraulic cylinder. In a properly designed circuit, it helps resist unintended movement caused by the load and supports controlled cylinder operation.
The twin configuration provides load control in both directions. Actual valve behavior depends on pilot connections, pressure differentials, load characteristics, and the other components in the hydraulic circuit.
Benefits of Direct Cylinder Flange Mounting
Mounting a valve directly to the cylinder places the load control component close to the actuator. Depending on the hydraulic design, this arrangement can reduce the length of the connection between the valve and cylinder and help limit the risk of loss of control caused by line failure.
Potential benefits include:
Compact hydraulic system layouts.
Direct connection to a compatible cylinder.
Space-efficient installation on mobile machinery.
Load control for both directions of cylinder movement.
Simplified plumbing in suitable internally piloted circuits.
The actual benefits depend on the cylinder interface, flange geometry, and hydraulic circuit design.
Applications of Twin Load Holding Valves
Mobile construction equipment
Can be considered for excavators, loaders, and other mobile hydraulic machinery where controlled cylinder movement is required.
Lifting and positioning systems
Supports hydraulic applications that require a load to be held in position and cylinder movement to be controlled.
Agricultural machinery
Can help control loads on cylinder-operated equipment when selected for the system's operating conditions.
Industrial machinery
Provides a load control function in machines and automation systems using compatible double-acting cylinders.
Custom machinery and OEM projects
Can be evaluated for hydraulic systems requiring direct valve mounting on a cylinder.
How to Select the Right OCVFM Load Holding Valve
Evaluate the following parameters before selecting a valve:
Cylinder type: Double-acting operation and cylinder connection geometry.
Maximum operating pressure: Normal system pressure and potential pressure peaks.
Required flow rate: Oil flow needed to achieve the desired cylinder speed.
Load characteristics: Load direction, weight, and effects during movement.
Flange dimensions: Cylinder mounting face and port configuration.
Pilot operation: Compatibility of the internal pilot arrangement with the hydraulic circuit.
Fluid and temperature: Hydraulic fluid properties and operating temperature.
Thread and connection type: BSP, NPT, or metric requirements.
Seal compatibility: Suitability of NBR seals for the fluid and temperature conditions.
Connection size alone is not enough to determine suitability. Pressure rating, flow, load characteristics, and pilot behavior must also be verified.
Hydraulic Load Control and Safe Operation
Correct valve selection, installation, and commissioning are essential for safe operation.
Verify the valve's pressure and flow limits in the technical documentation.
Confirm flange-face compatibility and the correct fastening arrangement.
Ensure hoses, pipes, and fittings are rated for the system pressure.
Safely depressurize the system before installation or maintenance.
Apply the required mechanical safeguards to equipment carrying a load.
Test cylinder movement under controlled conditions during commissioning.
A load holding valve does not replace mechanical supports or other machine safety systems where these are required.
Request a Quote for the Hidroman OCVFM Series
The Hidroman OCVFM Series flange-mounted twin load holding valve is designed for hydraulic systems requiring controlled load holding and cylinder movement on both working lines.
To help identify the appropriate configuration, provide the cylinder model, flange dimensions, operating pressure, flow rate, connection type, and application details.
Contact Hidroman for technical selection support and a quotation for the OCVFM Series twin load holding valve.
Related pages:
