İçeriğe geç

Exitflex Spray Tips – Quick & Right Selection Guide | Technical Airless Nozzle Selection

Exitflex Spray Tips – Quick & Right Selection Guide | Technical Airless Nozzle Selection

Exitflex Spray Tips – Quick & Right Selection Guide | Technical Airless Nozzle Selection

Exitflex Spray Tips – Quick & Right Selection Guide | Technical Airless Nozzle Selection

What is Exitflex? Technical Highlights

Exitflex produces airless and air-assisted spray tips with 40+ years of industrial spray engineering experience. The products are treated with high-quality tungsten carbide material, ensuring superior performance in professional paint/coating applications.

Production with Swiss engineering

Wide range of types & sizes

Airless and air-assisted options

Structure compatible with almost all airless systems

What is Spray Tip and Why is it Important?

The spray tip is the critical part that controls the fan angle, flow volume and surface finish of the liquid in airless paint systems. Choosing the right type:

Optimizes paint consumption

Improves surface quality

Incorrect selection can lead to surface defects, inadequate coating, or increased costs. 

Technical Parameters – What Do They Tell?

1) Fan Angle (e.g.: 10°, 20°, 40°...)

The fan angle determines the surface width of the spray pattern:

Acute angles (10°–30°): Precise applications, narrow surfaces

Medium angles (40°–60°): General painting work

Obtuse angles (80°–120°): Large surfaces such as walls, exteriors

Fan width example:Fan angle 50° → provides coverage of approximately 50 cm width (at a distance of 12")

 

2) Orifice (Hole) Size

The Orifice number determines the flow rate and material permeability:

Orifice (inch)

Application Recommendation

0.006 – 0.013

Fine coatings, lacquer, varnish

0.013 – 0.015

Oil-based paints

0.017 – 0.021

Latex & general paint

0.021 – 0.029

Thicker latex, elastomeric

0.029 – 0.061

Heavy coatings such as filler & epoxy

Small orifice = thinner coatingLarge orifice = high volume, thick coating

 

Exitflex Product Families – Quick Look

 

Speedy 6 Spray Tips

Designed for everyday professional use with Swiss construction

715+ different types and sizes to choose from

Ergonomics + quick installation and safe handling via integrated seal

Application:

General paint jobs

Thin/flat surfaces

Medium pressure projects

 

Speedy 7 Spray Tips

Optimized for high pressure and heavy duty

Withstand up to 5000–7700 psi

More line striping & wide-angle options

Application:

Heavy industry

Exterior

Heavy coating projects

 

Air Assisted / Airless Dual Types

Suitable for both airless and air-assisted applications

Provides more controlled atomization

Perfect for fine surfaces and detail work

 

Selection Chart – Quick Guide

Application

Fan Angle

Orifice

Recommended Type

Cabin Full Fine Paint

10°–20°

0.006–0.010

Fine / Low Pressure

Door & Furniture

20°–40°

0.010–0.015

Fine Finish

Wall & Facade Painting

50°–120°

0.017–0.025

Production

Sport & Line Marking

20°

0.012–0.018

Line Striper

Heavy Coating

60°+

0.025–0.061

High Volume

 

Compatibility – Which Systems Does Exitflex Spray Tips Work With?

Exitflex tips are compatible with most airless spray guns (7/8" or 11/16" threads). It can also be used with universal guard systems such as TwinFit®.

Advantages:

Compatibility with various dyeing machines

Quick assembly & removal

Cleaner and more controlled spray pattern

 

Usage Scenarios & Recommendations

Cabin & Small Parts

Narrow fan angles + small orifice

Less overspray

Wall & Large Surfaces

Wide fan angle + medium/large orifice

Suitable for quick coating

Heavy Coating

Thick coatings + high flow

Line striper or Twin types

 

Common Mistakes

Uncontrolled overspray with too large fan angleInadequate coating with wrong orifice
Wrong material fit for Air-assisted

Always account for paint type, viscosity, and surface area.

 

How to Choose the Right Exitflex Tip?

1) Determine the Application Type

The choice of spray tip depends on the purpose of application. The following criteria form the basis of the selection process:

  1. A) Size of the Surface

Small detail work (door, furniture, cab): Narrow fan angle tips

Middle surfaces (wall, roof): Middle fan angled ends

Large surfaces (façade, large panels): Wide fan-angled tips

Fan width directly affects surface coating speed; wide fan = faster coating but more overspray, narrow fan = more controlled but slower coating.

 

2) Understand the Fan Angle / Pattern Width

Spray tips usually have a three-digit code (e.g. 517). The first digit  of this code indicates the fan pattern angle and therefore the coating width.

How to read?

First digit × 10 = estimated fan angle (degrees)
⇒ Example: "5" → ≈ 50° fan angle

This angle gives an approximate width at a distance of 30 cm
⇒ 5 → 5×5 cm ≈ 25 cm fan width (Note: This value may vary slightly depending on the manufacturer and pressure.)

Fan angle selection:

10°–30°: Detailed work, narrow surfaces

40°–60°: General paint jobs

80°+ : Large surfaces, exterior

 

3) Select Orifice (Orifice/Hole) Size

The last two digits in the tip code represent the orifice (atomization hole) size (in thousands of inches). This value is  directly related to the flow volume and coating thickness.

Technical Impact

Smaller orifice: Thin coating → less material migration

Larger orifice: Thicker coating → more material passes

As the orifice grows, the material spreads wider and thinner with the same fan width.

Practical Recommendations

Material Type

Orifice Range

Thin coatings (varnish, clear coat)

.009 – .013

General paint & interior (latex, acrylic)

.015 – .019

Heavy coatings (elastomeric, filler)

.021 – .035+

Example: "517" tip — 50° fan + .017 orifice → suitable for medium surfaces and medium viscosity paints.

 

4) Check Machine Compatibility

The spray tip  should not exceed the maximum tip size supported by the airless sprayer model you choose  . Because:

Excessively large orifices cause pressure drop

Uneven atomization

It can cause pump and motor overload.

 Be sure to check the max tip size value in the technical data sheet of the machine you will use.

 

5) Pressure & Viscosity Balance

The quality of the spray stream is not only related to the tip but  also to the application pressure:

Higher pressure → smaller droplets → more uniform surface

However, if used with high pressure, inappropriate tip,  it  can overspray and waste paint

According to the viscosity of the material:

Fine materials atomize well with low pressure

High pressure may be required for thick coatings

 

6) Test Spray and Setting Review

Practical trial after choosing the right tip:

Test On Carton/Sheet:

Check the pattern width and the distribution of the dye

If the coating is too thin → the larger the orifice / narrower the fan

Smaller  orifice / wider fan → if too thick or drop by drop

In standard practice, hold the tip at a distance of 12–30 cm and examine whether the pattern is uniform.

 

7) Performance and Efficiency Tips

Narrow fan + small orifice: Controlled application in detail work
Medium fan + medium orifice: Wall, interior painting
Wide fan + large orifice: Large surfaces / fast coating
Must be changed every time the tip wears out: Worn ends expand and quality deteriorates

 

Summary — Selection Steps

Determine the type of surface

Calculate fan width (according to job area)

Choose Orifice size according to paint viscosity

Check machine compatibility

Detect pressure setting

Test spray and fine-tune

 

Conclusion

Choosing the right spray tip  is not just about reading code, but also about optimizing the application area, material type, pressure and tip compatibility together. This technical process, combined with quality tips like Exitflex, maximizes surface finish and efficiency.