İçeriğe geç

EL7 Digital Hydraulic Valve Control | Hidroman

EL7 Digital Hydraulic Valve Control | Hidroman

EL7 Digital Hydraulic Valve Control | Hidroman

EL7 Digital Hydraulic Valve Control Unit | ARGO-HYTOS – Hidroman

Digital Control Technology for Hydraulic Proportional Valves

Precise motion control, stable operation and energy efficiency in hydraulic systems depend not only on the valves themselves but also on the electronic technology used to control them.

Digital electronic control units provide flexible parameter settings, multiple command signal options and advanced communication capabilities compared with conventional analog control solutions.

The ARGO-HYTOS EL7 digital electronic control unit is designed to control single or double solenoid hydraulic proportional valves in an open-loop configuration. Its compact DIN connector design, Bluetooth parameterization and CANopen communication support make it suitable for integration into different hydraulic applications.

Hidroman offers EL7 as part of its hydraulic control and ARGO-HYTOS product solutions for industrial and mobile hydraulic systems.

What Is the EL7 Digital Control Unit?

EL7 is a digital electronic control unit that controls the solenoid coils of hydraulic proportional valves. It can be used with single or double solenoid valve configurations and regulates the electrical command applied to the solenoid coil.

EL7 operates on an open-loop control principle. This means that the unit does not independently measure the position of the valve spool or provide spool position feedback. Instead, it processes the electrical command signal and controls the solenoid coil accordingly.

Its functions include input signal selection, ramp adjustment, PWM frequency configuration and channel-specific parameter settings for double-solenoid applications.

Key Features of EL7

  • Wireless parameter setting via Bluetooth

  • Configuration and monitoring through Android and iOS applications

  • CANopen communication support

  • Analog command signal control

  • Compatibility with single or double solenoid proportional valves

  • Compact DIN connector design

  • 9–32 V DC supply voltage

  • Adjustable PWM output frequency

  • Ramp, linearization, offset and deadband settings

  • LED status indication

  • Parameter and configuration file management

  • Design resistant to mechanical shock, vibration and electrical interference

Bluetooth Parameterization and Monitoring

One of the key advantages of EL7 is the ability to configure control parameters through a Bluetooth connection.

Using the mobile application designed for Android and iOS devices, users can adjust control parameters and monitor configuration settings.

This is particularly useful during:

  • Commissioning of new hydraulic systems

  • Proportional valve adjustment

  • Machine performance optimization

  • Maintenance and service operations

  • Parameter changes for different operating conditions

Mobile parameterization helps simplify field configuration and reduces the need for separate programming equipment in suitable applications.

Single and Double Solenoid Valve Control

EL7 supports hydraulic proportional valve applications with either a single or double solenoid coil.

For single-solenoid applications, the control unit can be mounted on the solenoid coil connector socket using the EN 175301-803-A connection design.

For double-solenoid applications, the second coil is connected through the appropriate cable and connection arrangement.

Depending on the application, the control unit can be configured for valve-mounted DIN connector installation or a panel-mounted DIN rail arrangement.

PWM Control and Hydraulic Valve Performance

PWM (Pulse Width Modulation) is a method used to control the electrical power supplied to a solenoid coil.

EL7 uses a PWM output signal for solenoid coil control. Adjusting the PWM frequency according to the application helps optimize the valve's operating characteristics.

Potential benefits include:

  • Control of electrical energy supplied to the solenoid coil

  • Reduced coil heating

  • Support for lower valve hysteresis

  • Improved control accuracy

  • More consistent valve response

The EL7 product page specifies an adjustable PWM output frequency range of 80–1000 Hz. The appropriate frequency must be selected according to the valve and solenoid coil specifications.

Ramp, Linearization, Offset and Deadband Functions

EL7 provides parameterization functions that allow the control signal response to be adjusted according to application requirements.

Ramp: Controls how quickly the command signal increases or decreases, helping achieve smoother valve response.

Linearization: Supports adjustment of the relationship between the input command and the valve response.

Offset: Helps adjust the valve's starting or reference operating point.

Deadband: Allows adjustment of the command signal range in which no valve response is required.

For double-solenoid applications, relevant parameters can be adjusted separately for each channel.

These functions can be useful in mobile machinery and industrial hydraulic systems requiring controlled and precise movement.

CANopen Communication and Analog Input Options

EL7 can be controlled through analog command signals or by connection to a CAN bus.

The existing product information specifies CANopen communication and protocol information according to EN 50325-4 + DS408.

Support for different analog input signal types makes it easier to adapt the control unit to various machine control architectures.

Input signal configuration must be selected according to the control system and the exact EL7 version.

EL7 Technical Specifications

Technical propertySpecification
ProductEL7 digital electronic control unit
Control typeOpen-loop
Compatible valve configurationSingle or double solenoid proportional valve
Supply voltage9–32 V DC
ParameterizationBluetooth
Mobile applicationAndroid and iOS
CommunicationAnalog input / CANopen
CAN protocol informationEN 50325-4 + DS408
PWM frequency80–1000 Hz
Processor32-bit low-power processor
Analog-to-digital converter12-bit A/D
ConnectionDIN connector / application-dependent panel version
Parameter functionsRamp, linearization, offset, deadband
Status indicationLED

Technical note: Specifications may vary depending on the product version, input signal type, solenoid configuration and control setup. Always refer to the manufacturer's documentation for the exact EL7 model before installation.

Typical Applications of EL7

EL7 can be used in hydraulic applications where digital configuration of proportional valve control is required.

Mobile Hydraulic Systems

It can be considered for proportional valve control in construction machinery, mobile equipment and vehicle-mounted hydraulic systems.

Industrial Hydraulic Machinery

Suitable applications may include presses, production machinery, special-purpose equipment and hydraulic power units using compatible proportional valves.

Precision Motion Control

Its adjustable ramp, offset and deadband parameters provide control flexibility in applications requiring controlled acceleration and deceleration.

Hydraulic Machine Modernization

EL7 may be considered for upgrading suitable older analog-controlled proportional valve systems with digital control electronics. Compatibility must be checked against the valve model and electrical connection requirements.

From Analog to Digital Hydraulic Control

In conventional analog control systems, parameter settings and available control functions may be limited by the electronic hardware.

Digital control units such as EL7 provide additional capabilities, including multiple input signal options, Bluetooth parameterization, CANopen communication and adjustable PWM control.

These features can help improve the control architecture of existing hydraulic systems and optimize machine performance according to application requirements.

However, installing a digital control unit alone does not convert a hydraulic system into an IoT-enabled or closed-loop control system. Such applications require an appropriate sensor configuration, feedback devices, control architecture and communication infrastructure.

Hidroman and ARGO-HYTOS Digital Hydraulic Control Solutions

Hidroman provides hydraulic components, proportional valve products and electronic control solutions for industrial and mobile hydraulic applications.

The ARGO-HYTOS EL7 digital electronic control unit combines Bluetooth parameterization, analog or CANopen command options and single- or double-solenoid valve support.

Contact Hidroman for assistance with selecting the appropriate EL7 version, checking compatibility with your existing proportional valve and evaluating connection requirements.

Hidroman – Digital control, engineering and technology solutions for hydraulic systems.

Frequently Asked Questions

What does the EL7 digital control unit do?

EL7 is a digital electronic control unit designed to control the solenoid coils of single- or double-solenoid hydraulic proportional valves.

Can EL7 be configured via Bluetooth?

Yes. Parameters can be configured and monitored through a Bluetooth connection using the Android and iOS mobile applications.

Does EL7 support CANopen?

Yes. The product information specifies CANopen communication and protocol information according to EN 50325-4 + DS408.

What supply voltage does EL7 require?

The specified supply voltage range is 9–32 V DC.

Can EL7 control single- and double-solenoid valves?

Yes. It supports suitable single- or double-solenoid proportional valve configurations.

Does EL7 provide closed-loop control?

The existing product description identifies EL7 as an open-loop control unit. It does not independently provide valve spool position feedback.

What is the PWM frequency range of EL7?

The current EL7 product page specifies an adjustable PWM output frequency range of 80–1000 Hz. The correct setting depends on the valve and solenoid coil specifications.

Can EL7 be used to upgrade older analog proportional valves?

Some compatible valve systems may be upgraded with digital control electronics. Valve connections, coil specifications, input signals and electrical compatibility must be verified before installation.