İçeriğe geç

DCFC Double Lock Valve for Hydraulic Cylinders | Hidroman

DCFC Double Lock Valve for Hydraulic Cylinders | Hidroman

DCFC Double Lock Valve for Hydraulic Cylinders | Hidroman

DCFC Series Flange-Mounted Twin Locking Valve for Hydraulic Cylinders

Preventing unintended movement in double-acting hydraulic cylinders is important for machine safety and controlled operation. Hydraulic line damage, hose failure or pressure loss can affect cylinder movement, making suitable load-holding and motion-control valves an important part of hydraulic circuit design.

Hidroman's DCFC series flange-mounted twin locking valve is designed to control the two hydraulic lines of a double-acting cylinder. It helps maintain cylinder position and reduce the risk of uncontrolled movement when used in a correctly designed hydraulic circuit.

Its flange-mounted configuration allows direct installation on a compatible cylinder, positioning the valve close to the cylinder ports.

Correct selection requires consideration of operating pressure, load conditions, flow rate, pilot-control requirements and the cylinder mounting interface.

What Is a Hydraulic Twin Locking Valve?

A hydraulic twin locking valve is a valve assembly that controls flow at both ports of a double-acting hydraulic cylinder to help prevent unintended movement.

In a pilot-operated locking arrangement, the appropriate pilot pressure allows the relevant locking element to open when cylinder movement is required. When the required control pressure is absent, the valve helps block flow and maintain the cylinder's position.

Twin locking valves are used in hydraulic systems where load holding, position retention and reduced risk of uncontrolled cylinder movement are important.

Important: A locking valve alone does not eliminate every system risk. The cylinder, load, valve, hydraulic lines and overall circuit must be evaluated together. Critical lifting applications may require independent mechanical safety measures.

How Does the DCFC Series Flange-Mounted Twin Locking Valve Work?

The DCFC series is described as a twin locking valve for double-acting hydraulic cylinders. Its flange-mounted configuration allows direct installation on a compatible cylinder.

During normal operation, pilot pressure in the relevant circuit enables the valve to open according to its design, allowing controlled cylinder movement. When the required control pressure is absent, the locking function helps prevent unintended flow and movement.

In the event of a hose or pipe failure, a suitably selected and correctly installed valve may reduce the risk of uncontrolled cylinder movement. The actual level of protection depends on the valve characteristics, load conditions and hydraulic circuit design.

DCFC Series Technical Specifications

Specification

Product information

Series

DCFC

Product type

Flange-mounted twin locking valve

Application

Double-acting hydraulic cylinders

Body material

Aluminum

Connection options

BSP; NPT or metric available on request

Seal

Nitrile O-ring (NBR)

Operating temperature

−30°C to +110°C

Heat treatment

Internal components

Mounting

Direct flange mounting on the cylinder

Main function

Load holding and reduced risk of uncontrolled cylinder movement

Technical note: Maximum operating pressure, flow capacity, pilot ratio, permitted load, flange dimensions and connection geometry are not specified on the available product page. Verify these parameters using the technical drawing and product documentation before ordering.

Benefits of a Hydraulic Twin Locking Valve

Helps maintain cylinder position

When correctly selected and integrated into the hydraulic circuit, a twin locking valve helps block flow at the cylinder ports when the required control pressure is absent, reducing the risk of unintended load movement.

Direct cylinder mounting

The flange-mounted design allows the valve to be positioned close to the cylinder. With a compatible installation, this can help reduce the length of the connection between the valve and cylinder.

Reduced risk from hydraulic line failure

In the event of a hose or pipe failure, a suitable locking valve may reduce the risk of uncontrolled cylinder movement. Correct valve selection, installation and circuit design are essential.

Control of both cylinder directions

The twin-valve arrangement controls both hydraulic lines of a double-acting cylinder. This supports the management of extension and retraction according to the hydraulic circuit design.

Integration into mobile and industrial systems

Subject to verified pressure, flow and mounting requirements, the DCFC series may be considered for a range of mobile and industrial hydraulic applications.

Typical Applications

Flange-mounted twin locking valves such as the DCFC series may be considered where cylinder position retention and controlled movement are required, including:

  • Construction machinery and mobile hydraulic equipment

  • Agricultural machinery

  • Lifting and positioning mechanisms

  • Industrial machinery

  • Custom equipment using double-acting hydraulic cylinders

  • Hydraulic systems requiring load holding and controlled movement

Suitability should be verified through the machine's risk assessment and the valve's technical ratings. For critical lifting applications, a hydraulic locking valve does not replace required mechanical safety systems.

How to Select a Flange-Mounted Twin Locking Valve

Correct selection involves more than matching the connection size. Consider the following factors:

  1. Cylinder type: Confirm that the cylinder is double-acting and that its port arrangement matches the valve.

  2. Operating pressure: Compare normal and maximum system pressure with the valve's rated operating range.

  3. Flow rate: Determine the required cylinder speed and flow rate.

  4. Load conditions: Evaluate the load, its direction and potential dynamic effects.

  5. Pilot control: Confirm the opening behaviour and pilot-pressure requirements against the hydraulic schematic.

  6. Flange interface: Verify mounting dimensions, port geometry and mating surfaces.

  7. Fluid and temperature: Check hydraulic fluid compatibility and suitability of the NBR seals.

  8. Safety requirements: Evaluate hose-failure scenarios, load movement and the need for additional safety measures at system level.

Reviewing the cylinder drawing and hydraulic schematic before selecting the valve is recommended.

Twin Locking Valves vs. Twin Load-Holding Valves

Twin locking valves and twin load-holding valves may be used in related applications, but their operating characteristics should not be assumed to be identical. Internal design, pilot control, load movement and pressure-control behaviour can differ.

The DCFC series should be presented as a flange-mounted twin locking valve for hydraulic cylinders. If the application requires a different load-holding function, the relevant valve's technical data and the hydraulic circuit requirements must be evaluated separately.

Hidroman DCFC Series Twin Locking Valve

Load holding and controlled cylinder movement depend on correct valve selection, circuit design and installation. Hidroman's DCFC series flange-mounted twin locking valve provides a solution for controlling both hydraulic lines of a double-acting cylinder.

For a quotation or technical assessment, provide the cylinder dimensions, mounting drawing, operating pressure, flow rate and load conditions, where available.

Contact Hidroman to discuss the DCFC series twin locking valve for your hydraulic cylinder. Your application requirements can then be reviewed to identify a suitable configuration.

Frequently Asked Questions

What does a hydraulic twin locking valve do?

It controls flow at both ports of a double-acting cylinder to help maintain position and reduce the risk of unintended movement.

Which cylinders is the DCFC series designed for?

The product page identifies the DCFC series for double-acting hydraulic cylinders. Port arrangements and flange dimensions must be verified.

Can the DCFC valve be mounted directly on a cylinder?

Yes. It is described as a twin locking valve with direct flange mounting on the cylinder. Compatibility depends on the mounting dimensions and port configuration.

What is the operating temperature range?

The product page specifies −30°C to +110°C.

What are the maximum pressure and flow ratings?

These values are not listed on the available page. Confirm them using the product's technical documentation before selection.

Does a twin locking valve guarantee that a load will remain completely safe?

A correctly selected valve in a suitable hydraulic circuit helps reduce the risk of uncontrolled movement, but it does not eliminate every hazard. Additional mechanical safety measures may be required depending on the application.

These might interest you