İçeriğe geç

Argo Hytos Turkey

Argo Hytos Turkey

Argo Hytos Turkey

ARGO-HYTOS Hydraulic Products in the USA | Filters, Valves, Pumps and Technical Components

ARGO-HYTOS is a manufacturer specializing in hydraulic systems, fluid management, motion control, and filtration technology. Its product portfolio includes hydraulic filters, directional control valves, proportional valves, gear pumps, pressure switches, manifolds, power packs, and hydraulic accessories for industrial and mobile equipment applications.

Hidroman provides application-focused support for customers sourcing ARGO-HYTOS hydraulic components. Product selection should be based on the exact part number, operating pressure, flow rate, mounting dimensions, connection type, fluid requirements, and equipment specifications.

ARGO-HYTOS Product Portfolio

The ARGO-HYTOS product range can be organized into three main technology categories:

  • Fluid filtration: Suction filters, return filters, pressure filters, high-pressure filters, return-suction filters, and offline filtration units.

  • Fluid monitoring and control: Contamination monitoring devices, sensors, pressure switches, measurement equipment, and external filtration systems.

  • Fluid and motion control: Directional control valves, solenoid valves, proportional valves, pressure control valves, check valves, flow control valves, and manifolds.

The portfolio also includes SPA 01, SA4, and SMA 05 power pack series, hydraulic pumps, connection plates, reservoir solutions, and hydraulic accessories.

1. ARGO-HYTOS Hydraulic Accessories

Hydraulic accessories support equipment installation, fluid level monitoring, maintenance, and everyday hydraulic system operation.

Stud Kits and Mounting Accessories

The following stud kits are listed for short levers associated with ISO 02, ISO 03, ISO 05, CETOP 02, CETOP 03, and CETOP 05 interfaces:

  • D02 — size 04

  • D03 — size 06

  • D05 — size 10

Confirm the required interface and dimensions against the manufacturer's documentation before ordering.

SCP Nonstandard Plugs

Listed connection sizes:

  • 3/4-16 UNF

  • 7/8-14 UNF

  • M20×1.5

  • M22×1.5

  • M27×2

  • G1/8

RCA Manual Hand Pump

The RCA manual hand pump is listed for applications requiring manually generated hydraulic pressure. The existing Hidroman page specifies a maximum operating pressure of 250 bar (3,600 psi).

The listed description highlights a simple, reliable design, pressure and suction check valves, and a handle that can rotate through 360 degrees.

Confirm the exact connection configuration and operating limits before selecting the pump for a specific application.

Other Hydraulic Accessories

  • SMT: Screw-in mounting accessories.

  • AV and TV oil drain valves: Components intended to facilitate controlled hydraulic reservoir draining and maintenance.

  • DG 023 and DG 902 clogging indicators: Filter condition indicators for which the existing page lists a response or switching pressure of up to 5 bar.

Oil Level Indicators and Thermometer Models

C5 series:

  • C5.3511

  • C5.3516

  • C5.3529 — thermometer-equipped version

The existing page lists a gauge length of up to 194 mm and temperature indication up to 80°C for C5.3529.

C4 series:

  • C4.0410

  • C4.0412

  • C4.0421

  • C4.0431

  • C4.0450

  • C4.0464

The C4 series includes oil level monitoring options for different reservoir and installation configurations. Verify dimensions, mounting arrangements, and connection specifications against the relevant product documentation.

2. ARGO-HYTOS Hydraulic Filtration Products

Hydraulic filtration helps control particulate contamination and protect pumps, valves, actuators, and other sensitive components. Filter selection should consider flow rate, operating pressure, pressure drop, filter element specifications, oil viscosity, and the required fluid cleanliness level.

2.1. Hydraulic Suction Filters

Suction filters are installed in hydraulic reservoirs or suction lines to help control contamination entering the pump circuit.

Tank-mounted models:

  • S0.0426

  • S0.0638

  • AS010

  • AS025

  • AS040

  • AS060

  • AS080

  • AS100

  • AS150

In-line, high-performance models:

  • LS025

  • LS035

  • LS 040

  • LS075

In-line Lightline models:

  • SFL 025

  • SFL 035

  • SFOL 040

  • SFL 075

Tank-top mounted models:

  • ES075

  • ES094

Select the appropriate configuration according to pump flow, installation requirements, and the permissible pressure drop on the suction side.

2.2. Hydraulic Return Filters

Return filters help remove particulate contamination from hydraulic fluid returning to the reservoir.

In-line, high-performance models:

  • D 090

  • D100

  • D170

  • D230

In-line Lightline models:

  • RFL 090

  • RFL 100

  • 170

  • RFL 230

Tank-top or in-line, high-performance models:

  • FR 043

  • FR 072

Tank-top, high-performance models:

  • E 094

  • E103

  • E143

  • E212

  • E222

  • E303

  • E444

  • E454

  • E464

  • E 503

  • E644

  • E 703

Tank-top Lightline models:

  • RFT 103

  • RFT 143

  • RFT 222

  • RFT 454

  • RFT 464

Tank-mounted, high-performance models:

  • E441

  • E451

  • E461

  • E641

  • E700

Multifunctional filtration unit:

  • MFE 200

Return filter selection should account for maximum return flow, oil viscosity, cold-start conditions, filter element specifications, and allowable pressure drop.

2.3. Hydraulic Return-Suction Filters

Return-suction filters combine return and suction filtration functions in configurations intended for specific hydraulic circuit designs.

In-line, high-performance models:

  • E068

  • E088

  • E178

  • E258

Tank-top mounted, high-performance models:

  • E 084

  • E158

  • E198

  • E248

  • 328

  • E498

  • 598

  • E998

The codes are retained as published on the source page. The exact ordering designations for 328 and 598 should be verified with the manufacturer because the displayed entries do not include the E prefix used by several neighboring models.

2.4. Hydraulic Filter-Cooler Units

FNK 0

  • Maximum operating pressure listed on the source page: 10 bar (145 psi).

  • The original text contains a corrupted nominal flow specification; confirm the exact value in the manufacturer's technical documentation.

  • Listed cooling capacity: up to 45 kW.

FNK 100

  • Maximum operating pressure listed on the source page: 10 bar (145 psi).

  • The source text associates the nominal flow specification with approximately 33 gpm; confirm the exact rating before specifying the unit.

  • Listed cooling capacity: up to 45 kW.

Filter-cooler selection should consider fluid flow, heat load, operating pressure, and the system's thermal management requirements.

2.5. Hydraulic Pressure Filters

Pressure filters remove contamination from hydraulic fluid under pressure.

In-line, high-performance models:

  • D 042

  • 062

  • 072

  • D112

  • D152

  • D 162

  • D232

  • D 332

Wordline 400 series:

  • HD 790

  • HD 990

Wordline 300 series:

  • HD 319

  • HD 419

  • HD 619

Wordline 200 series:

  • HD 152

  • HD 172

Wordline 100 series:

  • HD 049

  • HD 069

In-line filter series:

  • FNL 1000

  • FNL 2000

In-line high-security filter models:

  • HD 040

  • HD081

  • HD 150

Listed filter kit or element codes:

  • HD 049

  • HD 069

  • HD 172

  • HD319

  • HD419

  • HD619

Filter housings, replacement elements, and maintenance kits may have different ordering requirements. Confirm the exact component code and compatibility before ordering.

2.6. Hydraulic High-Pressure Filters

Bidirectional, in-line, high-performance models:

  • HD 417

  • HD 617

Flanged, high-performance models:

  • HD 044

  • HD 064

  • HD 314

  • HD 414

  • HD 614

High-pressure filter selection requires verification of maximum operating pressure, flow rate, connection standard, pressure differential, and filter element compatibility.

2.7. Hydraulic Reservoir Filling and Breather Filters

Standard breather filters:

  • L1.0406

  • L1.0506

  • L1.0706

  • L1.0807

Vandal-resistant breather filters:

  • L1.0808

  • L1.0809

  • LE.0716

  • LE.0817

  • LE.0827

  • LE.0818

  • LE.0819

Desiccant breathers:

  • LT.1021-51

  • LT.1325-51

Reservoir breathers help control particulate contamination entering through air exchange. Desiccant breathers can also help manage moisture in suitable applications.

2.8. Offline Hydraulic Filtration Units

Offline filtration units operate through a separate filtration circuit and can help maintain fluid cleanliness independently of the main hydraulic circuit.

Listed models:

  • FNA 008

  • FNA 016

  • FNA 045

  • FNA 040-553

  • FNU 008

  • FNS040

  • FNS060

  • FN 060

  • FN 300

Selection should be based on the required cleanliness level, reservoir volume, filtration cycle, flow rate, filter element, and operating conditions.

3. ARGO-HYTOS Manifolds, Valve Blocks, and Connection Plates

Hydraulic manifolds and connection plates allow valves and other components to be integrated into compact hydraulic assemblies. The listed products include mounting plates for CETOP directional valves, bodies for screw-in cartridge valves, and base configurations for pressure relief functions.

Subplates for Body-Mounted and Modular Valves

  • PD04: Series plate with side ports for ISO 4401-02 valves.

  • DR1-04: Series plate.

  • PD06: Series plate with side ports for ISO 4401-03 valves.

  • DR2-06: Series plate.

  • PD10: Series plate with side ports for ISO 4401-05 valves.

  • DK1-04 (06, 10): Blanking plates.

  • DA-06/04, 10/06: Adapter plate options.

  • DP-04 (06, 10): Subplate options.

Plates and Bodies for Screw-In Cartridge Valves

  • DP-04 (06, 10): Subplate series.

  • SB-04 (06, 10): Plate or body options for screw-in valve applications.

Power Pack and Manifold Bases with Integrated Pressure Relief

  • DP6: Base manifold with pressure relief valve.

  • ZB06: Base section with pressure relief valve for series-plate arrangements.

  • ZB10: Base section with controlled pressure relief for series-plate configurations.

When selecting a manifold, verify the valve interface, port dimensions, operating pressure, flow requirements, internal circuit design, and pressure relief requirements.

4. ARGO-HYTOS Pressure Switches

Pressure switches provide electrical switching or control signals when hydraulic pressure reaches a specified threshold.

TS4 and MTS — Mechanical Pressure Switches

The existing Hidroman page lists the following specifications:

  • Sizes: 06 (D03) and 10 (D05).

  • Maximum pressure: 350 bar (5,100 psi).

  • Robust design intended to withstand vibration and shock.

  • Wide adjustment range, with factory presetting or field adjustment options.

  • Modular design and manifold integration options.

  • AC and DC electrical supply options.

  • Fluid connection: G1/4 and connection options referenced to DIN ISO 16873.

  • Subplate configurations referenced to ISO 4401 and DIN 24340, including CETOP 03 and CETOP 05.

TSE1 — Electrical Pressure Switch

Listed specifications:

  • Maximum pressure: 400 bar (5,800 psi).

  • Piezoelectric pressure sensing.

  • Stainless steel construction as described on the source page.

  • Measurement repeatability specified as ±1%.

  • Integrated adjustment capability.

  • Maximum switching frequency: 100 Hz.

  • Body rotatable through 320 degrees.

TSE2-D — Electronic Pressure Switch

Listed specifications:

  • Maximum pressure: 400 bar (5,800 psi).

  • Digital pressure display.

  • Display and body rotation through 320 degrees.

  • 4–20 mA analog output.

  • High-precision ceramic sensing element.

  • Robust, shock-resistant design.

  • Resistance to electromagnetic interference.

  • 12-bit microprocessor-based electronics with error-code display.

TS3 MTS — UL/CSA-Certified Sandwich-Plate Pressure Switch

Listed specifications:

  • Piston design for stationary and mobile applications.

  • Sizes: 06 (D03) and 10 (D05).

  • Maximum pressure: 350 bar (5,100 psi).

  • Precision adjustment using an Allen screw.

  • Factory presetting.

  • Silver-plated microswitches.

  • Modular plate and base connection.

  • CETOP 03 and CETOP 05 mounting options referenced to ISO 4401 and DIN 24340.

Verify the current product-specific pressure rating, electrical switching capacity, connection configuration, and certification scope before specifying a pressure switch.

5. ARGO-HYTOS Gear Pumps

ARGO-HYTOS gear pumps convert mechanical drive power into hydraulic flow for industrial and mobile hydraulic systems. The existing page lists Lightline and high-performance gear pump families.

Lightline Gear Pump Series

  • GP0L

  • GP1L

  • GP2L

  • GP3L

  • GPL

According to the source page, the GP0L and GPL Lightline versions are intended for a single direction of rotation. Confirm the permitted rotation direction and configuration for the exact pump model.

High-Performance Gear Pump Series

  • GP1

  • GP2

  • GP3

Listed product features include:

  • High-quality aluminum alloy construction.

  • Axial clearance compensation.

  • Design features intended to reduce operating noise.

  • High volumetric efficiency.

  • Features intended to support extended service life.

  • Product options associated with SAE, ISO, DIN, and other international standards.

The existing page states volumetric efficiency of up to 98% for the high-performance series. This figure should be treated as a published series-level claim, not a guaranteed value for every configuration.

Gear pump selection should account for displacement, rotational speed, direction of rotation, operating pressure, fluid viscosity, drive interface, and duty cycle.

6. ARGO-HYTOS Directional Control Valves and Solenoid Systems

Directional control valves regulate the direction of hydraulic flow and control the movement of actuators such as cylinders and hydraulic motors.

Manually Operated 4/2 and 4/3 Directional Valves

  • RPR3-04

  • RPR3-06

  • RPR1-10

Hydraulically Operated 4/2 and 4/3 Directional Valves

  • RPH2-6

  • RPH3-06

Solenoid-Operated 4/2 and 4/3 Directional Valves

  • RPEK1-03

  • RPEK1-03/B

  • RPE2-04

  • RPEL1-04

  • RPE3-04

  • RPEL1-06

  • RPE3-06

  • RPER3-06

  • RPEA3-06

  • RPEW4-06

  • RPET3-06

  • RPEL1-10

  • RPE4-10

  • RPEW4-10

Roller-Cam-Operated Directional Valve

  • RPK1-06 — 4/2 directional valve.

Hydraulically Operated 3/3 Directional Valve

  • SD2H-LA3 — screw-end configuration.

Internally or Externally Pilot-Operated 4/2 and 4/3 Directional Valves

  • RNEH1-10

  • RNEH5-16

  • RNEH4-25

Solenoid-Operated Spool-Type and Screw-Type Directional Valves

  • 2/2 directional valves: SD2E-A2, SD2E-B2.

  • 3/2 directional valves: PD2E1, SD2E-A3, SD2E-B3.

  • 4/2 directional valves: SD2E-A4, SD2E-B4.

Solenoid-Operated 2/2 Poppet Valves

Screw-in and modular configurations:

  • ROE3-062S2

  • ROE3-062S2M

  • SD3E-A2

  • SD3E-B2

  • SD3E-C2

Models listed with blocking functionality:

  • ROE3-042S5(S6)

  • ROE3-042S5(S6)M

  • SD1E-A2

Solenoid-Operated 3/2 Poppet Valve

  • SD1E-A3 — blocking version, screw-in configuration.

Manually Operated 2/2 Directional Valves

  • SD1M-A2/L

  • ROR3-062

Selection should account for the required hydraulic function, 4/2 or 4/3 configuration, spool position, center condition, rated flow, pressure, actuation method, and electrical specifications.

7. ARGO-HYTOS Check Valves

Check valves permit flow in the intended direction while restricting reverse flow.

Three-Way Logic Check Valves

  • VJL2-304

  • SH1F-A3

Shuttle Valves

  • LV1-043

  • LV2-043

  • LV1-063/S

  • LV1-063/M

Check Valve Models

  • VJO1-06/S

  • SC1F-A3

  • VJO1-04/M

  • SC1F-A2

  • MVJ3-06

  • VJO1-10/S

  • MVJ3-10

  • SC1F-B2

  • SC1F-C2

  • VJ3

One-Way Check Valve

  • VJS3

Pilot-Operated Check Valves — Pilot-to-Open Models

  • RJV1-05

  • VJR1-04/M

  • SC5H-Q3/I

  • 2RJV1-06/M

  • SC5H-R3/I

  • VJR3-10/M

  • SCD5H-R3/I

  • SC5H-S3/I

  • SC5H-BP3/H

Additional Pilot-Operated Check Valve Models

Listed separately on the source page:

  • SCC5H-Q3/I

  • SCC5H-S3/I

For pilot-operated check valves, verify load-holding requirements, pilot pressure, reverse-flow requirements, and application safety conditions.

8. ARGO-HYTOS Pressure Control Valves

Pressure control valves regulate, limit, reduce, sequence, or release pressure in hydraulic circuits.

Direct-Acting Poppet Pressure Relief Valves

  • SR1A-A2

  • VPP2-04/S

  • VPP2-04/M(R)

  • VPP1-06 (08, 10)

  • VPP2-06

  • VPP2-06-SV/xx-CE1017

  • SR1A-B2

  • SR1A-B2/HxSx-CE1017

  • VPP-R-16 (25)

  • VPP-R-16-xx-L-CE1017

Pilot-Operated Spool-Type Pressure Relief Valves

  • SR4E2-B2

  • VPN1-06/S

  • VPN1-06/M(R)

  • SR4A-B2

  • VPN2-10/S

  • VPN2-10/MR

  • VPN1-20/S

Pressure Reducing and Relief Valves

  • VRP2-04

  • SP2A-A3

  • VRP2-06

  • SP2A-B3

Back-Pressure-Controlled Relief Valve

  • DBV3

Sequence Valve

  • SS4A-A3

Unloading Valves

  • SU6A-U3/l

  • SUD6A-U4/l

  • SUD6A-V4/l

Select the correct pressure control valve according to pressure setting, flow, pilot requirements, cartridge or modular mounting style, and the system's safety requirements.

9. ARGO-HYTOS Flow Control Valves

Flow control valves regulate hydraulic flow, adjust actuator speed, and distribute flow between circuit branches.

Needle-Type Restrictors and Control Valves

  • VSO1-04/R

  • ST21A-B2

  • VSV2

  • ST2(C)1A-A2

Dual Throttle Check Valves

  • VSO1-04/M

  • 2VS3-06

  • VSO3-10/M

Flow Control Valve

  • VSK

Two-Way Flow Regulators

  • SF22A-A2/H

  • SF22A-B2/H

  • VSS3-062/S

  • VSS3-062/M

Three-Way Flow Control Valves

  • SF32A-B3

  • SF32A-K3/l

One model entry in this section is corrupted in the source text. The original model designation should be checked against the manufacturer's documentation rather than reconstructed from incomplete text.

Flow Divider and Combiner Valves

  • SFD2F-B4/l

  • SFD2F-D4/l

Flow control selection should consider required flow, pressure differential, fluid viscosity, temperature, and the desired degree of speed-control accuracy.

10. ARGO-HYTOS Motion Control Valves

Motion control valves help regulate actuator movement and control loads in suitable hydraulic circuits.

Overcenter Valves

  • SO5A-Q3/I

  • SO5A-R3/I

  • SO5A-T3/I

Balanced Overcenter Valves

  • SOP5A-Q3/I

  • SOP5A-R3/I

  • SOP5A-T3/I

Fully Balanced Overcenter Valves

  • SOB5A-Q3/I

  • SOB5A-R3/I

  • SOB5A-S3/I

Overcenter Valves with Full Tank Enclosure

  • SOBD5A-R4/I

  • SOBD5A-S4/I

Depending on the hydraulic circuit and application, these valves can help control load movement and limit load-induced motion. Verify load pressure, pilot ratio, flow requirements, mounting style, and the manufacturer's application limits.

11. ARGO-HYTOS Proportional Valves and Electronic Controllers

Proportional valves allow hydraulic flow or pressure to be controlled progressively in response to an electrical command signal.

Proportional Directional Control Valves

  • PRM2-04

  • PRM7-04

  • PRM2-06

  • PRMR2-06

  • PRM7-06

  • PRM9-06

  • PRM6-10

  • PRM7-10

  • PRM9-10

  • PRM8-06

4/3 Proportional Directional Control Valve

  • SD2P-B4

Direct-Acting Proportional Pressure Relief Valves

  • SR1P2-A2

  • SRN1P1-A2

Pilot-Operated Proportional Pressure Relief Valves

  • SR4P2-B2

  • SRN4P1-B2

Direct-Acting Proportional Pressure Reducing Valves

  • PP2P1-W3

  • PP2P3-W3

  • PVRM1-063

  • PVRM3-103

Pilot-Operated Proportional Pressure Reducing and Relief Valves

  • SP4P1-B4

  • SP4P2-B3

  • SPN4P1-B3

Manually Operated Proportional Pressure Reducing Valve

  • PVRR1-063

Two-Way Pressure Compensators

  • TV2-042/M

  • TV2-062/M

  • TV2-102/S

  • TV2-102/M

Three-Way Pressure Compensators

  • TV2-063/S

  • TV2-043/M

  • TV2-063/M

  • TV2-103/S

  • TV2-103/M

Electronic Controllers for Proportional Valves

  • EL3E

  • EL4

  • EL6

When specifying a proportional control system, verify compatibility between the valve and electronic driver, including command signal, coil specifications, control method, flow, and pressure requirements.

12. ARGO-HYTOS Hydraulic Power Packs

The ARGO-HYTOS product portfolio includes the SPA 01, SA4, and SMA 05 power pack series.

Hydraulic power packs can be configured for the requirements of the relevant hydraulic application. Selection depends on required flow, operating pressure, duty cycle, reservoir volume, motor specifications, control options, and available installation space.

A series designation alone does not establish the exact specifications of a particular configuration. Refer to the applicable product documentation when selecting a power pack.

13. Request an ARGO-HYTOS Hydraulic Component Quote

Looking for an ARGO-HYTOS hydraulic filter, gear pump, directional control valve, proportional valve, pressure switch, manifold, or hydraulic accessory?

Contact Hidroman with your product code and application details. To support a more accurate technical review, provide the following information where available:

  • Exact product or part number

  • Existing component label or technical datasheet

  • Operating pressure and flow rate

    • Connection and mounting dimensions

    • Hydraulic fluid type and operating temperature

    • Equipment or hydraulic system details

    • Required quantity

    Hidroman can help review the application information, evaluate relevant product options, and discuss quotation requirements.

    Send Hidroman your ARGO-HYTOS part number to request technical evaluation and a quotation for your hydraulic application.

    Note: Product codes and descriptions have been compiled from the existing Hidroman ARGO-HYTOS page. Ambiguous or corrupted source specifications have been identified rather than presented as confirmed technical facts. Verify current availability, exact model configuration, certifications, and performance ratings against the manufacturer's latest documentation before ordering.


Argo Hytos Almanya Fabrika

Argo Hytos Çek Cumhuriyeti Fabrika

Argo Hytos Hindistan Fabrika

Argo Hytos Çin Fabrika

Argo Hytos Polonya Fabrika