
ARGO-HYTOS Hydraulic Filtration & Fluid Management Systems
ARGO-HYTOS Fluid Management Products: Hydraulic Oil Filtration, Off-Line Filter Units, Oil Service Equipment and Dewatering Systems
Complete Technical Guide to Industrial Hydraulic Fluid Management
Hydraulic fluid cleanliness is one of the most important factors affecting the reliability, efficiency and service life of hydraulic and lubrication systems. Solid contamination, free water and other fluid impurities can cause premature wear, internal leakage, component damage and unexpected equipment downtime.
ARGO-HYTOS Fluid Management products are designed to improve oil cleanliness, remove solid contaminants, support hydraulic system filling and maintenance, monitor fluid condition and remove water from hydraulic and lubrication oils.
The ARGO-HYTOS Fluid Management product portfolio includes off-line filters, motor-driven filtration units, portable oil service equipment, advanced oil monitoring systems, dewatering equipment and specialized filter elements.
This technical guide covers the product families, model designations, ordering codes, applications and technical characteristics presented in the ARGO-HYTOS FMA Fluid Management catalog.
1. ARGO-HYTOS Fluid Management Product Categories
The catalog covers five main product categories:
Off-Line Filters: Independent hydraulic oil filtration filters.
Off-Line Filter Units: Motor-driven filtration systems with integrated pumps.
Oil Service Units: Equipment for oil filling, transfer, cleaning and mobile filtration.
Dewatering Systems: Equipment for removing water from hydraulic and lubrication oils.
Filter Elements: Specialized filter media for solid particle and water separation.
These products are designed for industrial hydraulic systems, mobile machinery, lubrication circuits and large-capacity fluid management applications.
2. Off-Line Filters – Independent Hydraulic Oil Filtration
Off-line filtration provides an additional filtration circuit independent of the main hydraulic operating circuit.
Oil is continuously or periodically circulated through a dedicated filter housing to improve fluid cleanliness without requiring changes to the main hydraulic circuit.
2.1. FN1 040 – Compact Off-Line Filter
Product designation: FN1 040
The FN1 040 is designed for return-line filtration or off-line filtration in hydraulic and lubrication systems.
It supports EXAPOR®MAX 2 fine filtration elements and EXAPOR®AQUA water-absorbing elements.
Technical specifications:
Maximum operating pressure: 12 bar / 174 psi.
Nominal flow rate: 40 L/min / 10.6 gpm.
EXAPOR®MAX 2 filtration ratings: 3, 5 and 10 µm.
EXAPOR®AQUA filtration ratings: 3 and 7 µm.
Bypass valve cracking pressure: 3.5 bar / 51 psi.
Port connections: G1 inlet and G¾ outlet or UNF versions.
Inside-to-outside filtration flow.
Tool-free filter element replacement.
Integrated dirt retention valve.
Available filter element codes:
| Filter element code | Filter rating | Filter technology |
|---|---|---|
| V7.1220-113 | 3 µm | EXAPOR®MAX 2 |
| V7.1220-13 | 5 µm | EXAPOR®MAX 2 |
| V7.1220-06 | 10 µm | EXAPOR®MAX 2 |
| Y7.1220-113 | 3 µm | EXAPOR®AQUA |
| Y7.1220-05 | 7 µm | EXAPOR®AQUA |
Examples of standard configurations:
FN1 040G-V003-X
FN1 040G-Y003-X
FN1 040U-V003-X
The suffixes identify connection types, filter element selection and additional configuration options.
2.2. FN 060 and FN 300 – High-Flow Off-Line Filters
Product models: FN 060 and FN 300
The FN 060 and FN 300 series are designed for hydraulic and lubrication systems requiring higher filtration capacities.
The FN 060 is intended for smaller industrial installations, while the FN 300 supports high-flow industrial applications.
Main characteristics:
FN 060 maximum operating pressure: 12 bar / 174 psi.
FN 300 maximum operating pressure: 10 bar / 145 psi.
Maximum product-family flow capacity: 650 L/min / approximately 172 gpm.
Filtration ratings: 3, 5 and 10 µm.
EXAPOR®MAX 2 filter technology.
Inside-to-outside filtration.
Integrated dirt retention valve.
Automatic air bleeding valve on the FN 300.
Optional optical and electrical clogging indicators.
Catalog-listed standard models:
| Product code | Nominal flow | Filter rating |
|---|---|---|
| FN 060-193 | 60 L/min | 3 µm |
| FN 060-273 | 115 L/min | 5 µm |
| FN 300-163 | 250 L/min | 3 µm |
| FN 300-153 | 300 L/min | 5 µm |
| FN 300-156 | 650 L/min | 10 µm |
These filters are suitable for large hydraulic reservoirs, industrial power units, press systems and continuous lubrication applications.
2.3. FNS1 040 – High-Pressure Off-Line Filter with Flow Control
Product designation: FNS1 040
The FNS1 040 is designed for controlled filtration from high-pressure hydraulic circuits.
Its pressure-compensated flow control valve allows the filter to be connected to a high-pressure line while maintaining a defined filtration flow.
Technical specifications:
Maximum operating pressure: 320 bar / 4,640 psi.
Flow settings: 1, 2, 4 and 6 L/min.
Pressure-compensated flow control valve.
Bypass cracking pressure: 3.5 bar / 51 psi.
EXAPOR®MAX and EXAPOR®AQUA filter element options.
Maximum water capacity: 370 ml.
Optional optical and electrical clogging indicators.
Flow control valve part numbers:
FNS 060.1520: 1 L/min.
FNS 060.1530: 2 L/min.
FNS 060.1540: 4 L/min.
FNS 060.1550: 6 L/min.
Compatible filter elements:
V7.1220-113: 3 µm.
V7.1220-13: 5 µm.
V7.1220-06: 10 µm.
Y7.1220-113: 3 µm water-absorbing element.
Y7.1220-05: 7 µm water-absorbing element.
2.4. FNS 060 – High-Pressure Controlled Filtration
Product designation: FNS 060
The FNS 060 is designed for high-pressure hydraulic and lubrication circuits where controlled off-line filtration is required.
The pressure-compensated flow control valve regulates the amount of oil passing through the filter.
Main specifications:
Maximum operating pressure: 320 bar / 4,640 psi.
Maximum controlled flow rate: 4 L/min / 1.1 gpm.
Filter rating: 3 µm.
Minimum inlet pressure at the flow control valve: 10 bar / 145 psi.
Bypass cracking pressure: 3.5 bar / 51 psi.
EXAPOR®MAX 2 filter technology.
Optional EXAPOR®AQUA filter elements.
The FNS 060 is particularly relevant to high-pressure mobile hydraulic applications and suitable industrial circuits with sufficient surplus flow.
3. Off-Line Filter Units – Motor-Driven Filtration Systems
ARGO-HYTOS off-line filter units combine a pump, electric motor and filter housing into an integrated filtration system.
These units provide continuous or scheduled oil filtration independently of the main machine operating cycle.
3.1. FNA 014 – DC Motor Off-Line Filter Unit
Product codes:
FNA 014-16553
FNA 014-16555
The FNA 014 is a compact off-line filtration unit designed for hydraulic and lubrication systems, particularly mobile equipment with 12 VDC or 24 VDC electrical supplies.
Technical specifications:
Maximum flow rate: 14 L/min / 3.7 gpm.
Maximum operating pressure: 4 bar / 58 psi.
Standard motor: 24 VDC, 280 W.
Optional 12 VDC motor.
Gerotor pump.
Filtration rating: 3 µm or 7 µm EXAPOR®AQUA.
Maximum water capacity: 340 ml.
Recommended reservoir capacity: 100–1,500 liters.
Maximum suction height: 1.5 m.
Product configurations:
FNA 014-16553: 3 µm EXAPOR®MAX 2.
FNA 014-16555: 7 µm EXAPOR®AQUA.
3.2. FNA1 008 / 016 – Standard Off-Line Filter Units
Product models: FNA1 008 and FNA1 016
The FNA1 series provides continuous partial-flow filtration in hydraulic and lubrication systems.
Main specifications:
FNA1 008: 8 L/min / 2.1 gpm.
FNA1 016: 16 L/min / 4.2 gpm.
Maximum operating pressure: 4 bar / 58 psi.
Electric motor-driven pump.
EXAPOR®MAX 2 filter elements.
Optional EXAPOR®AQUA water-absorbing elements.
Integrated pressure relief valve.
Optional optical and electrical clogging indicators.
Convenient filter element replacement.
Available filter element codes:
V7.1220-113: 3 µm.
V7.1220-13: 5 µm.
V7.1220-06: 10 µm.
Y7.1220-05: 7 µm EXAPOR®AQUA.
Y7.1220-113: 3 µm EXAPOR®AQUA.
These units are suitable for continuous oil cleanliness improvement in small and medium-sized hydraulic reservoirs.
3.3. FNA1HV 008 / 016 – High-Viscosity Off-Line Filter Units
Product models:
FNA1HV 008
FNA1HV 016
The FNA1HV series is specifically designed for applications involving higher-viscosity hydraulic and lubrication fluids.
It is particularly suitable for transmission oils, gearbox lubrication systems and applications where oil viscosity increases significantly at low temperatures.
Technical specifications:
FNA1HV 008: 8 L/min.
FNA1HV 016: 16 L/min.
Maximum operating pressure: 5 bar / 73 psi.
G1/G¾ or UNF connection options.
EXAPOR®MAX 2 elements: 3, 5 and 10 µm.
EXAPOR®AQUA elements: 3 and 7 µm.
230 VAC or 400/460 VAC motor options.
Continuous viscosity ranges:
| Model | Motor version | Viscosity range |
|---|---|---|
| FNA1HV 008 | 230 V | 15–1,200 mm²/s |
| FNA1HV 008 | 400/460 V | 15–2,800 mm²/s |
| FNA1HV 016 | 400/460 V | 15–1,800 mm²/s |
3.4. FNA 040-553 – 40 L/min Off-Line Filtration Unit
Product code: FNA 040-553
The FNA 040-553 is designed for continuous oil cleanliness improvement in hydraulic and lubrication systems.
It can operate as an additional off-line filter or as an independent filtration system.
Technical specifications:
Nominal flow rate: 40 L/min / 10.6 gpm.
Maximum operating pressure: 8 bar / 116 psi.
Filter efficiency: β3(c) = 200.
Dirt-holding capacity: 380 g.
Electric motor: 3-phase, 400 V.
Motor power: 0.75 kW.
Replacement filter element: V7.1230-153.
Electrical differential pressure clogging indicator.
3.5. FNA 045 – High-Flow Off-Line Filter Unit
Product family: FNA 045
The FNA 045 is designed for continuous filtration in larger hydraulic reservoirs and industrial lubrication systems.
Main specifications:
Nominal flow rate: 45 L/min / 12 gpm.
Maximum operating pressure: 7 bar / 101 psi.
Integrated internal gear pump and electric motor.
EXAPOR®MAX 2 filtration.
Integrated pressure relief valve.
Optional filter clogging indicators.
Catalog-listed standard configurations:
| Product code | Filter rating | Electric motor |
|---|---|---|
| FNA 045-1553 | 3 µm | 1~230 V |
| FNA 045-1153 | 5 µm | 1~230 V |
| FNA 045-4553 | 3 µm | 3~400/460 V |
| FNA 045-4153 | 5 µm | 3~400/460 V |
Replacement filter elements:
V7.1560-103: 3 µm.
V7.1560-03: 5 µm.
3.6. FNAPC1 016 / 045 – Off-Line Filtration with Particle Monitoring
Product models:
FNAPC1 016
FNAPC1 045
The FNAPC1 series combines off-line filtration with continuous oil cleanliness monitoring.
An integrated OPCom particle monitor measures the current fluid cleanliness class. Optional LubCos H2O or LubCos H2O+ II sensors provide additional oil condition monitoring.
FNAPC1 016:
Nominal flow rate: 16 L/min / 4.2 gpm.
Maximum operating pressure: 5 bar / 72 psi.
Recommended reservoir capacity: up to 1,500 liters.
Compatible filter elements: V7.1220 and Y7.1220 series.
FNAPC1 045:
Nominal flow rate: 45 L/min / 11.9 gpm.
Maximum operating pressure: 7 bar / 101 psi.
Designed for larger hydraulic reservoirs.
Compatible filter elements: V7.1560 and Y7.1560 series.
Main filter element codes:
V7.1220-113: 3 µm.
V7.1220-13: 5 µm.
V7.1220-06: 10 µm.
Y7.1220-05: 7 µm water-absorbing.
Y7.1220-113: 3 µm water-absorbing.
V7.1560-103: 3 µm.
V7.1560-03: 5 µm.
V7.1560-06: 10 µm.
Y7.1560-05: 7 µm water-absorbing.
Oil condition sensor options:
H: LubCos H2O.
HC: LubCos H2O+ II.
X: Without an additional oil condition sensor.
The FNAPC1 series is suitable for critical hydraulic systems where both particulate contamination and oil condition need to be monitored.
4. Oil Service Units – Hydraulic Oil Filling and Filtration Equipment
Oil service units are used for filling hydraulic systems with clean oil, transferring fluids, cleaning existing oil and performing mobile filtration during maintenance operations.
4.1. CFP 03 – Compact Filter Pack
Product codes:
CFP 03-13
CFP 03-16
CFP 03-18
CFP 03-131
The CFP 03 is a lightweight and compact oil service unit designed for small hydraulic power packs and systems with limited tank access.
Applications:
Clean oil transfer.
Filling hydraulic systems with filtered oil.
Off-line filtration of small reservoirs.
Daily hydraulic maintenance and servicing.
Technical specifications:
Nominal flow rate: 3 L/min / 0.79 gpm.
Maximum operating pressure: 3.5 bar / 50.8 psi.
Electric motor power: 0.06 kW.
Weight: approximately 7.8 kg / 17.3 lb.
Filter ratings: 5, 10 or 16 µm.
EXAPOR®MAX 2 filter elements.
230 VAC or 110 VAC motor versions.
Replacement filter element codes:
V3.0510-53: 5 µm.
V3.0510-56: 10 µm.
V3.0510-58: 16 µm.
CFP-A-09/05: Special suction-return adapter that allows both suction and pressure hoses to connect through a single available tank connection.
4.2. FA1 008 – Compact Oil Service Unit
Product model: FA1 008
The FA1 008 is a portable oil service unit designed for hydraulic and lubrication system filling and cleaning.
Technical specifications:
Flow rate: up to 8 L/min / 2.1 gpm.
Maximum operating pressure: 4 bar / 58 psi.
Continuous viscosity range: 15–250 mm²/s.
Maximum suction height: 1.5 m.
Recommended reservoir capacity: up to 800 liters.
EXAPOR®MAX 2 and EXAPOR®AQUA filter options.
Available filter element codes:
V7.1220-113: 3 µm.
V7.1220-13: 5 µm.
V7.1220-06: 10 µm.
Y7.1220-05: 7 µm water-absorbing.
4.3. FA2 016 and FAPC2 016 – Oil Service and Particle Monitoring Units
Product models:
FA2 016
FAPC2 016
These oil service units are designed for hydraulic oil filling, cleaning and mobile filtration.
The FA2 016 provides the basic filtration functions, while the FAPC2 016 adds integrated oil cleanliness monitoring using the OPCom particle monitor.
Technical specifications:
Flow rate: up to 16 L/min / 4.2 gpm.
FA2 016 maximum operating pressure: 4 bar / 58 psi.
FAPC2 016 maximum operating pressure: 5 bar / 72 psi.
Continuous viscosity range: 15–250 mm²/s.
Short-term viscosity range: 15–400 mm²/s.
Filter clogging indication.
USB data transfer.
Up to 3,000 stored measurement records in the FAPC2 016.
Filter element codes:
V7.1220-113: 3 µm.
V7.1220-13: 5 µm.
V7.1220-06: 10 µm.
Y7.1220-05: 7 µm water-absorbing.
Y7.1220-113: 3 µm water-absorbing.
4.4. FA1HV 008 / 016 – High-Viscosity Oil Service Units
Product models:
FA1HV 008
FA1HV 016
The FA1HV series is designed for filling and cleaning hydraulic systems using high-viscosity oils.
It is particularly suitable for transmission oils and gearbox lubrication applications, including low-temperature operating conditions.
Technical specifications:
| Model | Nominal flow | Continuous viscosity range |
|---|---|---|
| FA1HV 008 / 230 V | 8 L/min | 15–1,200 mm²/s |
| FA1HV 008 / 400 V | 8 L/min | 15–2,800 mm²/s |
| FA1HV 016 / 400 V | 16 L/min | 15–1,800 mm²/s |
Additional characteristics:
Maximum operating pressure: 5 bar.
EXAPOR®MAX 2 filter elements.
Optional EXAPOR®AQUA elements.
Integrated suction and pressure hoses.
Portable service configuration.
4.5. UM2 045 – Mobile Oil Service Unit
Product models: UM2 045F and UM2 045A
The UM2 045 is a professional mobile oil service unit designed for high-flow filtration, oil transfer and hydraulic system cleaning.
Main applications:
Filling hydraulic systems with filtered oil.
Oil transfer.
Off-line filtration.
Cleaning existing hydraulic oil.
Pumping oil without filtration.
Technical specifications:
UM2 045F: Fixed flow rate of 45 L/min / 11.9 gpm.
UM2 045A: Adjustable flow range of 20–70 L/min / 5.3–18.5 gpm.
Maximum operating pressure: 7 bar / 101 psi.
Filter dirt-holding capacity: up to 4,000 g, depending on element and flow conditions.
EXAPOR®MAX filter elements.
EXAPOR®SPARK PROTECT options.
EXAPOR®AQUA water-absorbing elements.
Available motor voltages: 110–120 V, 220–240 V and 400–460 V.
Main filter element codes:
V7.1560-103: 3 µm.
V7.1560-03: 5 µm.
V7.1560-06: 10 µm.
Z7.1560-103: 3 µm EXAPOR®SPARK PROTECT.
Y7.1560-05: 7 µm EXAPOR®AQUA.
4.6. UMPCL2 045 – Mobile Oil Service Unit with Integrated Particle Monitor
Product models: UMPCL2 045F and UMPCL2 045A
The UMPCL2 045 combines high-efficiency oil filtration with continuous particle monitoring.
The integrated OPCom particle monitor measures oil cleanliness during filling and cleaning operations. Measurement data can be stored internally and transferred to a computer through the USB interface.
Technical specifications:
UMPCL2 045F: Fixed flow rate of 45 L/min.
UMPCL2 045A: Adjustable flow rate of 20–70 L/min.
Maximum operating pressure: 7 bar.
Integrated OPCom particle monitor.
Filtering and pumping-without-filtering operating modes.
Selectable upstream and downstream measurement points.
EXAPOR®MAX 2 elements: 3, 5 and 10 µm.
EXAPOR®SPARK PROTECT: 3 µm.
EXAPOR®AQUA: 7 µm.
4.7. UMPC2 045 – Advanced Mobile Oil Analysis and Filtration Unit
Product model: UMPC2 045
The UMPC2 045 is an advanced mobile fluid management system combining oil filtration, oil condition monitoring and data management.
Key features:
Adjustable flow rate: 20–70 L/min / 5.3–18.5 gpm.
Integrated particle monitoring.
Humidity sensor.
Temperature measurement.
Touchscreen control panel.
Automatic shut-off function.
Dosing function.
Internal measurement data storage.
USB data transfer.
Optional built-in printer.
Filter dirt-holding capacity up to 4,000 g.
Available filter element codes:
V7.1560-103: 3 µm.
V7.1560-03: 5 µm.
V7.1560-06: 10 µm.
Z7.1560-103: 3 µm EXAPOR®SPARK PROTECT.
Y7.1560-05: 7 µm EXAPOR®AQUA.
The UMPC2 is designed for industrial maintenance operations where oil cleanliness and fluid condition need to be measured, recorded and managed systematically.
4.8. MFNA – Modular Off-Line Filtration System
Product models:
MFNA1-016
MFNA1-045
MFNAPC1-016
MFNAPC1-045
The MFNA is a modular off-line filtration system that can be expanded with an oil particle monitoring module.
Technical specifications:
| Model | Nominal flow | Maximum operating pressure |
|---|---|---|
| MFNA1-016 | 16 L/min / 4.2 gpm | 5 bar / 72 psi |
| MFNA1-045 | 45 L/min / 11.9 gpm | 7 bar / 101 psi |
Main features:
Modular filtration design.
Integrated ON/OFF motor switch.
Suitable for installation in mobile service trolleys.
EXAPOR®MAX filter elements.
EXAPOR®AQUA water-absorbing filter options.
EXAPOR®SPARK PROTECT filter options.
Upgrade capability with a particle monitoring kit.
Particle monitor upgrade kits:
MK1-PC-016: For MFNA1-016.
MK1-PC-045: For MFNA1-045.
Filter element codes for the 16 L/min version:
V7.1220-113: 3 µm.
V7.1220-13: 5 µm.
V7.1220-06: 10 µm.
Y7.1220-05: 7 µm EXAPOR®AQUA.
Y7.1220-113: 3 µm EXAPOR®AQUA.
Z7.1220-113: 3 µm EXAPOR®SPARK PROTECT.
Filter element codes for the 45 L/min version:
V7.1560-103: 3 µm.
V7.1560-03: 5 µm.
V7.1560-06: 10 µm.
Y7.1560-05: 7 µm EXAPOR®AQUA.
Z7.1560-103: 3 µm EXAPOR®SPARK PROTECT.
5. Specialized Oil Service Units
5.1. FA 003-2341 – Oil Service Unit for High-Viscosity Gear Applications
Product code: FA 003-2341
The FA 003-2341 is designed for filling and cleaning hydraulic and lubrication systems containing high-viscosity fluids.
It is particularly suitable for gearbox and transmission applications, including wind turbine azimuth gear lubrication systems.
Technical specifications:
Nominal flow rate: 3 L/min / 0.8 gpm.
Filter efficiency: β5(c) = 200.
Dirt-holding capacity: 460 g.
Electric motor: 3-phase, 400 V, 50 Hz.
Motor power: 0.25 kW.
Maximum operating pressure: 6 bar / 87 psi.
Viscosity range: 15–5,000 mm²/s.
Replacement filter element: V7.1220-13.
5.2. FA 016-1160 – High-Pressure Oil Filling and Filtration Unit
Product code: FA 016-1160
The FA 016-1160 is designed for filling and cleaning hydraulic and lubrication systems.
Its 30-bar operating pressure capability makes it suitable for applications such as filling and filtering transmission fluids through valve blocks.
Technical specifications:
Nominal flow rate: 16 L/min / 4.2 gpm.
Maximum operating pressure: 30 bar / 435 psi.
Filter efficiency: β3(c) = 200.
Dirt-holding capacity: 280 g.
Electric motor: 230 V, 50 Hz.
Motor power: 1.5 kW.
Optical differential pressure clogging indicator.
Replacement filter element: V7.1220-163.
6. OPS 010 and OPS 550 – Hydraulic Oil Dewatering Systems
Water contamination in hydraulic and lubrication oils can cause corrosion, reduced lubrication performance and accelerated oil oxidation.
The ARGO-HYTOS OPS series is designed to remove substantial quantities of free water from hydraulic and lubrication fluids.
6.1. OPS 010
Product code: OPS 010
Technical specifications:
Nominal flow rate: 10 L/min / 2.6 gpm.
Filter rating: 5 µm.
Power supply: 3-phase, 400 V.
Maximum power: 7.4 kW.
Viscosity range: 10–700 mm²/s.
Dewatering rate: 0.9 L/hour.
Replacement filter element: V7.1230-53.
Dirt-holding capacity: 220 g.
Weight: 160 kg.
6.2. OPS 550
Product code: OPS 550
The OPS 550 is designed for larger industrial systems requiring higher oil processing capacity.
Technical specifications:
Nominal flow rate: 50 L/min / 13.2 gpm.
Filter rating: 5 µm.
Power supply: 3-phase, 400 V.
Maximum power: 13 kW.
Viscosity range: 15–500 mm²/s.
Dewatering rate: 1.65 L/hour.
Replacement filter element: V7.1560-03.
Dirt-holding capacity: 600 g.
Weight: 730 kg.
The catalog specifies these typical dewatering rates using 200 liters of oil with an initial water content above 10,000 ppm. Actual performance depends on oil temperature, viscosity, initial water contamination and operating conditions.
7. EXAPOR®AQUA – Water-Absorbing Hydraulic Filter Elements
EXAPOR®AQUA is a specialized filter element technology designed to remove free water and solid particles from hydraulic and lubrication oils.
It combines water-absorbing filter layers with multi-layer microfiber filter media.
Main filter element codes:
| Filter element code | Filter rating | Water capacity |
|---|---|---|
| Y7.1560-05 | 7 µm | 1,520 ml |
| Y7.1220-113 | 3 µm | 340 ml |
| Y7.1220-05 | 7 µm | 370 ml |
| Y7.1230-153 | 3 µm | 520 ml |
Compatible product families:
Y7.1560-05: FNA 045, UM 045 and UMPC 045.
Y7.1220-113: FA 008, FA 016, FAPC 016, FNA 008 and FNA 016.
Y7.1220-05: FA 008, FA 016, FAPC 016, FNA 008 and FNA 016.
Y7.1230-153: FN 060, FNS 060 and FNA 040.
EXAPOR®AQUA is intended for applications involving relatively small quantities of free water combined with particulate contamination. For substantial water contamination, oil replacement, system flushing or dedicated dewatering equipment should also be considered.
8. Filtration Accessories and Replacement Components
8.1. FA 016.1775 – Suction Strainer Set
Product code: FA 016.1775
The FA 016.1775 is a suction strainer accessory designed to provide pump protection in oil service units and compatible off-line filtration systems.
Compatible models:
FA 014.
FA 016.
FAPC 016.
FNA 008.
FNA 016.
Main characteristics:
Filter fineness: 200 µm.
Replaceable suction strainer element.
DN25 hose connection.
360-degree rotatable connection design.
Replacement strainer element:
S3.0405-02.
8.2. FNA 008.1700 – Mounting Set
Product code: FNA 008.1700
The FNA 008.1700 mounting set provides a practical connection between off-line filtration equipment and hydraulic reservoirs.
It can also serve as a service connection for compatible oil service units.
Compatible products:
FNA 008.
FNA 016.
FA 014.
FA 016.
FAPC 016.
8.3. MFNA Accessories
The MFNA product family includes several hose, lance and connection accessories.
Main accessory codes:
MH20/2: DN20 transparent hose, 2 m.
MH25/2: DN25 transparent hose, 2 m.
MH32/3: DN32 transparent hose, 3 m.
LA 20X400: DN20 aluminum lance, 400 mm.
LA 20X1000: DN20 aluminum lance, 1,000 mm.
LA 25X400: DN25 aluminum lance, 400 mm.
LA 25X1000: DN25 aluminum lance, 1,000 mm.
LA 32X400: DN32 aluminum lance, 400 mm.
LA 32X1000: DN32 aluminum lance, 1,000 mm.
41148000: G1 / 15/16-12 UN-2B suction adapter.
34198300: G¾ / 11/16-12 UN-2B return adapter.
S9.0417-13: 280 µm suction strainer replacement element.
9. EXAPOR®MAX, EXAPOR®AQUA and EXAPOR®SPARK PROTECT Technologies
Different filter media are available to address specific hydraulic oil contamination and operating conditions.
EXAPOR®MAX 2
EXAPOR®MAX 2 is a multi-layer microfiber filter technology designed for efficient solid particle separation.
Main advantages:
High particle separation efficiency.
High dirt-holding capacity.
Low pressure drop.
Extended filter service intervals.
EXAPOR®AQUA
EXAPOR®AQUA combines solid particle filtration with free-water absorption.
It is particularly suitable for hydraulic and lubrication systems where both particulate contamination and small quantities of free water need to be controlled.
EXAPOR®SPARK PROTECT
EXAPOR®SPARK PROTECT is designed for hydraulic oils with low electrical conductivity, providing protection against electrostatic discharge.
The catalog identifies applications with oil electrical conductivity below 500 pS/m at 20 °C.
10. ISO Standards for Hydraulic Filtration Performance
The ARGO-HYTOS catalog identifies the following standards for filter element quality control and performance evaluation:
ISO 16889: Multi-pass filter testing, filtration efficiency and dirt-holding capacity.
ISO 2941: Collapse and burst pressure verification.
ISO 2942: Filter element manufacturing integrity and bubble point testing.
ISO 2943: Material compatibility with hydraulic fluids.
ISO 3968: Pressure drop versus flow characteristics.
ISO 23181: Flow fatigue resistance using high-viscosity fluids.
Proper filter selection should consider more than nominal micron ratings. Beta ratio, dirt-holding capacity, flow rate, oil viscosity and operating pressure must also be evaluated.
11. How to Select the Right Off-Line Filtration System
The following factors should be considered when selecting an industrial hydraulic oil filtration unit.
1. Reservoir capacity
The filtration flow rate should be selected according to the oil volume, contamination level and required cleanliness target.
2. Oil viscosity
Standard filtration units and high-viscosity models must be evaluated separately. FNA1HV and FA1HV models are designed for extended viscosity ranges.
3. Operating pressure
High-pressure applications may require specialized solutions such as the FNS series with pressure-compensated flow control.
4. Filtration rating
The appropriate 3, 5 or 10 µm element should be selected according to component sensitivity and the required oil cleanliness target.
5. Water contamination
EXAPOR®AQUA elements are suitable for removing free water and solid particles together. For higher water contamination, dedicated dewatering systems such as OPS 010 and OPS 550 should be considered.
6. Oil condition monitoring
Where continuous monitoring and measurement records are required, products equipped with OPCom particle monitors and LubCos oil condition sensors can be evaluated.
7. Fixed or mobile operation
Fixed installation solutions such as FNA and FN series filters should be distinguished from portable service equipment such as FA, UM and CFP units.
12. Frequently Asked Questions
What is off-line hydraulic oil filtration?
Off-line filtration is a process in which hydraulic oil is circulated through a separate filtration circuit, independent of the main hydraulic operating circuit. It allows oil cleanliness to be improved without changing the main machine operating cycle.
What is EXAPOR®AQUA used for?
EXAPOR®AQUA is a water-absorbing filter element designed to remove free water and solid particles from hydraulic and lubrication oils.
What is the difference between the FN and FNA product series?
The FN series primarily consists of filter housings and filter elements. The FNA series includes motor-driven pumps and integrated off-line filtration units.
What is the difference between FNA1 and FNAPC1?
The FNA1 series provides standard off-line filtration. FNAPC1 adds integrated OPCom particle monitoring to continuously measure oil cleanliness.
Which ARGO-HYTOS products are suitable for high-viscosity oils?
The FNA1HV and FA1HV series are designed for high-viscosity applications. The FA 003-2341 is another specialized oil service unit with a catalog-listed viscosity range of up to 5,000 mm²/s.
How can large quantities of water be removed from hydraulic oil?
EXAPOR®AQUA elements can remove smaller quantities of free water. For higher water contamination, dedicated dewatering equipment such as OPS 010 and OPS 550 should be evaluated.
How can hydraulic oil cleanliness be monitored?
OPCom particle monitors measure particulate contamination and oil cleanliness. LubCos sensors can additionally measure relative humidity, temperature and other oil condition parameters, depending on the sensor version.
Conclusion: Proactive Fluid Management for Reliable Hydraulic Systems
Hydraulic oil cleanliness management involves more than replacing filters at scheduled intervals. Effective fluid management requires appropriate filtration technology, correct filter element selection, oil condition monitoring and, where necessary, dedicated dewatering processes.
The ARGO-HYTOS Fluid Management portfolio provides a comprehensive range of solutions, from compact off-line filters and mobile oil service units to advanced particle monitoring systems and industrial dewatering equipment.
HİDROMAN provides engineering-focused solutions for hydraulic filtration, oil cleanliness management, off-line filtration and industrial fluid management applications.
Prevent failures before they happen – not after the damage is done.
