
Alfagomma Hydraulic Hose | High-Pressure Hose Technical Guide
Alfagomma Hydraulic Hose: Technical Specifications, High-Pressure Hoses and Selection Guide
Selecting the correct hydraulic hose requires evaluating several technical parameters, including working pressure, flow rate, temperature, fluid compatibility, mechanical movement and connection requirements. An incorrectly selected hose can cause pressure losses, overheating, premature wear, connection leakage and unplanned equipment downtime.
Alfagomma hydraulic hoses provide a broad range of solutions for different pressure levels and operating conditions, from mobile hydraulic systems to heavy industrial applications. Its product portfolio includes wire-braided, spiral-reinforced, compact, thermoplastic and PTFE hydraulic hoses.
This guide covers Alfagomma hydraulic hose series, product standards, high-pressure hose types, hose selection, fitting compatibility and installation requirements.
What Is an Alfagomma Hydraulic Hose?
Alfagomma hydraulic hoses are flexible pressure components designed to transfer hydraulic oil and other compatible fluids between components of a hydraulic system.
A standard hydraulic hose consists of three main layers:
Inner Tube: The internal layer that comes into contact with hydraulic oil or the conveyed fluid. It is essential for fluid compatibility.
Reinforcement Layer: Made from textile, steel wire braid or steel wire spiral reinforcement. It provides the structural strength required to withstand internal pressure.
Outer Cover: Protects the hose against abrasion, ozone, weather conditions and external mechanical damage.
The working pressure, temperature limits, flexibility and minimum bend radius depend on the hose materials and reinforcement construction.
Alfagomma's hydraulic hose portfolio includes:
Single and double steel wire braid hoses
Multispiral high-pressure hydraulic hoses
Compact hydraulic hoses
Textile-reinforced hoses
Thermoplastic hydraulic hoses
PTFE hoses
High-temperature and special-application hoses
Alfagomma Hydraulic Hose Series and Technical Characteristics
Alfagomma offers different hose series for a wide range of operating pressures and application requirements. A hose classification alone does not guarantee a specific working pressure. The actual pressure rating must be verified against the selected model, nominal diameter and manufacturer's technical documentation.
1. Alfagomma 1SN / SAE 100 R1AT Hydraulic Hose
Alfagomma 1SN hoses feature a single steel wire braid reinforcement. They are used in medium- and high-pressure hydraulic applications, including general-purpose mobile and industrial hydraulic systems.
Typical applications include:
Hydraulic power units
Construction equipment
Agricultural machinery
Mobile hydraulic systems
Industrial machinery
Hydraulic cylinder connections
Depending on the specific product configuration, Alfagomma FLEXOR 1SN hoses are associated with EN 853 1SN and SAE 100 R1AT classifications.
2. Alfagomma 2SN / SAE 100 R2AT Hydraulic Hose
Alfagomma 2SN hoses feature two steel wire braid reinforcement layers. They are designed for applications requiring different and generally higher pressure capabilities than single-wire-braid hose constructions.
Typical applications include:
Excavators and wheel loaders
Cranes and lifting systems
Hydraulic presses
Agricultural machinery
Industrial hydraulic circuits
Mobile construction equipment
The FLEXOR 2SN product family is associated with EN 853 2SN and SAE 100 R2AT classifications, depending on the specific product variant.
3. Alfagomma 4SP High-Pressure Hydraulic Hose
Alfagomma 4SP is a multispiral high-pressure hydraulic hose featuring multiple steel wire spiral reinforcement layers.
It is designed for demanding applications involving high pressure and dynamic loading.
Typical applications include:
Heavy construction equipment
Hydraulic presses
Mining machinery
Industrial hydraulic systems
High-pressure power units
Heavy-duty mobile hydraulic applications
4SP hoses are associated with the EN 856 4SP classification. The actual working pressure, temperature range and minimum bend radius must be verified for the specific hose diameter and model.
4. Alfagomma 4SH High-Pressure Hydraulic Hose
Alfagomma 4SH hoses are multispiral hydraulic hoses designed for high-pressure and heavy-duty operating conditions.
Typical applications include:
Heavy construction equipment
Mining machinery
Hydraulic press systems
High-pressure hydraulic lines
Industrial production machinery
Heavy-duty mobile equipment
4SH hoses are associated with the EN 856 4SH classification. When choosing between 4SP and 4SH, consider not only pressure rating but also hose diameter, operating cycles, dynamic pressure fluctuations, temperature and installation conditions.
5. Alfagomma R12, R13 and R15 Spiral Hydraulic Hoses
R12, R13 and R15 are spiral-reinforced hydraulic hose classifications used in high-pressure applications.
They are considered for systems exposed to demanding mechanical loads, pressure fluctuations and heavy operating conditions.
Typical applications include:
Large construction equipment
Mining and quarrying machinery
Heavy industrial equipment
High-pressure hydraulic systems
Heavy-duty mobile machinery
R12, R13 and R15 should not be treated as direct substitutes for one another. Selection must be based on pressure class, reinforcement construction, diameter, bend radius and the applicable product specification.
6. Alfagomma R16, R17 and R19 Compact Hydraulic Hoses
Compact hydraulic hoses can provide easier routing and installation in machinery with limited space.
Typical applications include:
Compact construction equipment
Forklifts
Agricultural machinery
Mobile hydraulic systems
Machines with restricted installation space
Hydraulic control circuits
The benefit of compact hoses is not limited to their smaller outside diameter. Depending on the selected model, they can also provide installation and bend-radius advantages. Dynamic movement and manufacturer installation requirements must still be considered.
7. Alfagomma R3 and R6 Textile-Reinforced Hoses
Textile-reinforced hydraulic hoses can be used in low- or medium-pressure applications, depending on the specific product design.
R3 and R6 hose families should be selected according to their applicable product standards and technical specifications.
Typical applications include:
Low-pressure hydraulic lines
Auxiliary hydraulic circuits
Certain return and control lines
Compatible industrial fluid transfer applications
These hoses should not be considered equivalent to high-pressure spiral-reinforced hydraulic hoses.
8. Alfagomma R7 and R8 Thermoplastic Hoses
Thermoplastic hydraulic hoses provide solutions for different pressure, temperature and fluid requirements, depending on their construction.
Typical applications include:
Mobile hydraulic systems
Control lines
Compact machinery
Special hydraulic applications
Selected industrial circuits
When selecting a thermoplastic hose, consider the inner tube material, outer cover, working pressure, temperature and fluid compatibility.
9. Alfagomma PTFE Hoses
PTFE hoses are used in applications requiring specific chemical compatibility, temperature resistance or fluid-handling characteristics, depending on the product design.
Potential applications include:
Special fluid transfer
Chemical compatibility requirements
High-temperature applications
Specialized industrial processes
PTFE hoses are not direct replacements for standard rubber hydraulic hoses. Selection must be based on fluid chemistry and the manufacturer's technical limits.
Alfagomma Hydraulic Hose Standards
Different Alfagomma hose families are associated with international standards according to their construction and intended application.
Standard | Relevant hose family / scope |
|---|---|
EN 853 | Wire-braided hose classifications such as 1SN and 2SN |
EN 854 | Certain textile-reinforced hydraulic hoses |
EN 856 | 4SP, 4SH and related spiral hose classifications |
EN 857 | Compact hose classifications such as 1SC and 2SC |
ISO 1436 | Wire-braided rubber hydraulic hoses |
ISO 11237 | Compact hydraulic hoses |
ISO 18752 | Hydraulic hoses with defined performance and pressure classifications |
SAE J517 | Hydraulic hose performance and product requirements |
Important: Standard references must be verified against the exact hose model and product code. Two hoses with the same nominal diameter may have different pressure ratings, temperature limits and minimum bend radii.
Alfagomma ISO 18752 Isobaric Hydraulic Hoses
ISO 18752 is an important standard for evaluating hydraulic hoses according to defined pressure and performance classifications.
Under the isobaric hose concept, a product family is designed around a specified pressure class. This can allow different hose diameters within a product family to be evaluated according to defined performance categories.
Alfagomma's portfolio includes multispiral and high-performance hose families associated with ISO 18752. The Alfabiotech range is among the product families in this category.
When selecting an ISO 18752 hydraulic hose, consider:
The relevant ISO 18752 pressure class
Nominal hose diameter
Operating temperature
Pressure fluctuations and cycle conditions
Minimum bend radius
Compatible fitting and crimping combination
An ISO 18752 classification does not mean that a hose can be used without limitations under every operating condition. The current product datasheet remains the reference for final selection.
Alfagomma Hydraulic Hoses for High-Temperature Applications
Temperature affects the service life of both the inner tube and outer cover of a hydraulic hose.
Using an unsuitable hose at elevated temperatures can cause:
Inner tube deterioration
Hardening or cracking of the outer cover
Reduced hose flexibility
Reinforcement damage
Shortened service life
Alfagomma offers dedicated hose products for high-temperature applications. For example, the technical documentation for the FLEXOPAK 2 HT specifies a continuous operating temperature range of -40 °C to +135 °C.
This temperature range applies to the specified product and should not be assumed for other Alfagomma hose series.
When selecting a hose, hydraulic oil temperature and ambient temperature should be evaluated separately. Contact with hot surfaces, operating cycles and environmental conditions must also be considered.
How to Select the Right Alfagomma Hydraulic Hose
Hydraulic hose selection should not be based solely on pressure rating or brand name. All operating requirements must be evaluated together.
1. Working Pressure and Pressure Surges
The hose's working pressure must meet the actual operating requirements of the hydraulic system.
The following parameters should be considered:
Nominal working pressure
Maximum system pressure
Pressure peaks
Dynamic loads
Pressure cycles
Even if a system operates at a nominal pressure of 250 bar, pressure fluctuations during operation may require additional consideration. Selecting a hose based only on the nominal 250 bar value may not be sufficient.
2. Hose Inner Diameter and Flow Rate
Hose inner diameter should be selected according to the required flow rate and target fluid velocity.
Incorrect hose sizing can cause:
Increased fluid velocity
Higher pressure losses
Hydraulic oil overheating
Energy losses
Noise and vibration
System flow rate, hose length and acceptable fluid velocity should all be considered when determining the correct hose diameter.
3. Operating Temperature
Both continuous and intermittent temperature limits must be checked.
Hydraulic oil temperature, ambient temperature and external surface temperature may differ. Hose selection should account for all relevant conditions.
4. Fluid Compatibility
The chemical properties, additives and operating temperature of the hydraulic fluid must be compatible with the hose's inner tube material.
Not every hose is suitable for every hydraulic oil or chemical fluid. Always check the manufacturer's fluid compatibility documentation.
5. Minimum Bend Radius
Installing a hose below the manufacturer's specified minimum bend radius can damage its reinforcement layer and overall structure.
For mobile equipment, the complete movement cycle must be evaluated rather than considering only the static installation position.
6. Connection Type and Fitting Compatibility
Correct fitting selection is just as important as selecting the right hose.
Common hydraulic connection standards include:
BSP
BSPT
NPT
JIC
ORFS
SAE
Metric
The hose and fitting combination must be selected according to the connection standard, dimensions, pressure rating and manufacturer's compatibility requirements.
7. Operating Environment and External Protection
The environment in which the hose operates also directly affects selection.
Consider the following conditions:
Abrasion and friction
Ozone and UV exposure
Oil and chemical contact
High ambient temperatures
Vibration and mechanical movement
Impact and crushing risks
Suitable outer covers or additional hose protection may be required for demanding operating conditions.
Why Are Fittings and Crimping Important for Alfagomma Hoses?
The reliability of a hydraulic hose assembly depends on more than hose quality. The hose, fitting, ferrule and crimp diameter must all be correctly matched.
Incorrect combinations or crimping procedures can cause:
Hose separation from the fitting
Connection failure under pressure
Hydraulic fluid leakage
Damage to the hose structure
Machine downtime
Workplace safety hazards
When assembling Alfagomma hoses, always use the manufacturer's current crimping tables for the specific hose and fitting combination.
Crimp diameter must never be estimated. Crimping specifications for different hose and fitting combinations are not interchangeable.
Common Hydraulic Hose Installation Mistakes
Many hydraulic hose failures can be linked to incorrect selection, improper installation or unsuitable operating conditions.
Common mistakes include:
Installing below the minimum bend radius: Excessive bending can damage the reinforcement structure.
Twisting the hose during installation: Torsional stress can create serious mechanical loads, particularly in moving systems.
Using incorrect fittings: Incompatible hose and fitting standards can reduce connection reliability.
Leaving the hose exposed to abrasion: Continuous contact with moving machine components can wear through the outer cover.
Incorrectly evaluating working pressure: Selecting a hose based only on nominal pressure may be insufficient in systems subject to pressure surges.
Using the wrong crimp diameter: Incorrect crimping can cause hose separation or damage to the hose structure.
Applications of Alfagomma Hydraulic Hoses
Depending on the product series and technical specifications, Alfagomma hydraulic hoses can be used across a wide range of industries.
Typical applications include:
Construction equipment
Hydraulic presses
Agricultural machinery
Forklifts
Cranes and lifting systems
Mobile hydraulic systems
Hydraulic power units
Steel and iron industries
Mining machinery
Industrial production lines
Energy applications
Marine and shipyard equipment
For critical applications, the required industry approvals and certifications should be checked for the specific product, in addition to its hose standard. The manufacturer's documentation lists different approvals for different product families.
Alfagomma Hydraulic Hose Maintenance and Service Life
Hose service life depends on operating pressure, temperature, fluid compatibility, installation quality and environmental conditions.
Regular inspections should include checks for:
Cracks in the outer cover
Bulging or deformation
Abrasion and cuts
Exposed reinforcement wires
Hydraulic fluid leakage
Movement or looseness around fittings
Excessive bending
Heat-related damage
Hoses should be stored away from direct sunlight, ozone sources, excessive temperatures and mechanical damage.
Damaged hoses or hose assemblies that are no longer reliable for service should not be kept in operation using temporary repair methods. They should be replaced with an assembly that meets the technical requirements of the application.
Alfagomma Hydraulic Hose Selection and Hose Manufacturing with Hidroman
Correct hydraulic hose selection is essential for system safety and operational reliability.
Hidroman provides solutions for industrial hydraulic hose applications, including hose selection and manufacturing, fitting selection, crimping and testing processes.
The following information is important when evaluating a hose requirement:
Machine or system where the hose will be installed
Required hose inner diameter
Working and maximum pressure
Hydraulic oil or conveyed fluid
Operating temperature
Hose length
Connection type and dimensions
Movement and bending conditions
Required testing and quality control procedures
Hidroman's hose manufacturing processes support quality control through digitally controlled production, appropriate crimping, flushing and testing applications. Hose tests are planned according to the technical requirements of the specific hose and fitting assembly.
Correct hose selection, compatible fittings and controlled crimping are the foundation of reliable hydraulic hose assemblies.
Contact Hidroman for Alfagomma hydraulic hose selection, technical evaluation or custom hydraulic hose manufacturing.
Frequently Asked Questions
Are Alfagomma hydraulic hoses high quality?
Alfagomma is an international manufacturer with a broad portfolio of hydraulic hoses, fittings and connection components. When selecting a product, its technical specifications and application compatibility should be evaluated alongside the brand.
Which standards are used for Alfagomma hydraulic hoses?
Depending on the product family, Alfagomma hoses are associated with standards including EN 853, EN 854, EN 856, EN 857, ISO 1436, ISO 11237, ISO 18752 and SAE J517. The exact standard should be confirmed using the current datasheet for the selected product.
What is the difference between Alfagomma 1SN and 2SN?
The main difference is the reinforcement construction. 1SN hoses have a single steel wire braid, while 2SN hoses have two steel wire braid layers. Working pressure and applications vary according to hose diameter and product specifications.
What is the difference between Alfagomma 4SP and 4SH?
Both are spiral-reinforced high-pressure hydraulic hose classifications. Their technical differences are defined by the applicable EN classification and product construction. Selection should consider pressure, diameter, temperature, bend radius and operating conditions.
What applications are Alfagomma R15 hoses designed for?
R15 hoses belong to high-pressure and heavy-duty hydraulic hose classifications. Their suitability must be evaluated according to actual pressure and temperature requirements and installation conditions.
What is an Alfagomma ISO 18752 hydraulic hose?
ISO 18752 is a standard covering hydraulic hoses with defined performance and pressure classifications. Alfagomma's portfolio includes multispiral hose families associated with this standard.
How do I determine the correct hydraulic hose diameter?
Hose diameter should primarily be determined according to system flow rate and target fluid velocity. Pressure loss, hose length, temperature and connection requirements should also be considered.
Which fittings should be used with Alfagomma hydraulic hoses?
Fitting selection must be based on the hose model, inner diameter, connection standard, pressure rating and manufacturer-approved hose and fitting combination. BSP, NPT, JIC, ORFS, SAE and Metric connections are used in different applications.
Where can I purchase Alfagomma hydraulic hoses?
The product series, diameter, pressure class and connection requirements should be identified before procurement. Hidroman can provide technical evaluation and quotation support for hydraulic hose selection and hose manufacturing requirements.
